[Tue Sep 27 07:19:29 2011] Detection parameters:
  Position = (734.2, 570.2) = 8 40 52.09 13 18 22.5
  Extent = 1.2" x 0.8", rotation angle = 114 degrees
  Source counts = 54.6 +/- 7.6
  Background counts = 3.4
  Rate = 0.001 +/- 0.0002

[Tue Sep 27 07:19:30 2011] Off-axis axis estimate = 5.50'
[Tue Sep 27 07:20:21 2011] Using EEF radius (= 1.39 ")to estimate initial spatial extent for simple fitting
[Tue Sep 27 07:20:21 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Sep 27 07:20:21 2011] Initial guess for spatial extent in simple fitting = 1.39"
[Tue Sep 27 07:20:21 2011] source mask rpix=2.8, npix_max = 44, mask sum = 36, frac = 0.809
[Tue Sep 27 07:20:21 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 1.39"
[Tue Sep 27 07:20:21 2011] fullrun_ccd6_acisf02130_pi14-548_cl_pass0_src3.ximg exists
[Tue Sep 27 07:20:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf02130_pi14-548_cl_pass0_src3.csv
[Tue Sep 27 07:20:21 2011] fullrun_ccd6_acisf02130_pi14-548_cl_pass0_src3_1.ximg exists
[Tue Sep 27 07:20:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf02130_pi14-548_cl_pass0_src3.csv
[Tue Sep 27 07:20:21 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf02130_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf02130_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep 27 07:20:23 2011] fullrun_ccd6_acisf02130_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Tue Sep 27 07:20:23 2011] fullrun_ccd6_acisf02130_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Tue Sep 27 07:20:23 2011] Fit fullrun_ccd6_acisf02130_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Tue Sep 27 07:20:32 2011] Spatial fit model total counts = 69.927000, observed total counts = 69.000000
[Tue Sep 27 07:20:32 2011] Offset between fit and detection position for source 3 = 0.811076 pixels
[Tue Sep 27 07:20:32 2011] 70.968600 total counts/ 12.419100 bgd. counts: snr = 16.614150
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.811076 pixels
  Position = (733.8, 570.9) = 8 40 52.12 13 18 22.7
  Extent = 1.5 (1.0-2.0)", rotation angle = 0
  Source counts = 58.5 +/- 8.4
  Background counts = 12.4
  Rate = 0.002 +/- 0.0002
[Tue Sep 27 07:20:32 2011] Vigneting correction estimate = 1.000000
[Tue Sep 27 07:20:32 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep 27 07:20:32 2011] Assessing source extent using major axis lower bound
[Tue Sep 27 07:20:32 2011] Source does appear to be extended
[Tue Sep 27 07:20:32 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep 27 07:20:55 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Sep 27 07:20:55 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Sep 27 07:20:55 2011] Initial guess for spatial extent in simple fitting = 1.52"
[Tue Sep 27 07:20:55 2011] source mask rpix=3.1, npix_max = 51, mask sum = 49, frac = 0.955
[Tue Sep 27 07:20:55 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 1.52"
[Tue Sep 27 07:20:56 2011] fullrun_ccd6_acisf02130_pi14-548_cl_pass1_src3.ximg exists
[Tue Sep 27 07:20:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf02130_pi14-548_cl_pass1_src3.csv
[Tue Sep 27 07:20:56 2011] fullrun_ccd6_acisf02130_pi14-548_cl_pass1_src3_1.ximg exists
[Tue Sep 27 07:20:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf02130_pi14-548_cl_pass1_src3.csv
[Tue Sep 27 07:20:56 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf02130_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf02130_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep 27 07:20:56 2011] fullrun_ccd6_acisf02130_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Tue Sep 27 07:20:56 2011] fullrun_ccd6_acisf02130_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Tue Sep 27 07:20:56 2011] Fit fullrun_ccd6_acisf02130_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Tue Sep 27 07:21:08 2011] Spatial fit model total counts = 77.110100, observed total counts = 76.000000
[Tue Sep 27 07:21:08 2011] Offset between fit and detection position for source 3 = 0.407225 pixels
[Tue Sep 27 07:21:08 2011] 78.469600 total counts/ 26.412700 bgd. counts: snr = 10.129124
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.407225 pixels
  Position = (734.2, 570.8) = 8 40 52.11 13 18 22.6
  Extent = 1.4 (1.0-2.0)", rotation angle = 0
  Source counts = 52.1 +/- 8.9
  Background counts = 26.4
  Rate = 0.001 +/- 0.0002
[Tue Sep 27 07:21:08 2011] Vigneting correction estimate = 1.000000
[Tue Sep 27 07:21:08 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep 27 07:21:08 2011] Assessing source extent using major axis lower bound
[Tue Sep 27 07:21:08 2011] Source does appear to be extended
[Tue Sep 27 07:21:08 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep 27 07:22:43 2011] Not overwriting source region fullrun_ccd6_acisf02130_pi14-548_pass1_cl_src3_src.reg
[Tue Sep 27 07:22:43 2011] Extracting stamp from image fullrun_ccd6_acisf02130_pi14-548_cl_sm2.00.img.gz, (670, 507) - (798, 635)
[Tue Sep 27 07:22:43 2011] Writing fullrun_ccd6_acisf02130_pi14-548_pass1_cl_src3.gif
[Tue Sep 27 07:23:08 2011] ../../acisf02130/products/events/fullrun_ccd6_acisf02130_pi14-548_pass1_cl_src3_src.evt and ../../acisf02130/products/events/fullrun_ccd6_acisf02130_pi14-548_pass1_cl_src3_bgd.evt exist, delete to re-create
[Tue Sep 27 07:23:08 2011] Size of ../../acisf02130/products/events/fullrun_ccd6_acisf02130_pi14-548_pass1_cl_src3_src.evt.gz[events] = 78 counts
[Tue Sep 27 07:23:08 2011] Mean chipx,y = (596.76, 437.74)
[Tue Sep 27 07:23:08 2011] Mean tdetx,y = (3471.76, 2139.74)
[Tue Sep 27 07:23:08 2011] chipx,y range = (569.00-616.00, 413.00-458.00)
[Tue Sep 27 07:23:08 2011] Size of ../../acisf02130/products/events/fullrun_ccd6_acisf02130_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 61 counts
[Tue Sep 27 07:23:08 2011] ../../acisf02130/products/images/fullrun_ccd6_acisf02130_pi14-548_pass1_cl_src3_src.img and ../../acisf02130/products/images/fullrun_ccd6_acisf02130_pi14-548_pass1_cl_src3_bgd.img exist, delete to re-create
[Tue Sep 27 07:23:08 2011] ../../acisf02130/products/spectra/fullrun_ccd6_acisf02130_pi14-548_pass1_cl_src3_src.pi and ../../acisf02130/products/spectra/fullrun_ccd6_acisf02130_pi14-548_pass1_cl_src3_bgd.pi exist, delete to re-create
[Tue Sep 27 07:23:08 2011] Not generating rmf since there are only 52 counts
[Tue Sep 27 07:23:14 2011] ../../acisf02130/products/lightcurves/fullrun_ccd6_acisf02130_pi14-548_pass1_cl_src3_src.lc and ../../acisf02130/products/lightcurves/fullrun_ccd6_acisf02130_pi14-548_pass1_cl_src3_bgd.lc exist, delete to re-create
[Tue Sep 27 07:24:16 2011] 175.525
[Tue Sep 27 07:26:22 2011] Updating aperture counts using extracted products
[Tue Sep 27 07:26:22 2011] Error reading totcts from fullrun_ccd6_acisf02130_pi14-548_pass1_cl_src3_src.pi.gz
[Tue Sep 27 07:26:22 2011] Calculating source flux in energy range 0.30-8.00
[Tue Sep 27 07:26:22 2011] Using photon index=1.80, rate=0.0014, arf fullrun_ccd6_acisf02130_pi14-548_pass1_cl_src3.arf
[Tue Sep 27 07:26:22 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Sep 27 07:26:22 2011] Updating source flux to 1.5e-14
[Tue Sep 27 07:26:47 2011] Source 3 has fewer than 100.000000 counts, skipping spectral fitting