[Fri Oct  7 01:08:26 2011] Detection parameters:
  Position = (1038.4, 528.6) = 4 56 43.29 -4 54 22.4
  Extent = 1.1" x 0.7", rotation angle = 93 degrees
  Source counts = 49.1 +/- 7.5
  Background counts = 7.9
  Rate = 0.001 +/- 0.0002

[Fri Oct  7 01:08:28 2011] Off-axis axis estimate = 5.31'
[Fri Oct  7 01:09:31 2011] Using EEF radius (= 1.31 ")to estimate initial spatial extent for simple fitting
[Fri Oct  7 01:09:31 2011] Initial guess for spatial extent in simple fitting = 1.31"
[Fri Oct  7 01:09:31 2011] source mask rpix=2.7, npix_max = 40, mask sum = 49, frac = 1.225
[Fri Oct  7 01:09:31 2011] Giving source the simple spatial ID 10 for pass 0, mean size = 1.31"
[Fri Oct  7 01:09:32 2011] fullrun_ccd7_acisf02069_pi14-548_cl_pass0_src10.ximg exists
[Fri Oct  7 01:09:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf02069_pi14-548_cl_pass0_src10.csv
[Fri Oct  7 01:09:32 2011] fullrun_ccd7_acisf02069_pi14-548_cl_pass0_src10_1.ximg exists
[Fri Oct  7 01:09:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf02069_pi14-548_cl_pass0_src10.csv
[Fri Oct  7 01:09:32 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf02069_pi14-548_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf02069_pi14-548_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 01:09:33 2011] fullrun_ccd7_acisf02069_pi14-548_cl_pass0_tfrozen_src10.ximg exists
[Fri Oct  7 01:09:33 2011] fullrun_ccd7_acisf02069_pi14-548_cl_pass0_tfrozen_src10_1.ximg exists
[Fri Oct  7 01:09:33 2011] Fit fullrun_ccd7_acisf02069_pi14-548_cl_pass0_tfrozen_src10 appears to have run properly
[Fri Oct  7 01:09:45 2011] Spatial fit model total counts = 62.242700, observed total counts = 63.000000
[Fri Oct  7 01:09:45 2011] Offset between fit and detection position for source 3 = 1.006603 pixels
[Fri Oct  7 01:09:45 2011] 60.364040 total counts/ 6.675540 bgd. counts: snr = 20.779642
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 1.006603 pixels
  Position = (1038.9, 529.5) = 4 56 43.29 -4 54 22.2
  Extent = 1.2 (0.8-1.5)", rotation angle = 0
  Source counts = 53.7 +/- 7.8
  Background counts = 6.7
  Rate = 0.001 +/- 0.0002
[Fri Oct  7 01:09:45 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 01:09:45 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 01:09:45 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 01:09:45 2011] Source does appear to be extended
[Fri Oct  7 01:09:45 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 01:10:08 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct  7 01:10:08 2011] Initial guess for spatial extent in simple fitting = 1.20"
[Fri Oct  7 01:10:08 2011] source mask rpix=2.4, npix_max = 34, mask sum = 30, frac = 0.871
[Fri Oct  7 01:10:08 2011] Giving source the simple spatial ID 10 for pass 1, mean size = 1.20"
[Fri Oct  7 01:10:08 2011] fullrun_ccd7_acisf02069_pi14-548_cl_pass1_src10.ximg exists
[Fri Oct  7 01:10:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf02069_pi14-548_cl_pass1_src10.csv
[Fri Oct  7 01:10:09 2011] fullrun_ccd7_acisf02069_pi14-548_cl_pass1_src10_1.ximg exists
[Fri Oct  7 01:10:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf02069_pi14-548_cl_pass1_src10.csv
[Fri Oct  7 01:10:09 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf02069_pi14-548_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf02069_pi14-548_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 01:10:09 2011] fullrun_ccd7_acisf02069_pi14-548_cl_pass1_tfrozen_src10.ximg exists
