[Fri Oct 21 20:06:09 2011] Detection parameters:
  Position = (716.4, 335.5) = 0 51 11.98 47 39 49.2
  Extent = 1.2" x 0.9", rotation angle = 54 degrees
  Source counts = 47.1 +/- 7.7
  Background counts = 12.9
  Rate = 0.001 +/- 0.0002

[Fri Oct 21 20:06:09 2011] Off-axis axis estimate = 10.73'
[Fri Oct 21 20:07:02 2011] Using EEF radius (= 5.11 ")to estimate initial spatial extent for simple fitting
[Fri Oct 21 20:07:02 2011] Initial guess for spatial extent in simple fitting = 5.11"
[Fri Oct 21 20:07:02 2011] source mask rpix=10.4, npix_max = 474, mask sum = 437, frac = 0.921
[Fri Oct 21 20:07:02 2011] Giving source the simple spatial ID 6 for pass 0, mean size = 5.11"
[Fri Oct 21 20:07:03 2011] fullrun_ccd2_acisf02056_pi14-548_cl_pass0_src6.ximg exists
[Fri Oct 21 20:07:03 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf02056_pi14-548_cl_pass0_src6.csv
[Fri Oct 21 20:07:03 2011] fullrun_ccd2_acisf02056_pi14-548_cl_pass0_src6_1.ximg exists
[Fri Oct 21 20:07:03 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf02056_pi14-548_cl_pass0_src6.csv
[Fri Oct 21 20:07:03 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf02056_pi14-548_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf02056_pi14-548_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 21 20:07:04 2011] fullrun_ccd2_acisf02056_pi14-548_cl_pass0_tfrozen_src6.ximg exists
[Fri Oct 21 20:07:04 2011] fullrun_ccd2_acisf02056_pi14-548_cl_pass0_tfrozen_src6_1.ximg exists
[Fri Oct 21 20:07:04 2011] Fit fullrun_ccd2_acisf02056_pi14-548_cl_pass0_tfrozen_src6 appears to have run properly
[Fri Oct 21 20:07:17 2011] Spatial fit model total counts = 107.974000, observed total counts = 107.000000
[Fri Oct 21 20:07:17 2011] Offset between fit and detection position for source 6 = 0.911473 pixels
[Fri Oct 21 20:07:17 2011] 108.484600 total counts/ 72.604100 bgd. counts: snr = 4.210929
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.911473 pixels
  Position = (716.9, 336.2) = 0 51 11.98 47 39 49.3
  Extent = 1.8 (1.4-2.7)", rotation angle = 0
  Source counts = 35.9 +/- 10.4
  Background counts = 72.6
  Rate = 0.001 +/- 0.0003
[Fri Oct 21 20:07:17 2011] Vigneting correction estimate = 1.000000
[Fri Oct 21 20:07:17 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 21 20:07:17 2011] Assessing source extent using major axis lower bound
[Fri Oct 21 20:07:17 2011] Source does appear to be extended
[Fri Oct 21 20:07:17 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 21 20:07:44 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct 21 20:07:44 2011] Initial guess for spatial extent in simple fitting = 1.78"
[Fri Oct 21 20:07:44 2011] source mask rpix=3.6, npix_max = 67, mask sum = 64, frac = 0.943
[Fri Oct 21 20:07:44 2011] Giving source the simple spatial ID 6 for pass 1, mean size = 1.78"
[Fri Oct 21 20:07:44 2011] fullrun_ccd2_acisf02056_pi14-548_cl_pass1_src6.ximg exists
[Fri Oct 21 20:07:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf02056_pi14-548_cl_pass1_src6.csv
[Fri Oct 21 20:07:44 2011] fullrun_ccd2_acisf02056_pi14-548_cl_pass1_src6_1.ximg exists
[Fri Oct 21 20:07:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf02056_pi14-548_cl_pass1_src6.csv
[Fri Oct 21 20:07:44 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf02056_pi14-548_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf02056_pi14-548_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 21 20:07:44 2011] fullrun_ccd2_acisf02056_pi14-548_cl_pass1_tfrozen_src6.ximg exists
[Fri Oct 21 20:07:44 2011] fullrun_ccd2_acisf02056_pi14-548_cl_pass1_tfrozen_src6_1.ximg exists
[Fri Oct 21 20:07:44 2011] Fit fullrun_ccd2_acisf02056_pi14-548_cl_pass1_tfrozen_src6 appears to have run properly
[Fri Oct 21 20:07:53 2011] Spatial fit model total counts = 45.613100, observed total counts = 46.000000
[Fri Oct 21 20:07:53 2011] Offset between fit and detection position for source 6 = 0.847978 pixels
[Fri Oct 21 20:07:53 2011] 46.075440 total counts/ 5.931440 bgd. counts: snr = 16.483164
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.847978 pixels
  Position = (716.8, 335.4) = 0 51 11.99 47 39 48.9
  Extent = 1.9 (1.3-2.7)", rotation angle = 0
  Source counts = 40.1 +/- 6.8
  Background counts = 5.9
  Rate = 0.001 +/- 0.0002
[Fri Oct 21 20:07:53 2011] Vigneting correction estimate = 1.000000
[Fri Oct 21 20:07:53 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 21 20:07:53 2011] Assessing source extent using major axis lower bound
[Fri Oct 21 20:07:53 2011] Source does appear to be extended
[Fri Oct 21 20:07:53 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 21 20:08:17 2011] Not overwriting source region fullrun_ccd2_acisf02056_pi14-548_pass1_cl_src6_src.reg
[Fri Oct 21 20:08:17 2011] Extracting stamp from image fullrun_ccd2_acisf02056_pi14-548_cl_sm2.00.img.gz, (628, 246) - (806, 424)
[Fri Oct 21 20:08:17 2011] Writing fullrun_ccd2_acisf02056_pi14-548_pass1_cl_src6.gif
[Fri Oct 21 20:08:32 2011] ../../acisf02056/products/events/fullrun_ccd2_acisf02056_pi14-548_pass1_cl_src6_src.evt and ../../acisf02056/products/events/fullrun_ccd2_acisf02056_pi14-548_pass1_cl_src6_bgd.evt exist, delete to re-create
[Fri Oct 21 20:08:32 2011] Size of ../../acisf02056/products/events/fullrun_ccd2_acisf02056_pi14-548_pass1_cl_src6_src.evt.gz[events] = 60 counts
[Fri Oct 21 20:08:32 2011] Mean chipx,y = (777.65, 337.97)
[Fri Oct 21 20:08:32 2011] Mean tdetx,y = (3398.97, 3308.35)
[Fri Oct 21 20:08:32 2011] chipx,y range = (751.00-808.00, 310.00-357.00)
[Fri Oct 21 20:08:32 2011] Size of ../../acisf02056/products/events/fullrun_ccd2_acisf02056_pi14-548_pass1_cl_src6_bgd.evt.gz[events] = 69 counts
[Fri Oct 21 20:08:32 2011] ../../acisf02056/products/images/fullrun_ccd2_acisf02056_pi14-548_pass1_cl_src6_src.img and ../../acisf02056/products/images/fullrun_ccd2_acisf02056_pi14-548_pass1_cl_src6_bgd.img exist, delete to re-create
[Fri Oct 21 20:08:32 2011] ../../acisf02056/products/spectra/fullrun_ccd2_acisf02056_pi14-548_pass1_cl_src6_src.pi and ../../acisf02056/products/spectra/fullrun_ccd2_acisf02056_pi14-548_pass1_cl_src6_bgd.pi exist, delete to re-create
[Fri Oct 21 20:08:32 2011] Not generating rmf since there are only 40 counts
[Fri Oct 21 20:08:35 2011] ../../acisf02056/products/lightcurves/fullrun_ccd2_acisf02056_pi14-548_pass1_cl_src6_src.lc and ../../acisf02056/products/lightcurves/fullrun_ccd2_acisf02056_pi14-548_pass1_cl_src6_bgd.lc exist, delete to re-create
[Fri Oct 21 20:08:36 2011] 155.985
[Fri Oct 21 20:12:18 2011] Updating aperture counts using extracted products
[Fri Oct 21 20:12:18 2011] Error reading totcts from fullrun_ccd2_acisf02056_pi14-548_pass1_cl_src6_src.pi.gz
[Fri Oct 21 20:12:18 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 21 20:12:18 2011] Using photon index=1.80, rate=0.00108, arf fullrun_ccd2_acisf02056_pi14-548_pass1_cl_src6.arf
[Fri Oct 21 20:12:18 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 21 20:12:18 2011] Updating source flux to 1.4e-14
[Fri Oct 21 20:12:22 2011] Source 6 has fewer than 100.000000 counts, skipping spectral fitting