[Sat Oct 29 19:12:45 2011] Detection parameters:
  Position = (594.3, 252.3) = 11 12 44.80 17 29 32.3
  Extent = 2.1" x 1.5", rotation angle = 168 degrees
  Source counts = 117.4 +/- 11.2
  Background counts = 7.6
  Rate = 0.005 +/- 0.0005

[Sat Oct 29 19:12:46 2011] Off-axis axis estimate = 8.04'
[Sat Oct 29 19:13:35 2011] Using EEF radius (= 2.86 ")to estimate initial spatial extent for simple fitting
[Sat Oct 29 19:13:35 2011] Initial guess for spatial extent in simple fitting = 2.86"
[Sat Oct 29 19:13:35 2011] source mask rpix=5.8, npix_max = 159, mask sum = 169, frac = 1.060
[Sat Oct 29 19:13:35 2011] Giving source the simple spatial ID 2 for pass 0, mean size = 2.86"
[Sat Oct 29 19:13:35 2011] fullrun_ccd0_acisf02205_pi14-548_cl_pass0_src2.ximg exists
[Sat Oct 29 19:13:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf02205_pi14-548_cl_pass0_src2.csv
[Sat Oct 29 19:13:35 2011] fullrun_ccd0_acisf02205_pi14-548_cl_pass0_src2_1.ximg exists
[Sat Oct 29 19:13:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf02205_pi14-548_cl_pass0_src2.csv
[Sat Oct 29 19:13:35 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf02205_pi14-548_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf02205_pi14-548_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 29 19:13:36 2011] fullrun_ccd0_acisf02205_pi14-548_cl_pass0_tfrozen_src2.ximg exists
[Sat Oct 29 19:13:36 2011] fullrun_ccd0_acisf02205_pi14-548_cl_pass0_tfrozen_src2_1.ximg exists
[Sat Oct 29 19:13:36 2011] Fit fullrun_ccd0_acisf02205_pi14-548_cl_pass0_tfrozen_src2 appears to have run properly
[Sat Oct 29 19:13:43 2011] Spatial fit model total counts = 127.998000, observed total counts = 128.000000
[Sat Oct 29 19:13:43 2011] Offset between fit and detection position for source 2 = 0.556095 pixels
[Sat Oct 29 19:13:43 2011] 128.364300 total counts/ 16.395300 bgd. counts: snr = 27.652737
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.556095 pixels
  Position = (594.7, 252.7) = 11 12 44.81 17 29 32.3
  Extent = 2.2 (1.8-2.5)", rotation angle = 0
  Source counts = 112.0 +/- 11.3
  Background counts = 16.4
  Rate = 0.005 +/- 0.0005
[Sat Oct 29 19:13:43 2011] Vigneting correction estimate = 1.000000
[Sat Oct 29 19:13:43 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 29 19:13:43 2011] Assessing source extent using major axis lower bound
[Sat Oct 29 19:13:43 2011] Source does appear to be extended
[Sat Oct 29 19:13:43 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 29 19:14:04 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct 29 19:14:04 2011] Initial guess for spatial extent in simple fitting = 2.16"
[Sat Oct 29 19:14:04 2011] source mask rpix=4.4, npix_max = 95, mask sum = 100, frac = 1.048
[Sat Oct 29 19:14:04 2011] Giving source the simple spatial ID 2 for pass 1, mean size = 2.16"
[Sat Oct 29 19:14:04 2011] fullrun_ccd0_acisf02205_pi14-548_cl_pass1_src2.ximg exists
[Sat Oct 29 19:14:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf02205_pi14-548_cl_pass1_src2.csv
[Sat Oct 29 19:14:04 2011] fullrun_ccd0_acisf02205_pi14-548_cl_pass1_src2_1.ximg exists
[Sat Oct 29 19:14:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf02205_pi14-548_cl_pass1_src2.csv
[Sat Oct 29 19:14:04 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf02205_pi14-548_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf02205_pi14-548_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 29 19:14:05 2011] fullrun_ccd0_acisf02205_pi14-548_cl_pass1_tfrozen_src2.ximg exists
[Sat Oct 29 19:14:05 2011] fullrun_ccd0_acisf02205_pi14-548_cl_pass1_tfrozen_src2_1.ximg exists
[Sat Oct 29 19:14:05 2011] Fit fullrun_ccd0_acisf02205_pi14-548_cl_pass1_tfrozen_src2 appears to have run properly
[Sat Oct 29 19:14:12 2011] Spatial fit model total counts = 119.556000, observed total counts = 119.000000
[Sat Oct 29 19:14:12 2011] Offset between fit and detection position for source 2 = 0.341229 pixels
