[Mon Oct 10 01:46:47 2011] Detection parameters:
  Position = (381.4, 324.2) = 0 34 8.44 -21 29 46.1
  Extent = 1.0" x 0.5", rotation angle = 66 degrees
  Source counts = 41.0 +/- 6.6
  Background counts = 2.0
  Rate = 0.002 +/- 0.0003

[Mon Oct 10 01:46:47 2011] Off-axis axis estimate = 4.22'
[Mon Oct 10 01:47:21 2011] Using EEF radius (= 0.90 ")to estimate initial spatial extent for simple fitting
[Mon Oct 10 01:47:21 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Oct 10 01:47:21 2011] Initial guess for spatial extent in simple fitting = 0.90"
[Mon Oct 10 01:47:21 2011] source mask rpix=1.8, npix_max = 21, mask sum = 25, frac = 1.156
[Mon Oct 10 01:47:21 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 0.90"
[Mon Oct 10 01:47:22 2011] fullrun_ccd7_acisf02192_pi14-548_cl_pass0_src3.ximg exists
[Mon Oct 10 01:47:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf02192_pi14-548_cl_pass0_src3.csv
[Mon Oct 10 01:47:22 2011] fullrun_ccd7_acisf02192_pi14-548_cl_pass0_src3_1.ximg exists
[Mon Oct 10 01:47:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf02192_pi14-548_cl_pass0_src3.csv
[Mon Oct 10 01:47:22 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf02192_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf02192_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 10 01:47:22 2011] fullrun_ccd7_acisf02192_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Mon Oct 10 01:47:22 2011] fullrun_ccd7_acisf02192_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Mon Oct 10 01:47:22 2011] Fit fullrun_ccd7_acisf02192_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Mon Oct 10 01:47:27 2011] Spatial fit model total counts = 44.778500, observed total counts = 45.000000
[Mon Oct 10 01:47:27 2011] Offset between fit and detection position for source 10 = 0.783947 pixels
[Mon Oct 10 01:47:27 2011] 45.123100 total counts/ 10.773700 bgd. counts: snr = 10.464939
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.783947 pixels
  Position = (381.9, 324.8) = 0 34 8.44 -21 29 46.0
  Extent = 0.8 (0.6-1.1)", rotation angle = 0
  Source counts = 34.3 +/- 6.7
  Background counts = 10.8
  Rate = 0.002 +/- 0.0003
[Mon Oct 10 01:47:27 2011] Vigneting correction estimate = 1.000000
[Mon Oct 10 01:47:27 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 10 01:47:27 2011] Assessing source extent using major axis lower bound
[Mon Oct 10 01:47:27 2011] Source does appear to be extended
[Mon Oct 10 01:47:27 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 10 01:47:41 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Oct 10 01:47:41 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Oct 10 01:47:41 2011] Initial guess for spatial extent in simple fitting = 0.82"
[Mon Oct 10 01:47:41 2011] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.846
[Mon Oct 10 01:47:41 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 0.82"
[Mon Oct 10 01:47:42 2011] fullrun_ccd7_acisf02192_pi14-548_cl_pass1_src3.ximg exists
[Mon Oct 10 01:47:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf02192_pi14-548_cl_pass1_src3.csv
[Mon Oct 10 01:47:42 2011] fullrun_ccd7_acisf02192_pi14-548_cl_pass1_src3_1.ximg exists
[Mon Oct 10 01:47:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf02192_pi14-548_cl_pass1_src3.csv
[Mon Oct 10 01:47:42 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf02192_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf02192_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 10 01:47:42 2011] fullrun_ccd7_acisf02192_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Mon Oct 10 01:47:42 2011] fullrun_ccd7_acisf02192_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Mon Oct 10 01:47:42 2011] Fit fullrun_ccd7_acisf02192_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Mon Oct 10 01:47:47 2011] Spatial fit model total counts = 45.039900, observed total counts = 45.000000
[Mon Oct 10 01:47:47 2011] Offset between fit and detection position for source 10 = 0.023021 pixels
[Mon Oct 10 01:47:47 2011] 45.413300 total counts/ 11.772500 bgd. counts: snr = 9.804647
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.023021 pixels
  Position = (381.9, 324.8) = 0 34 8.43 -21 29 46.0
  Extent = 0.8 (0.6-1.1)", rotation angle = 0
  Source counts = 33.6 +/- 6.7
  Background counts = 11.8
  Rate = 0.002 +/- 0.0003
[Mon Oct 10 01:47:47 2011] Vigneting correction estimate = 1.000000
[Mon Oct 10 01:47:47 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 10 01:47:47 2011] Assessing source extent using major axis lower bound
[Mon Oct 10 01:47:47 2011] Source does appear to be extended
[Mon Oct 10 01:47:47 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 10 01:48:40 2011] Not overwriting source region fullrun_ccd7_acisf02192_pi14-548_pass1_cl_src10_src.reg
[Mon Oct 10 01:48:40 2011] Extracting stamp from image fullrun_ccd7_acisf02192_pi14-548_cl_sm2.00.img.gz, (346, 289) - (418, 360)
[Mon Oct 10 01:48:40 2011] Writing fullrun_ccd7_acisf02192_pi14-548_pass1_cl_src10.gif
[Mon Oct 10 01:48:55 2011] ../../acisf02192/products/events/fullrun_ccd7_acisf02192_pi14-548_pass1_cl_src10_src.evt and ../../acisf02192/products/events/fullrun_ccd7_acisf02192_pi14-548_pass1_cl_src10_bgd.evt exist, delete to re-create
[Mon Oct 10 01:48:55 2011] Size of ../../acisf02192/products/events/fullrun_ccd7_acisf02192_pi14-548_pass1_cl_src10_src.evt.gz[events] = 42 counts
[Mon Oct 10 01:48:55 2011] Mean chipx,y = (728.40, 505.17)
[Mon Oct 10 01:48:55 2011] Mean tdetx,y = (4645.40, 2207.17)
[Mon Oct 10 01:48:55 2011] chipx,y range = (711.00-749.00, 487.00-525.00)
[Mon Oct 10 01:48:55 2011] Size of ../../acisf02192/products/events/fullrun_ccd7_acisf02192_pi14-548_pass1_cl_src10_bgd.evt.gz[events] = 20 counts
[Mon Oct 10 01:48:56 2011] ../../acisf02192/products/images/fullrun_ccd7_acisf02192_pi14-548_pass1_cl_src10_src.img and ../../acisf02192/products/images/fullrun_ccd7_acisf02192_pi14-548_pass1_cl_src10_bgd.img exist, delete to re-create
[Mon Oct 10 01:48:56 2011] Not generating rmf since there are only 33 counts
[Mon Oct 10 01:48:56 2011] arf not found, will run specextract
[Mon Oct 10 01:48:57 2011] ../../acisf02192/products/spectra/fullrun_ccd7_acisf02192_pi14-548_pass1_cl_src10_bkg.pi not found
[Mon Oct 10 01:48:57 2011] ../../acisf02192/products/spectra/fullrun_ccd7_acisf02192_pi14-548_pass1_cl_src10.warf not found
[Mon Oct 10 01:48:57 2011] ../../acisf02192/products/spectra/fullrun_ccd7_acisf02192_pi14-548_pass1_cl_src10.wrmf not found
[Mon Oct 10 01:48:57 2011] Removal of ../../acisf02192/products/spectra/fullrun_ccd7_acisf02192_pi14-548_pass1_cl_src10.soff failed
[Mon Oct 10 01:48:57 2011] Failed to rename ../../acisf02192/products/spectra/fullrun_ccd7_acisf02192_pi14-548_pass1_cl_src10_grp.pi to ../../acisf02192/products/spectra/fullrun_ccd7_acisf02192_pi14-548_pass1_cl_src10_src.pi
[Mon Oct 10 01:49:03 2011] ../../acisf02192/products/lightcurves/fullrun_ccd7_acisf02192_pi14-548_pass1_cl_src10_src.lc and ../../acisf02192/products/lightcurves/fullrun_ccd7_acisf02192_pi14-548_pass1_cl_src10_bgd.lc exist, delete to re-create
[Mon Oct 10 01:49:36 2011] No arf file found
[Mon Oct 10 01:49:37 2011] Updating aperture counts using extracted products
[Mon Oct 10 01:49:37 2011] Error reading totcts from fullrun_ccd7_acisf02192_pi14-548_pass1_cl_src10_src.pi
[Mon Oct 10 01:49:37 2011] No arf file for this source, not re-computing flux
[Mon Oct 10 01:49:42 2011] Source 10 has fewer than 100.000000 counts, skipping spectral fitting
[Mon Oct 10 01:49:43 2011] acisf02192/analysis//spectral/fullrun_ccd7_acisf02192_pi14-548_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete