[Fri Oct 28 13:17:01 2011] Detection parameters:
  Position = (867.8, 748.9) = 11 13 8.78 -26 44 3.8
  Extent = 0.9" x 0.5", rotation angle = 36 degrees
  Source counts = 37.5 +/- 6.3
  Background counts = 2.5
  Rate = 0.001 +/- 0.0002

[Fri Oct 28 13:17:04 2011] Off-axis axis estimate = 3.34'
[Fri Oct 28 13:17:50 2011] Using EEF radius (= 0.65 ")to estimate initial spatial extent for simple fitting
[Fri Oct 28 13:17:50 2011] Initial guess for spatial extent in simple fitting = 0.65"
[Fri Oct 28 13:17:50 2011] source mask rpix=1.3, npix_max = 13, mask sum = 16, frac = 1.197
[Fri Oct 28 13:17:50 2011] Giving source the simple spatial ID 13 for pass 0, mean size = 0.65"
[Fri Oct 28 13:17:53 2011] fullrun_ccd7_acisf02078_pi14-548_cl_pass0_src13.ximg exists
[Fri Oct 28 13:17:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf02078_pi14-548_cl_pass0_src13.csv
[Fri Oct 28 13:17:53 2011] fullrun_ccd7_acisf02078_pi14-548_cl_pass0_src13_1.ximg exists
[Fri Oct 28 13:17:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf02078_pi14-548_cl_pass0_src13.csv
[Fri Oct 28 13:17:53 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf02078_pi14-548_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf02078_pi14-548_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 28 13:17:54 2011] fullrun_ccd7_acisf02078_pi14-548_cl_pass0_tfrozen_src13.ximg exists
[Fri Oct 28 13:17:54 2011] fullrun_ccd7_acisf02078_pi14-548_cl_pass0_tfrozen_src13_1.ximg exists
[Fri Oct 28 13:17:54 2011] Fit fullrun_ccd7_acisf02078_pi14-548_cl_pass0_tfrozen_src13 appears to have run properly
[Fri Oct 28 13:18:06 2011] Spatial fit model total counts = 41.993000, observed total counts = 42.000000
[Fri Oct 28 13:18:06 2011] Offset between fit and detection position for source 24 = 0.461876 pixels
[Fri Oct 28 13:18:06 2011] 42.271680 total counts/ 8.276980 bgd. counts: snr = 11.816130
Spatial fit parameters:
  Offset between fit and detection position for source 24 = 0.461876 pixels
  Position = (868.2, 749.1) = 11 13 8.78 -26 44 3.9
  Extent = 0.7 (0.6-1.0)", rotation angle = 0
  Source counts = 34.0 +/- 6.5
  Background counts = 8.3
  Rate = 0.001 +/- 0.0002
[Fri Oct 28 13:18:06 2011] Vigneting correction estimate = 1.000000
[Fri Oct 28 13:18:06 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 28 13:18:06 2011] Assessing source extent using major axis lower bound
[Fri Oct 28 13:18:06 2011] Source does appear to be extended
[Fri Oct 28 13:18:06 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 28 13:18:23 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct 28 13:18:23 2011] Initial guess for spatial extent in simple fitting = 0.74"
[Fri Oct 28 13:18:23 2011] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.990
[Fri Oct 28 13:18:23 2011] Giving source the simple spatial ID 13 for pass 1, mean size = 0.74"
[Fri Oct 28 13:18:24 2011] fullrun_ccd7_acisf02078_pi14-548_cl_pass1_src13.ximg exists
[Fri Oct 28 13:18:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf02078_pi14-548_cl_pass1_src13.csv
[Fri Oct 28 13:18:24 2011] fullrun_ccd7_acisf02078_pi14-548_cl_pass1_src13_1.ximg exists
[Fri Oct 28 13:18:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf02078_pi14-548_cl_pass1_src13.csv
[Fri Oct 28 13:18:24 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf02078_pi14-548_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf02078_pi14-548_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 28 13:18:25 2011] fullrun_ccd7_acisf02078_pi14-548_cl_pass1_tfrozen_src13.ximg exists
[Fri Oct 28 13:18:25 2011] fullrun_ccd7_acisf02078_pi14-548_cl_pass1_tfrozen_src13_1.ximg exists
[Fri Oct 28 13:18:25 2011] Fit fullrun_ccd7_acisf02078_pi14-548_cl_pass1_tfrozen_src13 appears to have run properly
[Fri Oct 28 13:18:35 2011] Spatial fit model total counts = 39.202700, observed total counts = 40.000000
[Fri Oct 28 13:18:35 2011] Offset between fit and detection position for source 24 = 0.184442 pixels
[Fri Oct 28 13:18:35 2011] 39.368000 total counts/ 1.552400 bgd. counts: snr = 30.350733
Spatial fit parameters:
  Offset between fit and detection position for source 24 = 0.184442 pixels
  Position = (868.4, 749.2) = 11 13 8.78 -26 44 3.9
  Extent = 0.9 (0.6-1.1)", rotation angle = 0
  Source counts = 37.8 +/- 6.3
  Background counts = 1.6
  Rate = 0.001 +/- 0.0002
[Fri Oct 28 13:18:35 2011] Vigneting correction estimate = 1.000000
[Fri Oct 28 13:18:35 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 28 13:18:35 2011] Assessing source extent using major axis lower bound
[Fri Oct 28 13:18:35 2011] Source does appear to be extended
[Fri Oct 28 13:18:35 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 28 13:20:03 2011] Not overwriting source region fullrun_ccd7_acisf02078_pi14-548_pass1_cl_src24_src.reg
[Fri Oct 28 13:20:03 2011] Extracting stamp from image fullrun_ccd7_acisf02078_pi14-548_cl_sm2.00.img.gz, (828, 709) - (909, 790)
[Fri Oct 28 13:20:03 2011] Writing fullrun_ccd7_acisf02078_pi14-548_pass1_cl_src24.gif
[Fri Oct 28 13:20:42 2011] ../../acisf02078/products/events/fullrun_ccd7_acisf02078_pi14-548_pass1_cl_src24_src.evt and ../../acisf02078/products/events/fullrun_ccd7_acisf02078_pi14-548_pass1_cl_src24_bgd.evt exist, delete to re-create
[Fri Oct 28 13:20:42 2011] Size of ../../acisf02078/products/events/fullrun_ccd7_acisf02078_pi14-548_pass1_cl_src24_src.evt.gz[events] = 40 counts
[Fri Oct 28 13:20:42 2011] Mean chipx,y = (543.02, 759.85)
[Fri Oct 28 13:20:42 2011] Mean tdetx,y = (4460.02, 2461.85)
[Fri Oct 28 13:20:42 2011] chipx,y range = (524.00-559.00, 742.00-782.00)
[Fri Oct 28 13:20:42 2011] Size of ../../acisf02078/products/events/fullrun_ccd7_acisf02078_pi14-548_pass1_cl_src24_bgd.evt.gz[events] = 40 counts
[Fri Oct 28 13:20:42 2011] ../../acisf02078/products/images/fullrun_ccd7_acisf02078_pi14-548_pass1_cl_src24_src.img and ../../acisf02078/products/images/fullrun_ccd7_acisf02078_pi14-548_pass1_cl_src24_bgd.img exist, delete to re-create
[Fri Oct 28 13:20:42 2011] ../../acisf02078/products/spectra/fullrun_ccd7_acisf02078_pi14-548_pass1_cl_src24_src.pi and ../../acisf02078/products/spectra/fullrun_ccd7_acisf02078_pi14-548_pass1_cl_src24_bgd.pi exist, delete to re-create
[Fri Oct 28 13:20:42 2011] Not generating rmf since there are only 37 counts
[Fri Oct 28 13:20:45 2011] ../../acisf02078/products/lightcurves/fullrun_ccd7_acisf02078_pi14-548_pass1_cl_src24_src.lc and ../../acisf02078/products/lightcurves/fullrun_ccd7_acisf02078_pi14-548_pass1_cl_src24_bgd.lc exist, delete to re-create
[Fri Oct 28 13:23:11 2011] 230.617
[Fri Oct 28 13:23:15 2011] Updating aperture counts using extracted products
[Fri Oct 28 13:23:15 2011] Error reading totcts from fullrun_ccd7_acisf02078_pi14-548_pass1_cl_src24_src.pi.gz
[Fri Oct 28 13:23:16 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 28 13:23:16 2011] Using photon index=1.80, rate=0.00107, arf fullrun_ccd7_acisf02078_pi14-548_pass1_cl_src24.arf
[Fri Oct 28 13:23:16 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 28 13:23:16 2011] Updating source flux to 7e-15
[Fri Oct 28 13:23:29 2011] Source 24 has fewer than 100.000000 counts, skipping spectral fitting