[Sat Oct 29 19:14:12 2011] 119.875300 total counts/ 12.995300 bgd. counts: snr = 29.648539
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.341229 pixels
  Position = (595.0, 252.4) = 11 12 44.80 17 29 32.1
  Extent = 2.0 (1.6-2.4)", rotation angle = 0
  Source counts = 106.9 +/- 10.9
  Background counts = 13.0
  Rate = 0.005 +/- 0.0005
[Sat Oct 29 19:14:12 2011] Vigneting correction estimate = 1.000000
[Sat Oct 29 19:14:12 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 29 19:14:12 2011] Assessing source extent using major axis lower bound
[Sat Oct 29 19:14:12 2011] Source does appear to be extended
[Sat Oct 29 19:14:12 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 29 19:14:30 2011] Not overwriting source region fullrun_ccd0_acisf02205_pi14-548_pass1_cl_src2_src.reg
[Sat Oct 29 19:14:30 2011] Extracting stamp from image fullrun_ccd0_acisf02205_pi14-548_cl_sm2.00.img.gz, (504, 161) - (686, 344)
[Sat Oct 29 19:14:30 2011] Writing fullrun_ccd0_acisf02205_pi14-548_pass1_cl_src2.gif
[Sat Oct 29 19:14:35 2011] ../../acisf02205/products/events/fullrun_ccd0_acisf02205_pi14-548_pass1_cl_src2_src.evt and ../../acisf02205/products/events/fullrun_ccd0_acisf02205_pi14-548_pass1_cl_src2_bgd.evt exist, delete to re-create
[Sat Oct 29 19:14:35 2011] Size of ../../acisf02205/products/events/fullrun_ccd0_acisf02205_pi14-548_pass1_cl_src2_src.evt.gz[events] = 126 counts
[Sat Oct 29 19:14:35 2011] Mean chipx,y = (735.25, 156.79)
[Sat Oct 29 19:14:35 2011] Mean tdetx,y = (3217.79, 4396.75)
[Sat Oct 29 19:14:35 2011] chipx,y range = (710.00-761.00, 131.00-180.00)
[Sat Oct 29 19:14:35 2011] Size of ../../acisf02205/products/events/fullrun_ccd0_acisf02205_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 53 counts
[Sat Oct 29 19:14:35 2011] ../../acisf02205/products/images/fullrun_ccd0_acisf02205_pi14-548_pass1_cl_src2_src.img and ../../acisf02205/products/images/fullrun_ccd0_acisf02205_pi14-548_pass1_cl_src2_bgd.img exist, delete to re-create
[Sat Oct 29 19:14:35 2011] ../../acisf02205/products/spectra/fullrun_ccd0_acisf02205_pi14-548_pass1_cl_src2_src.pi and ../../acisf02205/products/spectra/fullrun_ccd0_acisf02205_pi14-548_pass1_cl_src2_bgd.pi exist, delete to re-create
[Sat Oct 29 19:14:38 2011] ../../acisf02205/products/lightcurves/fullrun_ccd0_acisf02205_pi14-548_pass1_cl_src2_src.lc and ../../acisf02205/products/lightcurves/fullrun_ccd0_acisf02205_pi14-548_pass1_cl_src2_bgd.lc exist, delete to re-create
[Sat Oct 29 19:15:11 2011] Keeping rmf generated by specextract
[Sat Oct 29 19:15:11 2011] 176.659
[Sat Oct 29 19:17:05 2011] Updating aperture counts using extracted products
[Sat Oct 29 19:17:05 2011] Error reading totcts from fullrun_ccd0_acisf02205_pi14-548_pass1_cl_src2_src.pi.gz
[Sat Oct 29 19:17:05 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 29 19:17:05 2011] Using photon index=1.80, rate=0.00453, arf fullrun_ccd0_acisf02205_pi14-548_pass1_cl_src2.arf
[Sat Oct 29 19:17:05 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct 29 19:17:05 2011] Updating source flux to 5.7e-14
[Sat Oct 29 19:17:12 2011] Reading fit data from acisf02205/analysis//spectral/fullrun_ccd0_acisf02205_pi14-548_pass1_cl_src2_pl.csv
[Sat Oct 29 19:17:12 2011] Spectral fit parameter nH value = 4.75557e+20
[Sat Oct 29 19:17:12 2011] Spectral fit parameter PhoIndex value = 2.20164
[Sat Oct 29 19:17:12 2011] Failed to get F(0.3-8.0) from acisf02205/analysis//spectral/fullrun_ccd0_acisf02205_pi14-548_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Sat Oct 29 19:17:12 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 29 19:17:12 2011] Using Nh = 4.8e+20, photon index=2.20, rate=0.00453, arf fullrun_ccd0_acisf02205_pi14-548_pass1_cl_src2.arf
[Sat Oct 29 19:17:12 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct 29 19:17:12 2011] Updating source flux to 5.1e-14