[Fri Oct  7 01:10:09 2011] fullrun_ccd7_acisf02069_pi14-548_cl_pass1_tfrozen_src10_1.ximg exists
[Fri Oct  7 01:10:09 2011] Fit fullrun_ccd7_acisf02069_pi14-548_cl_pass1_tfrozen_src10 appears to have run properly
[Fri Oct  7 01:10:19 2011] Spatial fit model total counts = 61.961800, observed total counts = 62.000000
[Fri Oct  7 01:10:19 2011] Offset between fit and detection position for source 3 = 0.313685 pixels
[Fri Oct  7 01:10:19 2011] 61.356700 total counts/ 15.253400 bgd. counts: snr = 11.804530
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.313685 pixels
  Position = (1038.7, 529.3) = 4 56 43.30 -4 54 22.3
  Extent = 1.1 (0.8-1.4)", rotation angle = 0
  Source counts = 46.1 +/- 7.8
  Background counts = 15.3
  Rate = 0.001 +/- 0.0002
[Fri Oct  7 01:10:19 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 01:10:19 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 01:10:19 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 01:10:19 2011] Source does appear to be extended
[Fri Oct  7 01:10:19 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 01:12:15 2011] Not overwriting source region fullrun_ccd7_acisf02069_pi14-548_pass1_cl_src3_src.reg
[Fri Oct  7 01:12:15 2011] Extracting stamp from image fullrun_ccd7_acisf02069_pi14-548_cl_sm2.00.img.gz, (990, 481) - (1087, 577)
[Fri Oct  7 01:12:15 2011] Writing fullrun_ccd7_acisf02069_pi14-548_pass1_cl_src3.gif
[Fri Oct  7 01:13:06 2011] ../../acisf02069/products/events/fullrun_ccd7_acisf02069_pi14-548_pass1_cl_src3_src.evt and ../../acisf02069/products/events/fullrun_ccd7_acisf02069_pi14-548_pass1_cl_src3_bgd.evt exist, delete to re-create
[Fri Oct  7 01:13:06 2011] Size of ../../acisf02069/products/events/fullrun_ccd7_acisf02069_pi14-548_pass1_cl_src3_src.evt.gz[events] = 59 counts
[Fri Oct  7 01:13:06 2011] Mean chipx,y = (836.64, 326.36)
[Fri Oct  7 01:13:06 2011] Mean tdetx,y = (4753.64, 2028.36)
[Fri Oct  7 01:13:06 2011] chipx,y range = (816.00-855.00, 308.00-344.00)
[Fri Oct  7 01:13:06 2011] Size of ../../acisf02069/products/events/fullrun_ccd7_acisf02069_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 150 counts
[Fri Oct  7 01:13:06 2011] ../../acisf02069/products/images/fullrun_ccd7_acisf02069_pi14-548_pass1_cl_src3_src.img and ../../acisf02069/products/images/fullrun_ccd7_acisf02069_pi14-548_pass1_cl_src3_bgd.img exist, delete to re-create
[Fri Oct  7 01:13:06 2011] ../../acisf02069/products/spectra/fullrun_ccd7_acisf02069_pi14-548_pass1_cl_src3_src.pi and ../../acisf02069/products/spectra/fullrun_ccd7_acisf02069_pi14-548_pass1_cl_src3_bgd.pi exist, delete to re-create
[Fri Oct  7 01:13:06 2011] Not generating rmf since there are only 46 counts
[Fri Oct  7 01:13:10 2011] ../../acisf02069/products/lightcurves/fullrun_ccd7_acisf02069_pi14-548_pass1_cl_src3_src.lc and ../../acisf02069/products/lightcurves/fullrun_ccd7_acisf02069_pi14-548_pass1_cl_src3_bgd.lc exist, delete to re-create
[Fri Oct  7 01:13:58 2011] 224.659
[Fri Oct  7 01:14:15 2011] Updating aperture counts using extracted products
[Fri Oct  7 01:14:15 2011] Error reading totcts from fullrun_ccd7_acisf02069_pi14-548_pass1_cl_src3_src.pi.gz
[Fri Oct  7 01:14:15 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct  7 01:14:15 2011] Using photon index=1.80, rate=0.00109, arf fullrun_ccd7_acisf02069_pi14-548_pass1_cl_src3.arf
[Fri Oct  7 01:14:15 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct  7 01:14:15 2011] Updating source flux to 6.9e-15
[Fri Oct  7 01:14:27 2011] Source 3 has fewer than 100.000000 counts, skipping spectral fitting