[Tue Apr 10 21:19:32 2012] Detection parameters:
  Position = (1041.7, 198.9) = 3 17 42.45 -41 8 30.8
  Extent = 0.9" x 0.6", rotation angle = 67 degrees
  Source counts = 14.7 +/- 4.1
  Background counts = 2.3
  Rate = 0.0004 +/- 0.0001

[Tue Apr 10 21:19:32 2012] Off-axis axis estimate = 3.22'
[Tue Apr 10 21:20:23 2012] Using EEF radius (= 0.63 ")to estimate initial spatial extent for simple fitting
[Tue Apr 10 21:20:23 2012] Initial guess for spatial extent in simple fitting = 0.63"
[Tue Apr 10 21:20:23 2012] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.954
[Tue Apr 10 21:20:23 2012] Giving source the simple spatial ID 8 for pass 0, mean size = 0.63"
[Tue Apr 10 21:20:25 2012] fullrun_ccd6_acisf02059_pi14-548_cl_pass0_src8.ximg exists
[Tue Apr 10 21:20:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf02059_pi14-548_cl_pass0_src8.csv
[Tue Apr 10 21:20:25 2012] fullrun_ccd6_acisf02059_pi14-548_cl_pass0_src8_1.ximg exists
[Tue Apr 10 21:20:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf02059_pi14-548_cl_pass0_src8.csv
[Tue Apr 10 21:20:25 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf02059_pi14-548_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf02059_pi14-548_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 21:20:25 2012] fullrun_ccd6_acisf02059_pi14-548_cl_pass0_tfrozen_src8.ximg exists
[Tue Apr 10 21:20:25 2012] fullrun_ccd6_acisf02059_pi14-548_cl_pass0_tfrozen_src8_1.ximg exists
[Tue Apr 10 21:20:25 2012] Fit fullrun_ccd6_acisf02059_pi14-548_cl_pass0_tfrozen_src8 appears to have run properly
[Tue Apr 10 21:20:39 2012] Spatial fit model total counts = 14.257400, observed total counts = 16.000000
[Tue Apr 10 21:20:39 2012] Offset between fit and detection position for source 5 = 0.604893 pixels
[Tue Apr 10 21:20:39 2012] 13.624221 total counts/ 0.175521 bgd. counts: snr = 32.100793
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.604893 pixels
  Position = (1042.2, 199.0) = 3 17 42.45 -41 8 31.0
  Extent = 1.1 (0.8-1.5)" x 0.4 (0.2-0.6)", rotation angle = 107 (94-122) degrees
  Source counts = 13.4 +/- 3.7
  Background counts = 0.2
  Rate = 0.0004 +/- 0.0001
[Tue Apr 10 21:20:39 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 21:20:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 21:20:39 2012] Assessing source extent using major axis lower bound
[Tue Apr 10 21:20:39 2012] Source does appear to be extended
[Tue Apr 10 21:20:39 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.38
[Tue Apr 10 21:21:03 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Apr 10 21:21:03 2012] Initial guess for spatial extent in simple fitting = 0.75"
[Tue Apr 10 21:21:03 2012] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.984
[Tue Apr 10 21:21:03 2012] Giving source the simple spatial ID 8 for pass 1, mean size = 0.75"
[Tue Apr 10 21:21:04 2012] fullrun_ccd6_acisf02059_pi14-548_cl_pass1_src8.ximg exists
[Tue Apr 10 21:21:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf02059_pi14-548_cl_pass1_src8.csv
[Tue Apr 10 21:21:04 2012] fullrun_ccd6_acisf02059_pi14-548_cl_pass1_src8_1.ximg exists
[Tue Apr 10 21:21:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf02059_pi14-548_cl_pass1_src8.csv
[Tue Apr 10 21:21:04 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf02059_pi14-548_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf02059_pi14-548_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 21:21:04 2012] fullrun_ccd6_acisf02059_pi14-548_cl_pass1_tfrozen_src8.ximg exists
[Tue Apr 10 21:21:04 2012] fullrun_ccd6_acisf02059_pi14-548_cl_pass1_tfrozen_src8_1.ximg exists
[Tue Apr 10 21:21:04 2012] Fit fullrun_ccd6_acisf02059_pi14-548_cl_pass1_tfrozen_src8 appears to have run properly
[Tue Apr 10 21:21:12 2012] Spatial fit model total counts = 15.118400, observed total counts = 16.000000
[Tue Apr 10 21:21:12 2012] Offset between fit and detection position for source 5 = 0.204279 pixels
[Tue Apr 10 21:21:12 2012] 14.667233 total counts/ 0.012333 bgd. counts: snr = 131.960810
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.204279 pixels
  Position = (1042.1, 199.1) = 3 17 42.46 -41 8 31.0
  Extent = 0.8 (0.7-1.1)", rotation angle = 0
  Source counts = 14.7 +/- 3.8
  Background counts = 0.0
  Rate = 0.0004 +/- 0.0001
[Tue Apr 10 21:21:12 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 21:21:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 21:21:12 2012] Assessing source extent using major axis lower bound
[Tue Apr 10 21:21:12 2012] Source does appear to be extended
[Tue Apr 10 21:21:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 21:21:59 2012] Not overwriting source region fullrun_ccd6_acisf02059_pi14-548_pass1_cl_src5_src.reg
[Tue Apr 10 21:21:59 2012] Extracting stamp from image fullrun_ccd6_acisf02059_pi14-548_cl_sm2.00.img.gz, (1005, 162) - (1080, 237)
[Tue Apr 10 21:21:59 2012] Writing fullrun_ccd6_acisf02059_pi14-548_pass1_cl_src5.gif
[Tue Apr 10 21:22:22 2012] ../../acisf02059/products/events/fullrun_ccd6_acisf02059_pi14-548_pass1_cl_src5_src.evt and ../../acisf02059/products/events/fullrun_ccd6_acisf02059_pi14-548_pass1_cl_src5_bgd.evt exist, delete to re-create
[Tue Apr 10 21:22:22 2012] Size of ../../acisf02059/products/events/fullrun_ccd6_acisf02059_pi14-548_pass1_cl_src5_src.evt.gz[events] = 15 counts
[Tue Apr 10 21:22:22 2012] Mean chipx,y = (1012.07, 830.20)
[Tue Apr 10 21:22:22 2012] Mean tdetx,y = (3887.07, 2532.20)
[Tue Apr 10 21:22:22 2012] chipx,y range = (1005.00-1022.00, 817.00-849.00)
[Tue Apr 10 21:22:22 2012] Size of ../../acisf02059/products/events/fullrun_ccd6_acisf02059_pi14-548_pass1_cl_src5_bgd.evt.gz[events] = 13 counts
[Tue Apr 10 21:22:22 2012] ../../acisf02059/products/images/fullrun_ccd6_acisf02059_pi14-548_pass1_cl_src5_src.img and ../../acisf02059/products/images/fullrun_ccd6_acisf02059_pi14-548_pass1_cl_src5_bgd.img exist, delete to re-create
[Tue Apr 10 21:22:22 2012] ../../acisf02059/products/spectra/fullrun_ccd6_acisf02059_pi14-548_pass1_cl_src5_src.pi and ../../acisf02059/products/spectra/fullrun_ccd6_acisf02059_pi14-548_pass1_cl_src5_bgd.pi exist, delete to re-create
[Tue Apr 10 21:22:22 2012] Not generating rmf since there are only 14 counts
[Tue Apr 10 21:22:26 2012] ../../acisf02059/products/lightcurves/fullrun_ccd6_acisf02059_pi14-548_pass1_cl_src5_src.lc and ../../acisf02059/products/lightcurves/fullrun_ccd6_acisf02059_pi14-548_pass1_cl_src5_bgd.lc exist, delete to re-create
[Tue Apr 10 21:22:37 2012] 110.729
[Tue Apr 10 21:26:06 2012] Updating aperture counts using extracted products
[Tue Apr 10 21:26:06 2012] Error reading totcts from fullrun_ccd6_acisf02059_pi14-548_pass1_cl_src5_src.pi.gz
[Tue Apr 10 21:26:07 2012] Calculating source flux in energy range 0.30-8.00
[Tue Apr 10 21:26:07 2012] Using photon index=1.80, rate=0.000447, arf fullrun_ccd6_acisf02059_pi14-548_pass1_cl_src5.arf
[Tue Apr 10 21:26:07 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Apr 10 21:26:07 2012] Updating source flux to 8.1e-15
[Tue Apr 10 21:26:19 2012] Source 5 has fewer than 100.000000 counts, skipping spectral fitting