[Thu Oct 20 03:26:41 2011] Detection parameters:
  Position = (1111.8, 672.2) = 12 5 0.13 -0 29 59.8
  Extent = 2.9" x 2.1", rotation angle = 113 degrees
  Source counts = 14.5 +/- 4.1
  Background counts = 2.5
  Rate = 0.002 +/- 0.0007

[Thu Oct 20 03:26:41 2011] Off-axis axis estimate = 9.64'
[Thu Oct 20 03:27:12 2011] Using EEF radius (= 4.11 ")to estimate initial spatial extent for simple fitting
[Thu Oct 20 03:27:12 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Oct 20 03:27:12 2011] Initial guess for spatial extent in simple fitting = 4.11"
[Thu Oct 20 03:27:12 2011] source mask rpix=8.4, npix_max = 313, mask sum = 324, frac = 1.033
[Thu Oct 20 03:27:12 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 4.11"
[Thu Oct 20 03:27:12 2011] fullrun_ccd3_acisf02183_pi14-548_cl_pass0_src1.ximg exists
[Thu Oct 20 03:27:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf02183_pi14-548_cl_pass0_src1.csv
[Thu Oct 20 03:27:12 2011] fullrun_ccd3_acisf02183_pi14-548_cl_pass0_src1_1.ximg exists
[Thu Oct 20 03:27:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf02183_pi14-548_cl_pass0_src1.csv
[Thu Oct 20 03:27:12 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf02183_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf02183_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct 20 03:27:12 2011] fullrun_ccd3_acisf02183_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Thu Oct 20 03:27:12 2011] fullrun_ccd3_acisf02183_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Oct 20 03:27:12 2011] Fit fullrun_ccd3_acisf02183_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Oct 20 03:27:16 2011] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 47.667739 pixels away
[Thu Oct 20 03:27:16 2011] Vigneting correction estimate = 1.000000
[Thu Oct 20 03:27:16 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct 20 03:27:16 2011] Assessing source extent using major
[Thu Oct 20 03:27:16 2011] Source does appear to be extended
[Thu Oct 20 03:27:16 2011] Computing asymmetry using major and minor axis, asym = 1.40
[Thu Oct 20 03:27:28 2011] Using EEF radius (= 4.11 ")to estimate initial spatial extent for simple fitting
[Thu Oct 20 03:27:28 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Oct 20 03:27:28 2011] Initial guess for spatial extent in simple fitting = 4.11"
[Thu Oct 20 03:27:28 2011] source mask rpix=8.4, npix_max = 313, mask sum = 324, frac = 1.033
[Thu Oct 20 03:27:28 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 4.11"
[Thu Oct 20 03:27:28 2011] fullrun_ccd3_acisf02183_pi14-548_cl_pass1_src1.ximg exists
[Thu Oct 20 03:27:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf02183_pi14-548_cl_pass1_src1.csv
[Thu Oct 20 03:27:28 2011] fullrun_ccd3_acisf02183_pi14-548_cl_pass1_src1_1.ximg exists
[Thu Oct 20 03:27:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf02183_pi14-548_cl_pass1_src1.csv
[Thu Oct 20 03:27:28 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf02183_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf02183_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct 20 03:27:28 2011] fullrun_ccd3_acisf02183_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Thu Oct 20 03:27:28 2011] fullrun_ccd3_acisf02183_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Oct 20 03:27:28 2011] Fit fullrun_ccd3_acisf02183_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Oct 20 03:27:31 2011] Spatial fit model total counts = 20.247000, observed total counts = 22.000000
[Thu Oct 20 03:27:31 2011] Offset between fit and detection position for source 1 = 1.611670 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 1.611670 pixels
  Position = (1110.4, 671.4) = 12 5 0.19 -0 30 0.4
  Extent = 4.2 (2.4-5.1)", rotation angle = 0
  Source counts = 20.2 +/- 4.5
  Background counts = 0.0
  Rate = 0.003 +/- 0.0007
[Thu Oct 20 03:27:31 2011] Vigneting correction estimate = 1.000000
[Thu Oct 20 03:27:31 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct 20 03:27:31 2011] Assessing source extent using major axis lower bound
[Thu Oct 20 03:27:31 2011] Source does appear to be extended
[Thu Oct 20 03:27:31 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct 20 03:27:44 2011] Not overwriting source region fullrun_ccd3_acisf02183_pi14-548_pass1_cl_src1_src.reg
[Thu Oct 20 03:27:44 2011] Extracting stamp from image fullrun_ccd3_acisf02183_pi14-548_cl_sm2.00.img.gz, (919, 480) - (1302, 862)
[Thu Oct 20 03:27:44 2011] Writing fullrun_ccd3_acisf02183_pi14-548_pass1_cl_src1.gif
[Thu Oct 20 03:27:45 2011] ../../acisf02183/products/events/fullrun_ccd3_acisf02183_pi14-548_pass1_cl_src1_src.evt and ../../acisf02183/products/events/fullrun_ccd3_acisf02183_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Thu Oct 20 03:27:46 2011] Size of ../../acisf02183/products/events/fullrun_ccd3_acisf02183_pi14-548_pass1_cl_src1_src.evt.gz[events] = 22 counts
[Thu Oct 20 03:27:46 2011] Mean chipx,y = (104.64, 299.95)
[Thu Oct 20 03:27:46 2011] Mean tdetx,y = (4832.05, 3165.64)
[Thu Oct 20 03:27:46 2011] chipx,y range = (84.00-138.00, 273.00-328.00)
[Thu Oct 20 03:27:46 2011] Size of ../../acisf02183/products/events/fullrun_ccd3_acisf02183_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 77 counts
[Thu Oct 20 03:27:46 2011] ../../acisf02183/products/images/fullrun_ccd3_acisf02183_pi14-548_pass1_cl_src1_src.img and ../../acisf02183/products/images/fullrun_ccd3_acisf02183_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Thu Oct 20 03:27:46 2011] ../../acisf02183/products/spectra/fullrun_ccd3_acisf02183_pi14-548_pass1_cl_src1_src.pi and ../../acisf02183/products/spectra/fullrun_ccd3_acisf02183_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Thu Oct 20 03:27:46 2011] Not generating rmf since there are only 20 counts
[Thu Oct 20 03:27:48 2011] ../../acisf02183/products/lightcurves/fullrun_ccd3_acisf02183_pi14-548_pass1_cl_src1_src.lc and ../../acisf02183/products/lightcurves/fullrun_ccd3_acisf02183_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Thu Oct 20 03:27:55 2011] 170.357
[Thu Oct 20 03:28:41 2011] Updating aperture counts using extracted products
[Thu Oct 20 03:28:41 2011] Error reading totcts from fullrun_ccd3_acisf02183_pi14-548_pass1_cl_src1_src.pi.gz
[Thu Oct 20 03:28:41 2011] Calculating source flux in energy range 0.30-8.00
[Thu Oct 20 03:28:41 2011] Using photon index=1.80, rate=0.00322, arf fullrun_ccd3_acisf02183_pi14-548_pass1_cl_src1.arf
[Thu Oct 20 03:28:41 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Oct 20 03:28:41 2011] Updating source flux to 4e-14
[Thu Oct 20 03:28:43 2011] Source 1 has fewer than 100.000000 counts, skipping spectral fitting
[Thu Oct 20 03:28:44 2011] acisf02183/analysis//spectral/fullrun_ccd3_acisf02183_pi14-548_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete