[Fri Sep 30 13:48:24 2011] Detection parameters:
  Position = (226.0, 660.7) = 8 17 45.16 -7 35 56.2
  Extent = 2.2" x 1.2", rotation angle = 100 degrees
  Source counts = 222.8 +/- 15.5
  Background counts = 16.2
  Rate = 0.008 +/- 0.0005

[Fri Sep 30 13:48:25 2011] Off-axis axis estimate = 7.30'
[Fri Sep 30 13:49:33 2011] Using EEF radius (= 2.37 ")to estimate initial spatial extent for simple fitting
[Fri Sep 30 13:49:33 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Sep 30 13:49:33 2011] Initial guess for spatial extent in simple fitting = 2.37"
[Fri Sep 30 13:49:33 2011] source mask rpix=4.8, npix_max = 112, mask sum = 110, frac = 0.975
[Fri Sep 30 13:49:33 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 2.37"
[Fri Sep 30 13:49:34 2011] fullrun_ccd2_acisf02211_pi14-548_cl_pass0_src1.ximg exists
[Fri Sep 30 13:49:34 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf02211_pi14-548_cl_pass0_src1.csv
[Fri Sep 30 13:49:34 2011] fullrun_ccd2_acisf02211_pi14-548_cl_pass0_src1_1.ximg exists
[Fri Sep 30 13:49:34 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf02211_pi14-548_cl_pass0_src1.csv
[Fri Sep 30 13:49:34 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf02211_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf02211_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 13:49:34 2011] fullrun_ccd2_acisf02211_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Fri Sep 30 13:49:34 2011] fullrun_ccd2_acisf02211_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Sep 30 13:49:34 2011] Fit fullrun_ccd2_acisf02211_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Sep 30 13:49:44 2011] Spatial fit model total counts = 253.980000, observed total counts = 252.000000
[Fri Sep 30 13:49:44 2011] Offset between fit and detection position for source 1 = 1.020915 pixels
[Fri Sep 30 13:49:44 2011] 253.867300 total counts/ 35.242300 bgd. counts: snr = 36.827115
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 1.020915 pixels
  Position = (226.7, 661.5) = 8 17 45.15 -7 35 56.1
  Extent = 2.1 (1.8-2.4)", rotation angle = 0
  Source counts = 218.6 +/- 15.9
  Background counts = 35.2
  Rate = 0.007 +/- 0.0005
[Fri Sep 30 13:49:44 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 13:49:44 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 13:49:44 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 13:49:44 2011] Source does appear to be extended
[Fri Sep 30 13:49:44 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 13:50:07 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 30 13:50:07 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Sep 30 13:50:07 2011] Initial guess for spatial extent in simple fitting = 2.08"
[Fri Sep 30 13:50:07 2011] source mask rpix=4.2, npix_max = 89, mask sum = 81, frac = 0.908
[Fri Sep 30 13:50:07 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 2.08"
[Fri Sep 30 13:50:08 2011] fullrun_ccd2_acisf02211_pi14-548_cl_pass1_src1.ximg exists
[Fri Sep 30 13:50:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf02211_pi14-548_cl_pass1_src1.csv
[Fri Sep 30 13:50:08 2011] fullrun_ccd2_acisf02211_pi14-548_cl_pass1_src1_1.ximg exists
[Fri Sep 30 13:50:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf02211_pi14-548_cl_pass1_src1.csv
[Fri Sep 30 13:50:08 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf02211_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf02211_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 13:50:08 2011] fullrun_ccd2_acisf02211_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Fri Sep 30 13:50:08 2011] fullrun_ccd2_acisf02211_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Sep 30 13:50:08 2011] Fit fullrun_ccd2_acisf02211_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Sep 30 13:50:25 2011] Spatial fit model total counts = 251.065000, observed total counts = 249.000000
[Fri Sep 30 13:50:25 2011] Offset between fit and detection position for source 1 = 0.285362 pixels
[Fri Sep 30 13:50:25 2011] 251.355300 total counts/ 51.277300 bgd. counts: snr = 27.940667
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.285362 pixels
  Position = (226.6, 661.7) = 8 17 45.15 -7 35 56.0
  Extent = 1.9 (1.6-2.2)", rotation angle = 0
  Source counts = 200.1 +/- 15.9
  Background counts = 51.3
  Rate = 0.007 +/- 0.0005
[Fri Sep 30 13:50:25 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 13:50:25 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 13:50:25 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 13:50:25 2011] Source does appear to be extended
[Fri Sep 30 13:50:25 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 13:53:43 2011] Not overwriting source region fullrun_ccd2_acisf02211_pi14-548_pass1_cl_src1_src.reg
[Fri Sep 30 13:53:43 2011] Extracting stamp from image fullrun_ccd2_acisf02211_pi14-548_cl_sm2.00.img.gz, (141, 576) - (312, 747)
[Fri Sep 30 13:53:43 2011] Writing fullrun_ccd2_acisf02211_pi14-548_pass1_cl_src1.gif
[Fri Sep 30 13:53:47 2011] ../../acisf02211/products/events/fullrun_ccd2_acisf02211_pi14-548_pass1_cl_src1_src.evt and ../../acisf02211/products/events/fullrun_ccd2_acisf02211_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Fri Sep 30 13:53:47 2011] Size of ../../acisf02211/products/events/fullrun_ccd2_acisf02211_pi14-548_pass1_cl_src1_src.evt.gz[events] = 242 counts
[Fri Sep 30 13:53:47 2011] Mean chipx,y = (828.90, 625.19)
[Fri Sep 30 13:53:47 2011] Mean tdetx,y = (3686.19, 3257.10)
[Fri Sep 30 13:53:47 2011] chipx,y range = (801.00-851.00, 596.00-650.00)
[Fri Sep 30 13:53:47 2011] Size of ../../acisf02211/products/events/fullrun_ccd2_acisf02211_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 140 counts
[Fri Sep 30 13:53:47 2011] ../../acisf02211/products/images/fullrun_ccd2_acisf02211_pi14-548_pass1_cl_src1_src.img and ../../acisf02211/products/images/fullrun_ccd2_acisf02211_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Fri Sep 30 13:53:47 2011] ../../acisf02211/products/spectra/fullrun_ccd2_acisf02211_pi14-548_pass1_cl_src1_src.pi and ../../acisf02211/products/spectra/fullrun_ccd2_acisf02211_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Fri Sep 30 13:53:50 2011] ../../acisf02211/products/lightcurves/fullrun_ccd2_acisf02211_pi14-548_pass1_cl_src1_src.lc and ../../acisf02211/products/lightcurves/fullrun_ccd2_acisf02211_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Fri Sep 30 13:54:37 2011] Keeping rmf generated by specextract
[Fri Sep 30 13:54:38 2011] 175.67
[Fri Sep 30 13:55:06 2011] Updating aperture counts using extracted products
[Fri Sep 30 13:55:06 2011] Error reading totcts from fullrun_ccd2_acisf02211_pi14-548_pass1_cl_src1_src.pi.gz
[Fri Sep 30 13:55:06 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 30 13:55:06 2011] Using photon index=1.80, rate=0.00674, arf fullrun_ccd2_acisf02211_pi14-548_pass1_cl_src1.arf
[Fri Sep 30 13:55:06 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 30 13:55:06 2011] Updating source flux to 8.1e-14
[Fri Sep 30 13:55:14 2011] Reading fit data from acisf02211/analysis//spectral/fullrun_ccd2_acisf02211_pi14-548_pass1_cl_src1_pl.csv
[Fri Sep 30 13:55:14 2011] Spectral fit parameter nH value = 1.465e+21
[Fri Sep 30 13:55:14 2011] Spectral fit parameter PhoIndex value = 1.65888
[Fri Sep 30 13:55:14 2011] Failed to get F(0.3-8.0) from acisf02211/analysis//spectral/fullrun_ccd2_acisf02211_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri Sep 30 13:55:14 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 30 13:55:14 2011] Using Nh = 1.5e+21, photon index=1.66, rate=0.00674, arf fullrun_ccd2_acisf02211_pi14-548_pass1_cl_src1.arf
[Fri Sep 30 13:55:14 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 30 13:55:14 2011] Updating source flux to 8.6e-14