[Sun Oct 30 07:53:05 2011] Detection parameters:
  Position = (552.5, 332.2) = 11 43 42.18 46 17 27.3
  Extent = 0.8" x 0.7", rotation angle = 149 degrees
  Source counts = 25.6 +/- 5.8
  Background counts = 8.4
  Rate = 0.002 +/- 0.0003

[Sun Oct 30 07:53:05 2011] Off-axis axis estimate = 4.58'
[Sun Oct 30 07:53:43 2011] Using EEF radius (= 1.02 ")to estimate initial spatial extent for simple fitting
[Sun Oct 30 07:53:43 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Oct 30 07:53:43 2011] Initial guess for spatial extent in simple fitting = 1.02"
[Sun Oct 30 07:53:43 2011] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.940
[Sun Oct 30 07:53:43 2011] Giving source the simple spatial ID 12 for pass 0, mean size = 1.02"
[Sun Oct 30 07:53:44 2011] fullrun_ccd7_acisf02200_pi14-548_cl_pass0_src12.ximg exists
[Sun Oct 30 07:53:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf02200_pi14-548_cl_pass0_src12.csv
[Sun Oct 30 07:53:44 2011] fullrun_ccd7_acisf02200_pi14-548_cl_pass0_src12_1.ximg exists
[Sun Oct 30 07:53:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf02200_pi14-548_cl_pass0_src12.csv
[Sun Oct 30 07:53:44 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf02200_pi14-548_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf02200_pi14-548_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 30 07:53:44 2011] fullrun_ccd7_acisf02200_pi14-548_cl_pass0_tfrozen_src12.ximg exists
[Sun Oct 30 07:53:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf02200_pi14-548_cl_pass0_tfrozen_src12.csv
[Sun Oct 30 07:53:44 2011] fullrun_ccd7_acisf02200_pi14-548_cl_pass0_tfrozen_src12_1.ximg exists
[Sun Oct 30 07:53:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf02200_pi14-548_cl_pass0_tfrozen_src12.csv
[Sun Oct 30 07:53:44 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf02200_pi14-548_cl_pass0_tfrozen_src12_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf02200_pi14-548_cl_pass0_tfrozen_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 30 07:53:51 2011] Spatial fit model total counts = 4.483420, observed total counts = 6.000000
[Sun Oct 30 07:53:51 2011] Offset between fit and detection position for source 16 = 2.199817 pixels
[Sun Oct 30 07:53:51 2011] 4.005795 total counts/ 0.220455 bgd. counts: snr = 8.062039
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 2.199817 pixels
  Position = (553.9, 333.9) = 11 43 42.13 46 17 27.9
  Extent = 0.8 (0.5-1.6)", rotation angle = 0
  Source counts = 3.8 +/- 2.0
  Background counts = 0.2
  Rate = 0.001 +/- 0.0006
[Sun Oct 30 07:53:51 2011] Vigneting correction estimate = 1.000000
[Sun Oct 30 07:53:51 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 30 07:53:51 2011] Assessing source extent using major axis lower bound
[Sun Oct 30 07:53:51 2011] Source does appear to be extended
[Sun Oct 30 07:53:51 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 30 07:53:51 2011] Deleting source due to low Poisson probability 0.8