[Sat Oct 22 19:31:25 2011] Detection parameters:
  Position = (456.7, 69.0) = 0 42 42.53 40 51 52.8
  Extent = 4.8" x 3.5", rotation angle = 102 degrees
  Source counts = 682.4 +/- 29.2
  Background counts = 169.6
  Rate = 0.05 +/- 0.002

[Sat Oct 22 19:31:26 2011] Off-axis axis estimate = 10.61'
[Sat Oct 22 19:32:03 2011] Using EEF radius (= 5.00 ")to estimate initial spatial extent for simple fitting
[Sat Oct 22 19:32:03 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Oct 22 19:32:03 2011] Initial guess for spatial extent in simple fitting = 5.00"
[Sat Oct 22 19:32:03 2011] source mask rpix=10.2, npix_max = 454, mask sum = 462, frac = 1.017
[Sat Oct 22 19:32:03 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 5.00"
[Sat Oct 22 19:32:04 2011] fullrun_ccd6_acisf02050_pi14-548_cl_pass0_src1.ximg exists
[Sat Oct 22 19:32:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf02050_pi14-548_cl_pass0_src1.csv
[Sat Oct 22 19:32:04 2011] fullrun_ccd6_acisf02050_pi14-548_cl_pass0_src1_1.ximg exists
[Sat Oct 22 19:32:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf02050_pi14-548_cl_pass0_src1.csv
[Sat Oct 22 19:32:04 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf02050_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf02050_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 22 19:32:04 2011] fullrun_ccd6_acisf02050_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Sat Oct 22 19:32:04 2011] fullrun_ccd6_acisf02050_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Oct 22 19:32:04 2011] Fit fullrun_ccd6_acisf02050_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Oct 22 19:32:11 2011] Spatial fit model total counts = 904.294000, observed total counts = 906.000000
[Sat Oct 22 19:32:11 2011] Offset between fit and detection position for source 1 = 0.846389 pixels
[Sat Oct 22 19:32:11 2011] 905.954000 total counts/ 44.452000 bgd. counts: snr = 129.214317
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.846389 pixels
  Position = (457.5, 69.0) = 0 42 42.52 40 51 52.6
  Extent = 5.8 (5.5-6.2)", rotation angle = 0
  Source counts = 861.5 +/- 30.1
  Background counts = 44.5
  Rate = 0.07 +/- 0.002
[Sat Oct 22 19:32:11 2011] Vigneting correction estimate = 1.000000
[Sat Oct 22 19:32:11 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 22 19:32:11 2011] Assessing source extent using major axis lower bound
[Sat Oct 22 19:32:11 2011] Source does appear to be extended
[Sat Oct 22 19:32:11 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 22 19:32:28 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct 22 19:32:28 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Oct 22 19:32:28 2011] Initial guess for spatial extent in simple fitting = 5.85"
[Sat Oct 22 19:32:28 2011] source mask rpix=11.9, npix_max = 613, mask sum = 600, frac = 0.978
[Sat Oct 22 19:32:28 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 5.85"
[Sat Oct 22 19:32:29 2011] fullrun_ccd6_acisf02050_pi14-548_cl_pass1_src1.ximg exists
[Sat Oct 22 19:32:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf02050_pi14-548_cl_pass1_src1.csv
[Sat Oct 22 19:32:29 2011] fullrun_ccd6_acisf02050_pi14-548_cl_pass1_src1_1.ximg exists
[Sat Oct 22 19:32:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf02050_pi14-548_cl_pass1_src1.csv
[Sat Oct 22 19:32:29 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf02050_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf02050_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 22 19:32:29 2011] fullrun_ccd6_acisf02050_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Sat Oct 22 19:32:29 2011] fullrun_ccd6_acisf02050_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Oct 22 19:32:29 2011] Fit fullrun_ccd6_acisf02050_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Oct 22 19:32:37 2011] Spatial fit model total counts = 937.285000, observed total counts = 929.000000
