[Fri Oct 28 13:17:01 2011] Detection parameters:
  Position = (660.9, 621.4) = 11 13 16.38 -26 45 6.5
  Extent = 0.9" x 0.5", rotation angle = 49 degrees
  Source counts = 14.4 +/- 4.4
  Background counts = 4.6
  Rate = 0.0004 +/- 0.0001

[Fri Oct 28 13:17:04 2011] Off-axis axis estimate = 2.20'
[Fri Oct 28 13:17:50 2011] Using EEF radius (= 0.45 ")to estimate initial spatial extent for simple fitting
[Fri Oct 28 13:17:50 2011] Initial guess for spatial extent in simple fitting = 0.45"
[Fri Oct 28 13:17:50 2011] source mask rpix=0.9, npix_max = 8, mask sum = 9, frac = 1.119
[Fri Oct 28 13:17:50 2011] Giving source the simple spatial ID 28 for pass 0, mean size = 0.45"
[Fri Oct 28 13:17:54 2011] fullrun_ccd7_acisf02078_pi14-548_cl_pass0_src28.ximg exists
[Fri Oct 28 13:17:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf02078_pi14-548_cl_pass0_src28.csv
[Fri Oct 28 13:17:54 2011] fullrun_ccd7_acisf02078_pi14-548_cl_pass0_src28_1.ximg exists
[Fri Oct 28 13:17:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf02078_pi14-548_cl_pass0_src28.csv
[Fri Oct 28 13:17:54 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf02078_pi14-548_cl_pass0_src28_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf02078_pi14-548_cl_pass0_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 28 13:17:54 2011] fullrun_ccd7_acisf02078_pi14-548_cl_pass0_tfrozen_src28.ximg exists
[Fri Oct 28 13:17:54 2011] fullrun_ccd7_acisf02078_pi14-548_cl_pass0_tfrozen_src28_1.ximg exists
[Fri Oct 28 13:17:54 2011] Fit fullrun_ccd7_acisf02078_pi14-548_cl_pass0_tfrozen_src28 appears to have run properly
[Fri Oct 28 13:18:06 2011] Spatial fit model total counts = 22.110900, observed total counts = 23.000000
[Fri Oct 28 13:18:06 2011] Offset between fit and detection position for source 26 = 0.669882 pixels
[Fri Oct 28 13:18:06 2011] 21.962420 total counts/ 5.037720 bgd. counts: snr = 7.540566
Spatial fit parameters:
  Offset between fit and detection position for source 26 = 0.669882 pixels
  Position = (661.2, 622.0) = 11 13 16.38 -26 45 6.5
  Extent = 0.9 (0.5-1.4)", rotation angle = 0
  Source counts = 16.9 +/- 4.7
  Background counts = 5.0
  Rate = 0.0005 +/- 0.0001
[Fri Oct 28 13:18:06 2011] Vigneting correction estimate = 1.000000
[Fri Oct 28 13:18:06 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 28 13:18:06 2011] Assessing source extent using major axis lower bound
[Fri Oct 28 13:18:06 2011] Source does appear to be extended
[Fri Oct 28 13:18:06 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 28 13:18:23 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct 28 13:18:23 2011] Initial guess for spatial extent in simple fitting = 0.95"
[Fri Oct 28 13:18:23 2011] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.846
[Fri Oct 28 13:18:23 2011] Giving source the simple spatial ID 28 for pass 1, mean size = 0.95"
[Fri Oct 28 13:18:24 2011] fullrun_ccd7_acisf02078_pi14-548_cl_pass1_src28.ximg exists
[Fri Oct 28 13:18:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf02078_pi14-548_cl_pass1_src28.csv
[Fri Oct 28 13:18:24 2011] fullrun_ccd7_acisf02078_pi14-548_cl_pass1_src28_1.ximg exists
[Fri Oct 28 13:18:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf02078_pi14-548_cl_pass1_src28.csv
[Fri Oct 28 13:18:24 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf02078_pi14-548_cl_pass1_src28_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf02078_pi14-548_cl_pass1_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 28 13:18:25 2011] fullrun_ccd7_acisf02078_pi14-548_cl_pass1_tfrozen_src28.ximg exists
[Fri Oct 28 13:18:25 2011] fullrun_ccd7_acisf02078_pi14-548_cl_pass1_tfrozen_src28_1.ximg exists
[Fri Oct 28 13:18:25 2011] Fit fullrun_ccd7_acisf02078_pi14-548_cl_pass1_tfrozen_src28 appears to have run properly
[Fri Oct 28 13:18:35 2011] Spatial fit model total counts = 20.909100, observed total counts = 22.000000
[Fri Oct 28 13:18:35 2011] Offset between fit and detection position for source 26 = 0.063088 pixels
[Fri Oct 28 13:18:35 2011] 20.705070 total counts/ 3.657670 bgd. counts: snr = 8.913656
Spatial fit parameters:
  Offset between fit and detection position for source 26 = 0.063088 pixels
  Position = (661.2, 621.9) = 11 13 16.39 -26 45 6.5
  Extent = 1.0 (0.5-1.2)", rotation angle = 0
  Source counts = 17.0 +/- 4.6
  Background counts = 3.7
  Rate = 0.0005 +/- 0.0001
[Fri Oct 28 13:18:35 2011] Vigneting correction estimate = 1.000000
[Fri Oct 28 13:18:35 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 28 13:18:35 2011] Assessing source extent using major axis lower bound
[Fri Oct 28 13:18:35 2011] Source does appear to be extended
[Fri Oct 28 13:18:35 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 28 13:20:03 2011] Not overwriting source region fullrun_ccd7_acisf02078_pi14-548_pass1_cl_src26_src.reg
[Fri Oct 28 13:20:03 2011] Extracting stamp from image fullrun_ccd7_acisf02078_pi14-548_cl_sm2.00.img.gz, (617, 578) - (705, 666)
[Fri Oct 28 13:20:03 2011] Writing fullrun_ccd7_acisf02078_pi14-548_pass1_cl_src26.gif
[Fri Oct 28 13:21:27 2011] ../../acisf02078/products/events/fullrun_ccd7_acisf02078_pi14-548_pass1_cl_src26_src.evt and ../../acisf02078/products/events/fullrun_ccd7_acisf02078_pi14-548_pass1_cl_src26_bgd.evt exist, delete to re-create
[Fri Oct 28 13:21:27 2011] Size of ../../acisf02078/products/events/fullrun_ccd7_acisf02078_pi14-548_pass1_cl_src26_src.evt.gz[events] = 21 counts
[Fri Oct 28 13:21:27 2011] Mean chipx,y = (475.19, 528.33)
[Fri Oct 28 13:21:27 2011] Mean tdetx,y = (4392.19, 2230.33)
[Fri Oct 28 13:21:27 2011] chipx,y range = (464.00-493.00, 508.00-543.00)
[Fri Oct 28 13:21:27 2011] Size of ../../acisf02078/products/events/fullrun_ccd7_acisf02078_pi14-548_pass1_cl_src26_bgd.evt.gz[events] = 106 counts
[Fri Oct 28 13:21:27 2011] ../../acisf02078/products/images/fullrun_ccd7_acisf02078_pi14-548_pass1_cl_src26_src.img and ../../acisf02078/products/images/fullrun_ccd7_acisf02078_pi14-548_pass1_cl_src26_bgd.img exist, delete to re-create
[Fri Oct 28 13:21:27 2011] ../../acisf02078/products/spectra/fullrun_ccd7_acisf02078_pi14-548_pass1_cl_src26_src.pi and ../../acisf02078/products/spectra/fullrun_ccd7_acisf02078_pi14-548_pass1_cl_src26_bgd.pi exist, delete to re-create
[Fri Oct 28 13:21:27 2011] Not generating rmf since there are only 17 counts
[Fri Oct 28 13:21:29 2011] ../../acisf02078/products/lightcurves/fullrun_ccd7_acisf02078_pi14-548_pass1_cl_src26_src.lc and ../../acisf02078/products/lightcurves/fullrun_ccd7_acisf02078_pi14-548_pass1_cl_src26_bgd.lc exist, delete to re-create
[Fri Oct 28 13:23:11 2011] 236.054
[Fri Oct 28 13:23:16 2011] Updating aperture counts using extracted products
[Fri Oct 28 13:23:16 2011] Error reading totcts from fullrun_ccd7_acisf02078_pi14-548_pass1_cl_src26_src.pi.gz
[Fri Oct 28 13:23:16 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 28 13:23:16 2011] Using photon index=1.80, rate=0.000483, arf fullrun_ccd7_acisf02078_pi14-548_pass1_cl_src26.arf
[Fri Oct 28 13:23:16 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 28 13:23:16 2011] Updating source flux to 3.1e-15
[Fri Oct 28 13:23:29 2011] Source 26 has fewer than 100.000000 counts, skipping spectral fitting