[Tue Sep 27 14:46:11 2011] Detection parameters:
  Position = (508.5, 266.5) = 23 39 26.87 -12 31 9.6
  Extent = 0.5" x 0.5", rotation angle = 90 degrees
  Source counts = 23.9 +/- 6.2
  Background counts = 14.1
  Rate = 0.001 +/- 0.0003

[Tue Sep 27 14:46:12 2011] Off-axis axis estimate = 13.70'
[Tue Sep 27 14:47:14 2011] Using EEF radius (= 8.44 ")to estimate initial spatial extent for simple fitting
[Tue Sep 27 14:47:14 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Sep 27 14:47:14 2011] Initial guess for spatial extent in simple fitting = 8.44"
[Tue Sep 27 14:47:14 2011] source mask rpix=17.2, npix_max = 1246, mask sum = 1112, frac = 0.892
[Tue Sep 27 14:47:14 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 8.44"
[Tue Sep 27 14:47:16 2011] fullrun_ccd2_acisf02045_pi14-548_cl_pass0_src1.ximg exists
[Tue Sep 27 14:47:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf02045_pi14-548_cl_pass0_src1.csv
[Tue Sep 27 14:47:17 2011] fullrun_ccd2_acisf02045_pi14-548_cl_pass0_src1_1.ximg exists
[Tue Sep 27 14:47:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf02045_pi14-548_cl_pass0_src1.csv
[Tue Sep 27 14:47:17 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf02045_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf02045_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep 27 14:47:18 2011] fullrun_ccd2_acisf02045_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Tue Sep 27 14:47:18 2011] fullrun_ccd2_acisf02045_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Sep 27 14:47:18 2011] Fit fullrun_ccd2_acisf02045_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Sep 27 14:47:28 2011] Spatial fit model total counts = 119.278000, observed total counts = 113.000000
[Tue Sep 27 14:47:28 2011] Offset between fit and detection position for source 1 = 9.784698 pixels
[Tue Sep 27 14:47:28 2011] 119.484000 total counts/ 49.764400 bgd. counts: snr = 9.883153
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 9.784698 pixels
  Position = (509.9, 276.2) = 23 39 26.84 -12 31 5.1
  Extent = 10.1 (7.3-14.1)", rotation angle = 0
  Source counts = 69.7 +/- 10.9
  Background counts = 49.8
  Rate = 0.004 +/- 0.0006
[Tue Sep 27 14:47:28 2011] Vigneting correction estimate = 1.000000
[Tue Sep 27 14:47:28 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep 27 14:47:28 2011] Assessing source extent using major axis lower bound
[Tue Sep 27 14:47:28 2011] Source does appear to be extended
[Tue Sep 27 14:47:28 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep 27 14:47:52 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Sep 27 14:47:52 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Sep 27 14:47:52 2011] Initial guess for spatial extent in simple fitting = 10.11"
[Tue Sep 27 14:47:52 2011] source mask rpix=20.6, npix_max = 1773, mask sum = 1625, frac = 0.916
[Tue Sep 27 14:47:52 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 10.11"
[Tue Sep 27 14:47:52 2011] fullrun_ccd2_acisf02045_pi14-548_cl_pass1_src1.ximg exists
[Tue Sep 27 14:47:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf02045_pi14-548_cl_pass1_src1.csv
[Tue Sep 27 14:47:52 2011] fullrun_ccd2_acisf02045_pi14-548_cl_pass1_src1_1.ximg exists
[Tue Sep 27 14:47:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf02045_pi14-548_cl_pass1_src1.csv
[Tue Sep 27 14:47:52 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf02045_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf02045_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep 27 14:47:52 2011] fullrun_ccd2_acisf02045_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Tue Sep 27 14:47:52 2011] fullrun_ccd2_acisf02045_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Sep 27 14:47:52 2011] Fit fullrun_ccd2_acisf02045_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Sep 27 14:47:58 2011] Spatial fit model total counts = 145.861000, observed total counts = 139.000000