[Sat Oct 22 19:32:37 2011] Offset between fit and detection position for source 1 = 0.296784 pixels
[Sat Oct 22 19:32:37 2011] 938.356400 total counts/ 77.807400 bgd. counts: snr = 97.558509
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.296784 pixels
  Position = (457.6, 69.3) = 0 42 42.52 40 51 52.7
  Extent = 5.8 (5.5-6.1)", rotation angle = 0
  Source counts = 860.5 +/- 30.6
  Background counts = 77.8
  Rate = 0.07 +/- 0.002
[Sat Oct 22 19:32:37 2011] Vigneting correction estimate = 1.000000
[Sat Oct 22 19:32:37 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 22 19:32:37 2011] Assessing source extent using major axis lower bound
[Sat Oct 22 19:32:37 2011] Source does appear to be extended
[Sat Oct 22 19:32:37 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 22 19:33:54 2011] Not overwriting source region fullrun_ccd6_acisf02050_pi14-548_pass1_cl_src1_src.reg
[Sat Oct 22 19:33:54 2011] Extracting stamp from image fullrun_ccd6_acisf02050_pi14-548_cl_sm2.00.img.gz, (191, 0) - (724, 335)
[Sat Oct 22 19:33:54 2011] Writing fullrun_ccd6_acisf02050_pi14-548_pass1_cl_src1.gif
[Sat Oct 22 19:33:55 2011] ../../acisf02050/products/events/fullrun_ccd6_acisf02050_pi14-548_pass1_cl_src1_src.evt and ../../acisf02050/products/events/fullrun_ccd6_acisf02050_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Sat Oct 22 19:33:55 2011] Size of ../../acisf02050/products/events/fullrun_ccd6_acisf02050_pi14-548_pass1_cl_src1_src.evt.gz[events] = 915 counts
[Sat Oct 22 19:33:55 2011] Mean chipx,y = (33.66, 937.50)
[Sat Oct 22 19:33:55 2011] Mean tdetx,y = (2908.66, 2639.50)
[Sat Oct 22 19:33:55 2011] chipx,y range = (2.00-82.00, 884.00-990.00)
[Sat Oct 22 19:33:55 2011] Size of ../../acisf02050/products/events/fullrun_ccd6_acisf02050_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 138 counts
[Sat Oct 22 19:33:55 2011] ../../acisf02050/products/images/fullrun_ccd6_acisf02050_pi14-548_pass1_cl_src1_src.img and ../../acisf02050/products/images/fullrun_ccd6_acisf02050_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Sat Oct 22 19:33:55 2011] rmf not found, will run specextract
[Sat Oct 22 19:33:55 2011] arf not found, will run specextract
[Sat Oct 22 19:33:57 2011] ../../acisf02050/products/spectra/fullrun_ccd6_acisf02050_pi14-548_pass1_cl_src1_bkg.pi not found
[Sat Oct 22 19:33:57 2011] ../../acisf02050/products/spectra/fullrun_ccd6_acisf02050_pi14-548_pass1_cl_src1.warf not found
[Sat Oct 22 19:33:57 2011] ../../acisf02050/products/spectra/fullrun_ccd6_acisf02050_pi14-548_pass1_cl_src1.wrmf not found
[Sat Oct 22 19:33:57 2011] Removal of ../../acisf02050/products/spectra/fullrun_ccd6_acisf02050_pi14-548_pass1_cl_src1.soff failed
[Sat Oct 22 19:33:57 2011] Failed to rename ../../acisf02050/products/spectra/fullrun_ccd6_acisf02050_pi14-548_pass1_cl_src1_grp.pi to ../../acisf02050/products/spectra/fullrun_ccd6_acisf02050_pi14-548_pass1_cl_src1_src.pi
[Sat Oct 22 19:34:02 2011] ../../acisf02050/products/lightcurves/fullrun_ccd6_acisf02050_pi14-548_pass1_cl_src1_src.lc and ../../acisf02050/products/lightcurves/fullrun_ccd6_acisf02050_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Sat Oct 22 19:35:12 2011] No arf file found
[Sat Oct 22 19:36:47 2011] Updating aperture counts using extracted products
[Sat Oct 22 19:36:47 2011] Error reading totcts from fullrun_ccd6_acisf02050_pi14-548_pass1_cl_src1_src.pi
[Sat Oct 22 19:36:47 2011] No arf file for this source, not re-computing flux
[Sat Oct 22 19:36:53 2011] Source 1 has no response, skipping
[Sat Oct 22 19:36:54 2011] acisf02050/analysis//spectral/fullrun_ccd6_acisf02050_pi14-548_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete