[Tue Mar 13 11:17:02 2012] Detection parameters:
  Position = (1015.0, 657.6) = 13 36 49.79 -29 52 17.6
  Extent = 0.5" x 0.5", rotation angle = 125 degrees
  Source counts = 10.1 +/- 3.5
  Background counts = 1.9
  Rate = 0.001 +/- 0.0004

[Tue Mar 13 11:17:03 2012] Off-axis axis estimate = 1.72'
[Tue Mar 13 11:17:42 2012] Using EEF radius (= 0.41 ")to estimate initial spatial extent for simple fitting
[Tue Mar 13 11:17:42 2012] Initial guess for spatial extent in simple fitting = 0.41"
[Tue Mar 13 11:17:42 2012] source mask rpix=0.8, npix_max = 7, mask sum = 6, frac = 0.855
[Tue Mar 13 11:17:42 2012] Giving source the simple spatial ID 44 for pass 0, mean size = 0.41"
[Tue Mar 13 11:17:44 2012] fullrun_ccd7_acisf02064_pi14-548_cl_pass0_src44.ximg exists
[Tue Mar 13 11:17:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf02064_pi14-548_cl_pass0_src44.csv
[Tue Mar 13 11:17:44 2012] fullrun_ccd7_acisf02064_pi14-548_cl_pass0_src44_1.ximg exists
[Tue Mar 13 11:17:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf02064_pi14-548_cl_pass0_src44.csv
[Tue Mar 13 11:17:44 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf02064_pi14-548_cl_pass0_src44_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf02064_pi14-548_cl_pass0_src44.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 11:17:45 2012] fullrun_ccd7_acisf02064_pi14-548_cl_pass0_tfrozen_src44.ximg exists
[Tue Mar 13 11:17:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf02064_pi14-548_cl_pass0_tfrozen_src44.csv
[Tue Mar 13 11:17:45 2012] fullrun_ccd7_acisf02064_pi14-548_cl_pass0_tfrozen_src44_1.ximg exists
[Tue Mar 13 11:17:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf02064_pi14-548_cl_pass0_tfrozen_src44.csv
[Tue Mar 13 11:17:45 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf02064_pi14-548_cl_pass0_tfrozen_src44_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf02064_pi14-548_cl_pass0_tfrozen_src44.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 11:17:55 2012] Spatial fit model total counts = 12.651600, observed total counts = 15.000000
[Tue Mar 13 11:17:55 2012] Offset between fit and detection position for source 41 = 0.873081 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 41 = 0.873081 pixels
  Position = (1015.3, 658.4) = 13 36 49.80 -29 52 17.4
  Extent = 0.3 (0.3-0.4)", rotation angle = 0
  Source counts = 11.3 +/- 3.4
  Background counts = 0.0
  Rate = 0.001 +/- 0.0004
[Tue Mar 13 11:17:55 2012] Vigneting correction estimate = 1.000000
[Tue Mar 13 11:17:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 13 11:17:55 2012] Assessing source extent using major axis lower bound
[Tue Mar 13 11:17:55 2012] Source does appear to be extended
[Tue Mar 13 11:17:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 13 11:17:55 2012] Deleting source due to low Poisson probability 1.0