[Tue Sep 27 14:47:58 2011] Offset between fit and detection position for source 1 = 0.360027 pixels
[Tue Sep 27 14:47:58 2011] 146.129100 total counts/ 76.519900 bgd. counts: snr = 7.957551
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.360027 pixels
  Position = (510.0, 276.5) = 23 39 26.83 -12 31 4.9
  Extent = 10.2 (7.7-13.0)", rotation angle = 0
  Source counts = 69.6 +/- 12.1
  Background counts = 76.5
  Rate = 0.004 +/- 0.0006
[Tue Sep 27 14:47:58 2011] Vigneting correction estimate = 1.000000
[Tue Sep 27 14:47:58 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep 27 14:47:58 2011] Assessing source extent using major axis lower bound
[Tue Sep 27 14:47:58 2011] Source does appear to be extended
[Tue Sep 27 14:47:58 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep 27 14:48:22 2011] Not overwriting source region fullrun_ccd2_acisf02045_pi14-548_pass1_cl_src1_src.reg
[Tue Sep 27 14:48:22 2011] Extracting stamp from image fullrun_ccd2_acisf02045_pi14-548_cl_sm2.00.img.gz, (45, 0) - (975, 742)
[Tue Sep 27 14:48:22 2011] Writing fullrun_ccd2_acisf02045_pi14-548_pass1_cl_src1.gif
[Tue Sep 27 14:48:23 2011] ../../acisf02045/products/events/fullrun_ccd2_acisf02045_pi14-548_pass1_cl_src1_src.evt and ../../acisf02045/products/events/fullrun_ccd2_acisf02045_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Tue Sep 27 14:48:23 2011] Size of ../../acisf02045/products/events/fullrun_ccd2_acisf02045_pi14-548_pass1_cl_src1_src.evt.gz[events] = 124 counts
[Tue Sep 27 14:48:23 2011] Mean chipx,y = (506.33, 113.67)
[Tue Sep 27 14:48:23 2011] Mean tdetx,y = (3174.67, 3579.67)
[Tue Sep 27 14:48:23 2011] chipx,y range = (432.00-609.00, 26.00-205.00)
[Tue Sep 27 14:48:23 2011] Size of ../../acisf02045/products/events/fullrun_ccd2_acisf02045_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 576 counts
[Tue Sep 27 14:48:23 2011] ../../acisf02045/products/images/fullrun_ccd2_acisf02045_pi14-548_pass1_cl_src1_src.img and ../../acisf02045/products/images/fullrun_ccd2_acisf02045_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Tue Sep 27 14:48:23 2011] ../../acisf02045/products/spectra/fullrun_ccd2_acisf02045_pi14-548_pass1_cl_src1_src.pi and ../../acisf02045/products/spectra/fullrun_ccd2_acisf02045_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Tue Sep 27 14:48:23 2011] Not generating rmf since there are only 69 counts
[Tue Sep 27 14:48:28 2011] ../../acisf02045/products/lightcurves/fullrun_ccd2_acisf02045_pi14-548_pass1_cl_src1_src.lc and ../../acisf02045/products/lightcurves/fullrun_ccd2_acisf02045_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Tue Sep 27 14:48:49 2011] 149.76
[Tue Sep 27 14:52:12 2011] Updating aperture counts using extracted products
[Tue Sep 27 14:52:12 2011] Error reading totcts from fullrun_ccd2_acisf02045_pi14-548_pass1_cl_src1_src.pi.gz
[Tue Sep 27 14:52:12 2011] Calculating source flux in energy range 0.30-8.00
[Tue Sep 27 14:52:12 2011] Using photon index=1.80, rate=0.00366, arf fullrun_ccd2_acisf02045_pi14-548_pass1_cl_src1.arf
[Tue Sep 27 14:52:12 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Sep 27 14:52:12 2011] Updating source flux to 5.1e-14
[Tue Sep 27 14:52:16 2011] Source 1 has fewer than 100.000000 counts, skipping spectral fitting
[Tue Sep 27 14:52:17 2011] acisf02045/analysis//spectral/fullrun_ccd2_acisf02045_pi14-548_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete