[Sat Oct 29 19:12:50 2011] Detection parameters:
  Position = (542.8, 181.7) = 11 13 34.63 17 33 21.8
  Extent = 1.9" x 1.0", rotation angle = 101 degrees
  Source counts = 57.2 +/- 7.9
  Background counts = 4.8
  Rate = 0.002 +/- 0.0003

[Sat Oct 29 19:12:50 2011] Off-axis axis estimate = 6.42'
[Sat Oct 29 19:13:37 2011] Using EEF radius (= 1.85 ")to estimate initial spatial extent for simple fitting
[Sat Oct 29 19:13:37 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Oct 29 19:13:37 2011] Initial guess for spatial extent in simple fitting = 1.85"
[Sat Oct 29 19:13:37 2011] source mask rpix=3.8, npix_max = 72, mask sum = 72, frac = 0.995
[Sat Oct 29 19:13:37 2011] Giving source the simple spatial ID 5 for pass 0, mean size = 1.85"
[Sat Oct 29 19:13:38 2011] fullrun_ccd3_acisf02205_pi14-548_cl_pass0_src5.ximg exists
[Sat Oct 29 19:13:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf02205_pi14-548_cl_pass0_src5.csv
[Sat Oct 29 19:13:38 2011] fullrun_ccd3_acisf02205_pi14-548_cl_pass0_src5_1.ximg exists
[Sat Oct 29 19:13:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf02205_pi14-548_cl_pass0_src5.csv
[Sat Oct 29 19:13:38 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf02205_pi14-548_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf02205_pi14-548_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 29 19:13:38 2011] fullrun_ccd3_acisf02205_pi14-548_cl_pass0_tfrozen_src5.ximg exists
[Sat Oct 29 19:13:38 2011] fullrun_ccd3_acisf02205_pi14-548_cl_pass0_tfrozen_src5_1.ximg exists
[Sat Oct 29 19:13:38 2011] Fit fullrun_ccd3_acisf02205_pi14-548_cl_pass0_tfrozen_src5 appears to have run properly
[Sat Oct 29 19:13:47 2011] Spatial fit model total counts = 60.178400, observed total counts = 60.000000
[Sat Oct 29 19:13:47 2011] Offset between fit and detection position for source 12 = 0.753618 pixels
[Sat Oct 29 19:13:47 2011] 60.643100 total counts/ 14.682600 bgd. counts: snr = 11.994531
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.753618 pixels
  Position = (543.4, 181.3) = 11 13 34.63 17 33 21.3
  Extent = 1.2 (1.0-1.7)", rotation angle = 0
  Source counts = 46.0 +/- 7.8
  Background counts = 14.7
  Rate = 0.002 +/- 0.0003
[Sat Oct 29 19:13:47 2011] Vigneting correction estimate = 1.000000
[Sat Oct 29 19:13:47 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 29 19:13:47 2011] Assessing source extent using major axis lower bound
[Sat Oct 29 19:13:47 2011] Source does appear to be extended
[Sat Oct 29 19:13:47 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 29 19:14:07 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct 29 19:14:07 2011] Initial guess for spatial extent in simple fitting = 1.23"
[Sat Oct 29 19:14:07 2011] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.001
[Sat Oct 29 19:14:07 2011] Giving source the simple spatial ID 5 for pass 1, mean size = 1.23"
[Sat Oct 29 19:14:08 2011] fullrun_ccd3_acisf02205_pi14-548_cl_pass1_src5.ximg exists
[Sat Oct 29 19:14:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf02205_pi14-548_cl_pass1_src5.csv
[Sat Oct 29 19:14:08 2011] fullrun_ccd3_acisf02205_pi14-548_cl_pass1_src5_1.ximg exists
[Sat Oct 29 19:14:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf02205_pi14-548_cl_pass1_src5.csv
[Sat Oct 29 19:14:08 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf02205_pi14-548_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf02205_pi14-548_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 29 19:14:08 2011] fullrun_ccd3_acisf02205_pi14-548_cl_pass1_tfrozen_src5.ximg exists
[Sat Oct 29 19:14:08 2011] fullrun_ccd3_acisf02205_pi14-548_cl_pass1_tfrozen_src5_1.ximg exists
[Sat Oct 29 19:14:08 2011] Fit fullrun_ccd3_acisf02205_pi14-548_cl_pass1_tfrozen_src5 appears to have run properly
[Sat Oct 29 19:14:15 2011] Spatial fit model total counts = 52.005500, observed total counts = 52.000000
[Sat Oct 29 19:14:15 2011] Offset between fit and detection position for source 12 = 0.112147 pixels
[Sat Oct 29 19:14:15 2011] 51.591630 total counts/ 1.861330 bgd. counts: snr = 36.450995
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.112147 pixels
  Position = (543.4, 181.4) = 11 13 34.63 17 33 21.3
  Extent = 1.3 (1.0-1.6)", rotation angle = 0
  Source counts = 49.7 +/- 7.2
  Background counts = 1.9
  Rate = 0.002 +/- 0.0003
[Sat Oct 29 19:14:15 2011] Vigneting correction estimate = 1.000000
[Sat Oct 29 19:14:15 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 29 19:14:15 2011] Assessing source extent using major axis lower bound
[Sat Oct 29 19:14:15 2011] Source does appear to be extended
[Sat Oct 29 19:14:15 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 29 19:16:41 2011] Not overwriting source region fullrun_ccd3_acisf02205_pi14-548_pass1_cl_src12_src.reg
[Sat Oct 29 19:16:41 2011] Extracting stamp from image fullrun_ccd3_acisf02205_pi14-548_cl_sm2.00.img.gz, (485, 122) - (602, 240)
[Sat Oct 29 19:16:41 2011] Writing fullrun_ccd3_acisf02205_pi14-548_pass1_cl_src12.gif
[Sat Oct 29 19:16:53 2011] ../../acisf02205/products/events/fullrun_ccd3_acisf02205_pi14-548_pass1_cl_src12_src.evt and ../../acisf02205/products/events/fullrun_ccd3_acisf02205_pi14-548_pass1_cl_src12_bgd.evt exist, delete to re-create
[Sat Oct 29 19:16:53 2011] Size of ../../acisf02205/products/events/fullrun_ccd3_acisf02205_pi14-548_pass1_cl_src12_src.evt.gz[events] = 56 counts
[Sat Oct 29 19:16:53 2011] Mean chipx,y = (194.54, 904.09)
[Sat Oct 29 19:16:53 2011] Mean tdetx,y = (4227.91, 3255.54)
[Sat Oct 29 19:16:53 2011] chipx,y range = (172.00-218.00, 885.00-923.00)
[Sat Oct 29 19:16:53 2011] Size of ../../acisf02205/products/events/fullrun_ccd3_acisf02205_pi14-548_pass1_cl_src12_bgd.evt.gz[events] = 26 counts
[Sat Oct 29 19:16:53 2011] ../../acisf02205/products/images/fullrun_ccd3_acisf02205_pi14-548_pass1_cl_src12_src.img and ../../acisf02205/products/images/fullrun_ccd3_acisf02205_pi14-548_pass1_cl_src12_bgd.img exist, delete to re-create
[Sat Oct 29 19:16:53 2011] ../../acisf02205/products/spectra/fullrun_ccd3_acisf02205_pi14-548_pass1_cl_src12_src.pi and ../../acisf02205/products/spectra/fullrun_ccd3_acisf02205_pi14-548_pass1_cl_src12_bgd.pi exist, delete to re-create
[Sat Oct 29 19:16:53 2011] Not generating rmf since there are only 49 counts
[Sat Oct 29 19:16:56 2011] ../../acisf02205/products/lightcurves/fullrun_ccd3_acisf02205_pi14-548_pass1_cl_src12_src.lc and ../../acisf02205/products/lightcurves/fullrun_ccd3_acisf02205_pi14-548_pass1_cl_src12_bgd.lc exist, delete to re-create
[Sat Oct 29 19:16:59 2011] 176.572
[Sat Oct 29 19:17:06 2011] Updating aperture counts using extracted products
[Sat Oct 29 19:17:06 2011] Error reading totcts from fullrun_ccd3_acisf02205_pi14-548_pass1_cl_src12_src.pi.gz
[Sat Oct 29 19:17:06 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 29 19:17:06 2011] Using photon index=1.80, rate=0.00211, arf fullrun_ccd3_acisf02205_pi14-548_pass1_cl_src12.arf
[Sat Oct 29 19:17:06 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct 29 19:17:06 2011] Updating source flux to 2.6e-14
[Sat Oct 29 19:17:18 2011] Source 12 has fewer than 100.000000 counts, skipping spectral fitting