[Mon Oct 10 13:39:03 2011] Detection parameters:
  Position = (134.8, 666.7) = 11 41 26.45 65 36 22.1
  Extent = 6.1" x 5.6", rotation angle = 52 degrees
  Source counts = 926.5 +/- 38.3
  Background counts = 540.5
  Rate = 0.02 +/- 0.0008

[Mon Oct 10 13:39:03 2011] Off-axis axis estimate = 14.35'
[Mon Oct 10 13:40:05 2011] Using EEF radius (= 9.29 ")to estimate initial spatial extent for simple fitting
[Mon Oct 10 13:40:05 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Oct 10 13:40:05 2011] Initial guess for spatial extent in simple fitting = 9.29"
[Mon Oct 10 13:40:05 2011] source mask rpix=18.9, npix_max = 1502, mask sum = 1521, frac = 1.012
[Mon Oct 10 13:40:05 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 9.29"
[Mon Oct 10 13:40:05 2011] fullrun_ccd3_acisf02126_pi14-548_cl_pass0_src1.ximg exists
[Mon Oct 10 13:40:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf02126_pi14-548_cl_pass0_src1.csv
[Mon Oct 10 13:40:05 2011] fullrun_ccd3_acisf02126_pi14-548_cl_pass0_src1_1.ximg exists
[Mon Oct 10 13:40:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf02126_pi14-548_cl_pass0_src1.csv
[Mon Oct 10 13:40:05 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf02126_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf02126_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 10 13:40:05 2011] fullrun_ccd3_acisf02126_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Mon Oct 10 13:40:05 2011] fullrun_ccd3_acisf02126_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Oct 10 13:40:05 2011] Fit fullrun_ccd3_acisf02126_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Oct 10 13:40:17 2011] Spatial fit model total counts = 1696.130000, observed total counts = 1694.000000
[Mon Oct 10 13:40:17 2011] Offset between fit and detection position for source 1 = 0.742241 pixels
[Mon Oct 10 13:40:17 2011] 1696.060000 total counts/ 192.860000 bgd. counts: snr = 108.241970
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.742241 pixels
  Position = (134.6, 667.5) = 11 41 26.51 65 36 22.2
  Extent = 10.3 (9.8-10.7)", rotation angle = 0
  Source counts = 1503.2 +/- 41.2
  Background counts = 192.9
  Rate = 0.03 +/- 0.0008
[Mon Oct 10 13:40:17 2011] Vigneting correction estimate = 1.000000
[Mon Oct 10 13:40:17 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 10 13:40:17 2011] Assessing source extent using major axis lower bound
[Mon Oct 10 13:40:17 2011] Source does appear to be extended
[Mon Oct 10 13:40:17 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 10 13:40:49 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Oct 10 13:40:49 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Oct 10 13:40:49 2011] Initial guess for spatial extent in simple fitting = 10.28"
[Mon Oct 10 13:40:49 2011] source mask rpix=20.9, npix_max = 1829, mask sum = 1849, frac = 1.010
[Mon Oct 10 13:40:49 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 10.28"
[Mon Oct 10 13:40:49 2011] fullrun_ccd3_acisf02126_pi14-548_cl_pass1_src1.ximg exists
[Mon Oct 10 13:40:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf02126_pi14-548_cl_pass1_src1.csv
[Mon Oct 10 13:40:49 2011] fullrun_ccd3_acisf02126_pi14-548_cl_pass1_src1_1.ximg exists
[Mon Oct 10 13:40:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf02126_pi14-548_cl_pass1_src1.csv
[Mon Oct 10 13:40:49 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf02126_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf02126_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 10 13:40:49 2011] fullrun_ccd3_acisf02126_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Mon Oct 10 13:40:49 2011] fullrun_ccd3_acisf02126_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Oct 10 13:40:49 2011] Fit fullrun_ccd3_acisf02126_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Oct 10 13:41:00 2011] Spatial fit model total counts = 1766.850000, observed total counts = 1751.000000
[Mon Oct 10 13:41:00 2011] Offset between fit and detection position for source 1 = 0.082247 pixels
[Mon Oct 10 13:41:00 2011] 1766.780000 total counts/ 285.980000 bgd. counts: snr = 87.564601
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.082247 pixels
  Position = (134.6, 667.4) = 11 41 26.51 65 36 22.2
  Extent = 10.1 (9.7-10.5)", rotation angle = 0
  Source counts = 1480.8 +/- 42.0
  Background counts = 286.0
  Rate = 0.03 +/- 0.0009
[Mon Oct 10 13:41:00 2011] Vigneting correction estimate = 1.000000
[Mon Oct 10 13:41:00 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 10 13:41:00 2011] Assessing source extent using major axis lower bound
[Mon Oct 10 13:41:00 2011] Source does appear to be extended
[Mon Oct 10 13:41:00 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 10 13:41:39 2011] Not overwriting source region fullrun_ccd3_acisf02126_pi14-548_pass1_cl_src1_src.reg
[Mon Oct 10 13:41:39 2011] Extracting stamp from image fullrun_ccd3_acisf02126_pi14-548_cl_sm2.00.img.gz, (0, 204) - (598, 1130)
[Mon Oct 10 13:41:39 2011] Writing fullrun_ccd3_acisf02126_pi14-548_pass1_cl_src1.gif
[Mon Oct 10 13:41:40 2011] ../../acisf02126/products/events/fullrun_ccd3_acisf02126_pi14-548_pass1_cl_src1_src.evt and ../../acisf02126/products/events/fullrun_ccd3_acisf02126_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Mon Oct 10 13:41:40 2011] Size of ../../acisf02126/products/events/fullrun_ccd3_acisf02126_pi14-548_pass1_cl_src1_src.evt.gz[events] = 1691 counts
[Mon Oct 10 13:41:40 2011] Mean chipx,y = (910.24, 959.61)
[Mon Oct 10 13:41:40 2011] Mean tdetx,y = (4172.39, 3971.24)
[Mon Oct 10 13:41:40 2011] chipx,y range = (824.00-1006.00, 878.00-1023.00)
[Mon Oct 10 13:41:40 2011] Size of ../../acisf02126/products/events/fullrun_ccd3_acisf02126_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 1145 counts
[Mon Oct 10 13:41:40 2011] ../../acisf02126/products/images/fullrun_ccd3_acisf02126_pi14-548_pass1_cl_src1_src.img and ../../acisf02126/products/images/fullrun_ccd3_acisf02126_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Mon Oct 10 13:41:40 2011] ../../acisf02126/products/spectra/fullrun_ccd3_acisf02126_pi14-548_pass1_cl_src1_src.pi and ../../acisf02126/products/spectra/fullrun_ccd3_acisf02126_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Mon Oct 10 13:41:47 2011] ../../acisf02126/products/lightcurves/fullrun_ccd3_acisf02126_pi14-548_pass1_cl_src1_src.lc and ../../acisf02126/products/lightcurves/fullrun_ccd3_acisf02126_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Mon Oct 10 13:42:16 2011] Keeping rmf generated by specextract
[Mon Oct 10 13:42:16 2011] 147.802
[Mon Oct 10 13:44:54 2011] Updating aperture counts using extracted products
[Mon Oct 10 13:44:54 2011] Error reading totcts from fullrun_ccd3_acisf02126_pi14-548_pass1_cl_src1_src.pi.gz
[Mon Oct 10 13:44:55 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 10 13:44:55 2011] Using photon index=1.80, rate=0.0301, arf fullrun_ccd3_acisf02126_pi14-548_pass1_cl_src1.arf
[Mon Oct 10 13:44:55 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 10 13:44:55 2011] Updating source flux to 3.9e-13
[Mon Oct 10 13:45:08 2011] Reading fit data from acisf02126/analysis//spectral/fullrun_ccd3_acisf02126_pi14-548_pass1_cl_src1_pl.csv
[Mon Oct 10 13:45:08 2011] Spectral fit parameter nH value = 8.88886e+19
[Mon Oct 10 13:45:08 2011] Spectral fit parameter PhoIndex value = 1.73595
[Mon Oct 10 13:45:08 2011] Failed to get F(0.3-8.0) from acisf02126/analysis//spectral/fullrun_ccd3_acisf02126_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Mon Oct 10 13:45:08 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 10 13:45:08 2011] Using Nh = 8.9e+19, photon index=1.74, rate=0.0301, arf fullrun_ccd3_acisf02126_pi14-548_pass1_cl_src1.arf
[Mon Oct 10 13:45:08 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 10 13:45:08 2011] Updating source flux to 4e-13