[Tue Sep 27 14:46:13 2011] Detection parameters:
  Position = (849.3, 378.8) = 23 39 2.61 -12 22 19.3
  Extent = 3.4" x 2.7", rotation angle = 134 degrees
  Source counts = 73.9 +/- 11.0
  Background counts = 47.1
  Rate = 0.004 +/- 0.0006

[Tue Sep 27 14:46:13 2011] Off-axis axis estimate = 13.60'
[Tue Sep 27 14:47:19 2011] Using EEF radius (= 8.31 ")to estimate initial spatial extent for simple fitting
[Tue Sep 27 14:47:19 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Sep 27 14:47:19 2011] Initial guess for spatial extent in simple fitting = 8.31"
[Tue Sep 27 14:47:19 2011] source mask rpix=16.9, npix_max = 1210, mask sum = 1210, frac = 0.999
[Tue Sep 27 14:47:19 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 8.31"
[Tue Sep 27 14:47:19 2011] fullrun_ccd3_acisf02045_pi14-548_cl_pass0_src1.ximg exists
[Tue Sep 27 14:47:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf02045_pi14-548_cl_pass0_src1.csv
[Tue Sep 27 14:47:19 2011] fullrun_ccd3_acisf02045_pi14-548_cl_pass0_src1_1.ximg exists
[Tue Sep 27 14:47:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf02045_pi14-548_cl_pass0_src1.csv
[Tue Sep 27 14:47:19 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf02045_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf02045_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep 27 14:47:20 2011] fullrun_ccd3_acisf02045_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Tue Sep 27 14:47:21 2011] fullrun_ccd3_acisf02045_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Sep 27 14:47:21 2011] Fit fullrun_ccd3_acisf02045_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Sep 27 14:47:30 2011] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 96.665408 pixels away
[Tue Sep 27 14:47:30 2011] Vigneting correction estimate = 1.000000
[Tue Sep 27 14:47:30 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep 27 14:47:30 2011] Assessing source extent using major
[Tue Sep 27 14:47:30 2011] Source does appear to be extended
[Tue Sep 27 14:47:30 2011] Computing asymmetry using major and minor axis, asym = 1.27
[Tue Sep 27 14:47:52 2011] Using EEF radius (= 8.31 ")to estimate initial spatial extent for simple fitting
[Tue Sep 27 14:47:52 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Sep 27 14:47:52 2011] Initial guess for spatial extent in simple fitting = 8.31"
[Tue Sep 27 14:47:52 2011] source mask rpix=16.9, npix_max = 1210, mask sum = 1210, frac = 0.999
[Tue Sep 27 14:47:52 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 8.31"
[Tue Sep 27 14:47:53 2011] fullrun_ccd3_acisf02045_pi14-548_cl_pass1_src1.ximg exists
[Tue Sep 27 14:47:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf02045_pi14-548_cl_pass1_src1.csv
[Tue Sep 27 14:47:53 2011] fullrun_ccd3_acisf02045_pi14-548_cl_pass1_src1_1.ximg exists
[Tue Sep 27 14:47:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf02045_pi14-548_cl_pass1_src1.csv
[Tue Sep 27 14:47:53 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf02045_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf02045_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep 27 14:47:53 2011] fullrun_ccd3_acisf02045_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Tue Sep 27 14:47:53 2011] fullrun_ccd3_acisf02045_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Sep 27 14:47:53 2011] Fit fullrun_ccd3_acisf02045_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Sep 27 14:48:00 2011] Spatial fit model total counts = 182.381000, observed total counts = 183.000000
[Tue Sep 27 14:48:00 2011] Offset between fit and detection position for source 1 = 3.215541 pixels
[Tue Sep 27 14:48:00 2011] 182.457700 total counts/ 60.693700 bgd. counts: snr = 15.629573
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 3.215541 pixels
  Position = (852.5, 379.1) = 23 39 2.52 -12 22 19.4
  Extent = 9.4 (7.9-10.9)", rotation angle = 0
  Source counts = 121.8 +/- 13.5
  Background counts = 60.7
  Rate = 0.006 +/- 0.0007
[Tue Sep 27 14:48:00 2011] Vigneting correction estimate = 1.000000
[Tue Sep 27 14:48:00 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep 27 14:48:00 2011] Assessing source extent using major axis lower bound
[Tue Sep 27 14:48:00 2011] Source does appear to be extended
[Tue Sep 27 14:48:00 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep 27 14:48:50 2011] Not overwriting source region fullrun_ccd3_acisf02045_pi14-548_pass1_cl_src1_src.reg
[Tue Sep 27 14:48:50 2011] Extracting stamp from image fullrun_ccd3_acisf02045_pi14-548_cl_sm2.00.img.gz, (422, 0) - (1283, 809)
[Tue Sep 27 14:48:50 2011] Writing fullrun_ccd3_acisf02045_pi14-548_pass1_cl_src1.gif
[Tue Sep 27 14:48:52 2011] ../../acisf02045/products/events/fullrun_ccd3_acisf02045_pi14-548_pass1_cl_src1_src.evt and ../../acisf02045/products/events/fullrun_ccd3_acisf02045_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Tue Sep 27 14:48:52 2011] Size of ../../acisf02045/products/events/fullrun_ccd3_acisf02045_pi14-548_pass1_cl_src1_src.evt.gz[events] = 188 counts
[Tue Sep 27 14:48:52 2011] Mean chipx,y = (791.10, 695.44)
[Tue Sep 27 14:48:52 2011] Mean tdetx,y = (4436.56, 3852.10)
[Tue Sep 27 14:48:52 2011] chipx,y range = (702.00-879.00, 613.00-775.00)
[Tue Sep 27 14:48:52 2011] Size of ../../acisf02045/products/events/fullrun_ccd3_acisf02045_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 814 counts
[Tue Sep 27 14:48:52 2011] ../../acisf02045/products/images/fullrun_ccd3_acisf02045_pi14-548_pass1_cl_src1_src.img and ../../acisf02045/products/images/fullrun_ccd3_acisf02045_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Tue Sep 27 14:48:52 2011] ../../acisf02045/products/spectra/fullrun_ccd3_acisf02045_pi14-548_pass1_cl_src1_src.pi and ../../acisf02045/products/spectra/fullrun_ccd3_acisf02045_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Tue Sep 27 14:48:56 2011] ../../acisf02045/products/lightcurves/fullrun_ccd3_acisf02045_pi14-548_pass1_cl_src1_src.lc and ../../acisf02045/products/lightcurves/fullrun_ccd3_acisf02045_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Tue Sep 27 14:49:04 2011] Keeping rmf generated by specextract
[Tue Sep 27 14:49:04 2011] 148.453
[Tue Sep 27 14:52:12 2011] Updating aperture counts using extracted products
[Tue Sep 27 14:52:12 2011] Error reading totcts from fullrun_ccd3_acisf02045_pi14-548_pass1_cl_src1_src.pi.gz
[Tue Sep 27 14:52:12 2011] Calculating source flux in energy range 0.30-8.00
[Tue Sep 27 14:52:12 2011] Using photon index=1.80, rate=0.00641, arf fullrun_ccd3_acisf02045_pi14-548_pass1_cl_src1.arf
[Tue Sep 27 14:52:12 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Sep 27 14:52:12 2011] Updating source flux to 8.7e-14
[Tue Sep 27 14:52:21 2011] Reading fit data from acisf02045/analysis//spectral/fullrun_ccd3_acisf02045_pi14-548_pass1_cl_src1_pl.csv
[Tue Sep 27 14:52:21 2011] Spectral fit parameter nH value = 1.64929e+21
[Tue Sep 27 14:52:21 2011] Spectral fit parameter PhoIndex value = 2.44795
[Tue Sep 27 14:52:21 2011] Failed to get F(0.3-8.0) from acisf02045/analysis//spectral/fullrun_ccd3_acisf02045_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Tue Sep 27 14:52:21 2011] Calculating source flux in energy range 0.30-8.00
[Tue Sep 27 14:52:21 2011] Using Nh = 1.6e+21, photon index=2.45, rate=0.00641, arf fullrun_ccd3_acisf02045_pi14-548_pass1_cl_src1.arf
[Tue Sep 27 14:52:21 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Sep 27 14:52:21 2011] Updating source flux to 6.9e-14