[Mon Oct 10 13:39:04 2011] Detection parameters:
  Position = (458.1, 372.6) = 11 41 12.28 65 48 51.8
  Extent = 1.3" x 1.1", rotation angle = 25 degrees
  Source counts = 278.9 +/- 17.4
  Background counts = 24.1
  Rate = 0.006 +/- 0.0004

[Mon Oct 10 13:39:06 2011] Off-axis axis estimate = 6.98'
[Mon Oct 10 13:40:08 2011] Using EEF radius (= 2.17 ")to estimate initial spatial extent for simple fitting
[Mon Oct 10 13:40:08 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Oct 10 13:40:08 2011] Initial guess for spatial extent in simple fitting = 2.17"
[Mon Oct 10 13:40:08 2011] source mask rpix=4.4, npix_max = 96, mask sum = 90, frac = 0.936
[Mon Oct 10 13:40:08 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 2.17"
[Mon Oct 10 13:40:08 2011] fullrun_ccd6_acisf02126_pi14-548_cl_pass0_src1.ximg exists
[Mon Oct 10 13:40:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf02126_pi14-548_cl_pass0_src1.csv
[Mon Oct 10 13:40:08 2011] fullrun_ccd6_acisf02126_pi14-548_cl_pass0_src1_1.ximg exists
[Mon Oct 10 13:40:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf02126_pi14-548_cl_pass0_src1.csv
[Mon Oct 10 13:40:08 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf02126_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf02126_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 10 13:40:09 2011] fullrun_ccd6_acisf02126_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Mon Oct 10 13:40:09 2011] fullrun_ccd6_acisf02126_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Oct 10 13:40:09 2011] Fit fullrun_ccd6_acisf02126_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Oct 10 13:40:22 2011] Spatial fit model total counts = 336.056000, observed total counts = 336.000000
[Mon Oct 10 13:40:22 2011] Offset between fit and detection position for source 1 = 1.512888 pixels
[Mon Oct 10 13:40:22 2011] 335.706800 total counts/ 11.345800 bgd. counts: snr = 96.296626
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 1.512888 pixels
  Position = (458.4, 374.0) = 11 41 12.29 65 48 52.3
  Extent = 2.9 (2.6-3.1)", rotation angle = 0
  Source counts = 324.4 +/- 18.3
  Background counts = 11.3
  Rate = 0.007 +/- 0.0004
[Mon Oct 10 13:40:22 2011] Vigneting correction estimate = 1.000000
[Mon Oct 10 13:40:22 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 10 13:40:22 2011] Assessing source extent using major axis lower bound
[Mon Oct 10 13:40:22 2011] Source does appear to be extended
[Mon Oct 10 13:40:22 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 10 13:40:50 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Oct 10 13:40:50 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Oct 10 13:40:50 2011] Initial guess for spatial extent in simple fitting = 2.87"
[Mon Oct 10 13:40:50 2011] source mask rpix=5.8, npix_max = 160, mask sum = 154, frac = 0.959
[Mon Oct 10 13:40:50 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 2.87"
[Mon Oct 10 13:40:51 2011] fullrun_ccd6_acisf02126_pi14-548_cl_pass1_src1.ximg exists
[Mon Oct 10 13:40:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf02126_pi14-548_cl_pass1_src1.csv
[Mon Oct 10 13:40:51 2011] fullrun_ccd6_acisf02126_pi14-548_cl_pass1_src1_1.ximg exists
[Mon Oct 10 13:40:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf02126_pi14-548_cl_pass1_src1.csv
[Mon Oct 10 13:40:51 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf02126_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf02126_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 10 13:40:51 2011] fullrun_ccd6_acisf02126_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Mon Oct 10 13:40:51 2011] fullrun_ccd6_acisf02126_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Oct 10 13:40:51 2011] Fit fullrun_ccd6_acisf02126_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Oct 10 13:41:02 2011] Spatial fit model total counts = 358.364000, observed total counts = 354.000000
[Mon Oct 10 13:41:02 2011] Offset between fit and detection position for source 1 = 0.095208 pixels
[Mon Oct 10 13:41:02 2011] 358.457800 total counts/ 37.337800 bgd. counts: snr = 52.552453
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.095208 pixels
  Position = (458.4, 373.9) = 11 41 12.30 65 48 52.2
  Extent = 2.8 (2.6-3.0)", rotation angle = 0
  Source counts = 321.1 +/- 18.9
  Background counts = 37.3
  Rate = 0.007 +/- 0.0004
[Mon Oct 10 13:41:02 2011] Vigneting correction estimate = 1.000000
[Mon Oct 10 13:41:02 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 10 13:41:02 2011] Assessing source extent using major axis lower bound
[Mon Oct 10 13:41:02 2011] Source does appear to be extended
[Mon Oct 10 13:41:02 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 10 13:42:27 2011] Not overwriting source region fullrun_ccd6_acisf02126_pi14-548_pass1_cl_src1_src.reg
[Mon Oct 10 13:42:27 2011] Extracting stamp from image fullrun_ccd6_acisf02126_pi14-548_cl_sm2.00.img.gz, (330, 246) - (586, 502)
[Mon Oct 10 13:42:27 2011] Writing fullrun_ccd6_acisf02126_pi14-548_pass1_cl_src1.gif
[Mon Oct 10 13:42:34 2011] ../../acisf02126/products/events/fullrun_ccd6_acisf02126_pi14-548_pass1_cl_src1_src.evt and ../../acisf02126/products/events/fullrun_ccd6_acisf02126_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Mon Oct 10 13:42:34 2011] Size of ../../acisf02126/products/events/fullrun_ccd6_acisf02126_pi14-548_pass1_cl_src1_src.evt.gz[events] = 346 counts
[Mon Oct 10 13:42:34 2011] Mean chipx,y = (520.79, 945.13)
[Mon Oct 10 13:42:34 2011] Mean tdetx,y = (3395.79, 2647.13)
[Mon Oct 10 13:42:34 2011] chipx,y range = (493.00-558.00, 910.00-977.00)
[Mon Oct 10 13:42:34 2011] Size of ../../acisf02126/products/events/fullrun_ccd6_acisf02126_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 224 counts
[Mon Oct 10 13:42:34 2011] ../../acisf02126/products/images/fullrun_ccd6_acisf02126_pi14-548_pass1_cl_src1_src.img and ../../acisf02126/products/images/fullrun_ccd6_acisf02126_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Mon Oct 10 13:42:34 2011] ../../acisf02126/products/spectra/fullrun_ccd6_acisf02126_pi14-548_pass1_cl_src1_src.pi and ../../acisf02126/products/spectra/fullrun_ccd6_acisf02126_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Mon Oct 10 13:42:36 2011] ../../acisf02126/products/lightcurves/fullrun_ccd6_acisf02126_pi14-548_pass1_cl_src1_src.lc and ../../acisf02126/products/lightcurves/fullrun_ccd6_acisf02126_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Mon Oct 10 13:43:47 2011] Keeping rmf generated by specextract
[Mon Oct 10 13:43:47 2011] 175.098
[Mon Oct 10 13:44:55 2011] Updating aperture counts using extracted products
[Mon Oct 10 13:44:55 2011] Error reading totcts from fullrun_ccd6_acisf02126_pi14-548_pass1_cl_src1_src.pi.gz
[Mon Oct 10 13:44:55 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 10 13:44:55 2011] Using photon index=1.80, rate=0.00653, arf fullrun_ccd6_acisf02126_pi14-548_pass1_cl_src1.arf
[Mon Oct 10 13:44:55 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 10 13:44:55 2011] Updating source flux to 7.5e-14
[Mon Oct 10 13:45:16 2011] Reading fit data from acisf02126/analysis//spectral/fullrun_ccd6_acisf02126_pi14-548_pass1_cl_src1_pl.csv
[Mon Oct 10 13:45:16 2011] Spectral fit parameter nH value = 5.50209e+20
[Mon Oct 10 13:45:16 2011] Spectral fit parameter PhoIndex value = 1.82502
[Mon Oct 10 13:45:16 2011] Failed to get F(0.3-8.0) from acisf02126/analysis//spectral/fullrun_ccd6_acisf02126_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Mon Oct 10 13:45:16 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 10 13:45:16 2011] Using Nh = 5.5e+20, photon index=1.83, rate=0.00653, arf fullrun_ccd6_acisf02126_pi14-548_pass1_cl_src1.arf
[Mon Oct 10 13:45:16 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 10 13:45:16 2011] Updating source flux to 7.3e-14