[Mon Oct 17 01:01:09 2011] Detection parameters:
  Position = (44.0, 375.5) = 15 42 5.27 66 16 4.5
  Extent = 1.5" x 1.3", rotation angle = 86 degrees
  Source counts = 61.9 +/- 8.6
  Background counts = 12.1
  Rate = 0.0008 +/- 0.0001

[Mon Oct 17 01:01:12 2011] Off-axis axis estimate = 8.11'
[Mon Oct 17 01:02:16 2011] Using EEF radius (= 2.91 ")to estimate initial spatial extent for simple fitting
[Mon Oct 17 01:02:16 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Oct 17 01:02:16 2011] Initial guess for spatial extent in simple fitting = 2.91"
[Mon Oct 17 01:02:16 2011] source mask rpix=5.9, npix_max = 164, mask sum = 156, frac = 0.951
[Mon Oct 17 01:02:16 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 2.91"
[Mon Oct 17 01:02:17 2011] fullrun_ccd3_acisf02207_pi14-548_cl_pass0_src3.ximg exists
[Mon Oct 17 01:02:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf02207_pi14-548_cl_pass0_src3.csv
[Mon Oct 17 01:02:17 2011] fullrun_ccd3_acisf02207_pi14-548_cl_pass0_src3_1.ximg exists
[Mon Oct 17 01:02:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf02207_pi14-548_cl_pass0_src3.csv
[Mon Oct 17 01:02:17 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf02207_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf02207_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 17 01:02:18 2011] fullrun_ccd3_acisf02207_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Mon Oct 17 01:02:18 2011] fullrun_ccd3_acisf02207_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Mon Oct 17 01:02:18 2011] Fit fullrun_ccd3_acisf02207_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Mon Oct 17 01:02:38 2011] Spatial fit model total counts = 95.946900, observed total counts = 96.000000
[Mon Oct 17 01:02:38 2011] Offset between fit and detection position for source 2 = 0.909515 pixels
[Mon Oct 17 01:02:38 2011] 96.122800 total counts/ 34.414100 bgd. counts: snr = 10.519090
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.909515 pixels
  Position = (44.0, 376.4) = 15 42 5.31 66 16 4.7
  Extent = 2.1 (1.6-2.9)", rotation angle = 0
  Source counts = 61.7 +/- 9.8
  Background counts = 34.4
  Rate = 0.0008 +/- 0.0001
[Mon Oct 17 01:02:38 2011] Vigneting correction estimate = 1.000000
[Mon Oct 17 01:02:38 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 17 01:02:38 2011] Assessing source extent using major axis lower bound
[Mon Oct 17 01:02:38 2011] Source does appear to be extended
[Mon Oct 17 01:02:38 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 17 01:03:02 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Oct 17 01:03:02 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Oct 17 01:03:02 2011] Initial guess for spatial extent in simple fitting = 2.08"
[Mon Oct 17 01:03:02 2011] source mask rpix=4.2, npix_max = 89, mask sum = 90, frac = 1.005
[Mon Oct 17 01:03:02 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 2.08"
[Mon Oct 17 01:03:02 2011] fullrun_ccd3_acisf02207_pi14-548_cl_pass1_src3.ximg exists
[Mon Oct 17 01:03:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf02207_pi14-548_cl_pass1_src3.csv
[Mon Oct 17 01:03:02 2011] fullrun_ccd3_acisf02207_pi14-548_cl_pass1_src3_1.ximg exists
[Mon Oct 17 01:03:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf02207_pi14-548_cl_pass1_src3.csv
[Mon Oct 17 01:03:02 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf02207_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf02207_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 17 01:03:03 2011] fullrun_ccd3_acisf02207_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Mon Oct 17 01:03:03 2011] fullrun_ccd3_acisf02207_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Mon Oct 17 01:03:03 2011] Fit fullrun_ccd3_acisf02207_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Mon Oct 17 01:03:20 2011] Spatial fit model total counts = 78.828800, observed total counts = 79.000000
[Mon Oct 17 01:03:20 2011] Offset between fit and detection position for source 2 = 0.736384 pixels
[Mon Oct 17 01:03:20 2011] 78.036600 total counts/ 13.247400 bgd. counts: snr = 17.800709
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.736384 pixels
  Position = (44.5, 377.0) = 15 42 5.27 66 16 5.0
  Extent = 2.2 (1.5-2.9)", rotation angle = 0
  Source counts = 64.8 +/- 8.8
  Background counts = 13.2
  Rate = 0.0008 +/- 0.0001
[Mon Oct 17 01:03:20 2011] Vigneting correction estimate = 1.000000
[Mon Oct 17 01:03:20 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 17 01:03:20 2011] Assessing source extent using major axis lower bound
[Mon Oct 17 01:03:20 2011] Source does appear to be extended
[Mon Oct 17 01:03:20 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 17 01:13:16 2011] Not overwriting source region fullrun_ccd3_acisf02207_pi14-548_pass1_cl_src2_src.reg
[Mon Oct 17 01:13:16 2011] Extracting stamp from image fullrun_ccd3_acisf02207_pi14-548_cl_sm2.00.img.gz, (0, 278) - (143, 476)
[Mon Oct 17 01:13:16 2011] Writing fullrun_ccd3_acisf02207_pi14-548_pass1_cl_src2.gif
[Mon Oct 17 01:13:31 2011] ../../acisf02207/products/events/fullrun_ccd3_acisf02207_pi14-548_pass1_cl_src2_src.evt and ../../acisf02207/products/events/fullrun_ccd3_acisf02207_pi14-548_pass1_cl_src2_bgd.evt exist, delete to re-create
[Mon Oct 17 01:13:32 2011] Size of ../../acisf02207/products/events/fullrun_ccd3_acisf02207_pi14-548_pass1_cl_src2_src.evt.gz[events] = 89 counts
[Mon Oct 17 01:13:32 2011] Mean chipx,y = (21.48, 702.74)
[Mon Oct 17 01:13:32 2011] Mean tdetx,y = (4429.26, 3082.48)
[Mon Oct 17 01:13:32 2011] chipx,y range = (2.00-48.00, 679.00-733.00)
[Mon Oct 17 01:13:32 2011] Size of ../../acisf02207/products/events/fullrun_ccd3_acisf02207_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 112 counts
[Mon Oct 17 01:13:32 2011] ../../acisf02207/products/images/fullrun_ccd3_acisf02207_pi14-548_pass1_cl_src2_src.img and ../../acisf02207/products/images/fullrun_ccd3_acisf02207_pi14-548_pass1_cl_src2_bgd.img exist, delete to re-create
[Mon Oct 17 01:13:32 2011] Not generating rmf since there are only 64 counts
[Mon Oct 17 01:13:32 2011] arf not found, will run specextract
[Mon Oct 17 01:13:33 2011] ../../acisf02207/products/spectra/fullrun_ccd3_acisf02207_pi14-548_pass1_cl_src2_bkg.pi not found
[Mon Oct 17 01:13:33 2011] ../../acisf02207/products/spectra/fullrun_ccd3_acisf02207_pi14-548_pass1_cl_src2.warf not found
[Mon Oct 17 01:13:33 2011] ../../acisf02207/products/spectra/fullrun_ccd3_acisf02207_pi14-548_pass1_cl_src2.wrmf not found
[Mon Oct 17 01:13:33 2011] Removal of ../../acisf02207/products/spectra/fullrun_ccd3_acisf02207_pi14-548_pass1_cl_src2.soff failed
[Mon Oct 17 01:13:34 2011] Failed to rename ../../acisf02207/products/spectra/fullrun_ccd3_acisf02207_pi14-548_pass1_cl_src2_grp.pi to ../../acisf02207/products/spectra/fullrun_ccd3_acisf02207_pi14-548_pass1_cl_src2_src.pi
[Mon Oct 17 01:13:40 2011] ../../acisf02207/products/lightcurves/fullrun_ccd3_acisf02207_pi14-548_pass1_cl_src2_src.lc and ../../acisf02207/products/lightcurves/fullrun_ccd3_acisf02207_pi14-548_pass1_cl_src2_bgd.lc exist, delete to re-create
[Mon Oct 17 01:17:48 2011] No arf file found
[Mon Oct 17 01:18:02 2011] Updating aperture counts using extracted products
[Mon Oct 17 01:18:02 2011] Error reading totcts from fullrun_ccd3_acisf02207_pi14-548_pass1_cl_src2_src.pi
[Mon Oct 17 01:18:02 2011] No arf file for this source, not re-computing flux
[Mon Oct 17 01:18:09 2011] Source 2 has fewer than 100.000000 counts, skipping spectral fitting
[Mon Oct 17 01:18:10 2011] acisf02207/analysis//spectral/fullrun_ccd3_acisf02207_pi14-548_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete