[Sat Oct 29 06:25:04 2011] Detection parameters:
  Position = (1160.8, 684.9) = 10 5 0.34 -7 42 6.7
  Extent = 0.7" x 0.5", rotation angle = 59 degrees
  Source counts = 10.4 +/- 3.5
  Background counts = 1.6
  Rate = 0.0003 +/- 9e-05

[Sat Oct 29 06:25:05 2011] Off-axis axis estimate = 3.40'
[Sat Oct 29 06:25:58 2011] Using EEF radius (= 0.67 ")to estimate initial spatial extent for simple fitting
[Sat Oct 29 06:25:58 2011] Initial guess for spatial extent in simple fitting = 0.67"
[Sat Oct 29 06:25:58 2011] source mask rpix=1.4, npix_max = 13, mask sum = 16, frac = 1.161
[Sat Oct 29 06:25:58 2011] Giving source the simple spatial ID 65 for pass 0, mean size = 0.67"
[Sat Oct 29 06:26:01 2011] fullrun_ccd7_acisf02040_pi14-548_cl_pass0_src65.ximg exists
[Sat Oct 29 06:26:01 2011] fullrun_ccd7_acisf02040_pi14-548_cl_pass0_src65_1.ximg exists
[Sat Oct 29 06:26:01 2011] Fit fullrun_ccd7_acisf02040_pi14-548_cl_pass0_src65 appears to have run properly
[Sat Oct 29 06:26:02 2011] fullrun_ccd7_acisf02040_pi14-548_cl_pass0_tfrozen_src65.ximg exists
[Sat Oct 29 06:26:02 2011] fullrun_ccd7_acisf02040_pi14-548_cl_pass0_tfrozen_src65_1.ximg exists
[Sat Oct 29 06:26:02 2011] Fit fullrun_ccd7_acisf02040_pi14-548_cl_pass0_tfrozen_src65 appears to have run properly
[Sat Oct 29 06:26:21 2011] Spatial fit model total counts = 12.784100, observed total counts = 13.000000
[Sat Oct 29 06:26:21 2011] Offset between fit and detection position for source 80 = 0.595528 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 80 = 0.595528 pixels
  Position = (1161.2, 685.3) = 10 5 0.34 -7 42 6.7
  Extent = 0.8 (0.6-1.1)", rotation angle = 0
  Source counts = 13.1 +/- 3.6
  Background counts = 0.0
  Rate = 0.0004 +/- 0.0001
[Sat Oct 29 06:26:21 2011] Vigneting correction estimate = 1.000000
[Sat Oct 29 06:26:21 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 29 06:26:21 2011] Assessing source extent using major axis lower bound
[Sat Oct 29 06:26:21 2011] Source does appear to be extended
[Sat Oct 29 06:26:21 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 29 06:26:45 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct 29 06:26:45 2011] Initial guess for spatial extent in simple fitting = 0.81"
[Sat Oct 29 06:26:45 2011] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.869
[Sat Oct 29 06:26:45 2011] Giving source the simple spatial ID 63 for pass 1, mean size = 0.81"
[Sat Oct 29 06:26:54 2011] fullrun_ccd7_acisf02040_pi14-548_cl_pass1_src63.ximg exists
[Sat Oct 29 06:26:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf02040_pi14-548_cl_pass1_src63.csv
[Sat Oct 29 06:26:54 2011] fullrun_ccd7_acisf02040_pi14-548_cl_pass1_src63_1.ximg exists
[Sat Oct 29 06:26:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf02040_pi14-548_cl_pass1_src63.csv
[Sat Oct 29 06:26:54 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf02040_pi14-548_cl_pass1_src63_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf02040_pi14-548_cl_pass1_src63.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 29 06:26:55 2011] fullrun_ccd7_acisf02040_pi14-548_cl_pass1_tfrozen_src63.ximg exists
[Sat Oct 29 06:26:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf02040_pi14-548_cl_pass1_tfrozen_src63.csv
[Sat Oct 29 06:26:55 2011] fullrun_ccd7_acisf02040_pi14-548_cl_pass1_tfrozen_src63_1.ximg exists
[Sat Oct 29 06:26:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf02040_pi14-548_cl_pass1_tfrozen_src63.csv
[Sat Oct 29 06:26:55 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf02040_pi14-548_cl_pass1_tfrozen_src63_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf02040_pi14-548_cl_pass1_tfrozen_src63.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 29 06:27:12 2011] Spatial fit model total counts = 11.555000, observed total counts = 15.000000
[Sat Oct 29 06:27:12 2011] Offset between fit and detection position for source 80 = 0.191650 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 80 = 0.191650 pixels
  Position = (1161.3, 685.1) = 10 5 0.34 -7 42 6.8
  Extent = 0.9 (0.7-1.1)", rotation angle = 0
  Source counts = 12.2 +/- 3.5
  Background counts = 0.0
  Rate = 0.0003 +/- 9e-05
[Sat Oct 29 06:27:12 2011] Vigneting correction estimate = 1.000000
[Sat Oct 29 06:27:12 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 29 06:27:12 2011] Assessing source extent using major axis lower bound
[Sat Oct 29 06:27:12 2011] Source does appear to be extended
[Sat Oct 29 06:27:12 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 29 06:29:11 2011] Not overwriting source region fullrun_ccd7_acisf02040_pi14-548_pass1_cl_src80_src.reg
[Sat Oct 29 06:29:11 2011] Extracting stamp from image fullrun_ccd7_acisf02040_pi14-548_cl_sm2.00.img.gz, (1122, 646) - (1200, 724)
[Sat Oct 29 06:29:11 2011] Writing fullrun_ccd7_acisf02040_pi14-548_pass1_cl_src80.gif
[Sat Oct 29 06:32:07 2011] ../../acisf02040/products/events/fullrun_ccd7_acisf02040_pi14-548_pass1_cl_src80_src.evt and ../../acisf02040/products/events/fullrun_ccd7_acisf02040_pi14-548_pass1_cl_src80_bgd.evt exist, delete to re-create
[Sat Oct 29 06:32:07 2011] Size of ../../acisf02040/products/events/fullrun_ccd7_acisf02040_pi14-548_pass1_cl_src80_src.evt.gz[events] = 12 counts
[Sat Oct 29 06:32:07 2011] Mean chipx,y = (289.25, 928.58)
[Sat Oct 29 06:32:07 2011] Mean tdetx,y = (4206.25, 2630.58)
[Sat Oct 29 06:32:07 2011] chipx,y range = (275.00-308.00, 910.00-945.00)
[Sat Oct 29 06:32:07 2011] Size of ../../acisf02040/products/events/fullrun_ccd7_acisf02040_pi14-548_pass1_cl_src80_bgd.evt.gz[events] = 40 counts
[Sat Oct 29 06:32:07 2011] ../../acisf02040/products/images/fullrun_ccd7_acisf02040_pi14-548_pass1_cl_src80_src.img and ../../acisf02040/products/images/fullrun_ccd7_acisf02040_pi14-548_pass1_cl_src80_bgd.img exist, delete to re-create
[Sat Oct 29 06:32:07 2011] ../../acisf02040/products/spectra/fullrun_ccd7_acisf02040_pi14-548_pass1_cl_src80_src.pi and ../../acisf02040/products/spectra/fullrun_ccd7_acisf02040_pi14-548_pass1_cl_src80_bgd.pi exist, delete to re-create
[Sat Oct 29 06:32:07 2011] Not generating rmf since there are only 12 counts
[Sat Oct 29 06:32:10 2011] ../../acisf02040/products/lightcurves/fullrun_ccd7_acisf02040_pi14-548_pass1_cl_src80_src.lc and ../../acisf02040/products/lightcurves/fullrun_ccd7_acisf02040_pi14-548_pass1_cl_src80_bgd.lc exist, delete to re-create
[Sat Oct 29 06:32:59 2011] 232.437
[Sat Oct 29 06:33:04 2011] Updating aperture counts using extracted products
[Sat Oct 29 06:33:04 2011] Error reading totcts from fullrun_ccd7_acisf02040_pi14-548_pass1_cl_src80_src.pi.gz
[Sat Oct 29 06:33:05 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 29 06:33:05 2011] Using photon index=1.80, rate=0.000331, arf fullrun_ccd7_acisf02040_pi14-548_pass1_cl_src80.arf
[Sat Oct 29 06:33:05 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct 29 06:33:05 2011] Updating source flux to 2.3e-15
[Sat Oct 29 06:33:27 2011] Source 80 has fewer than 100.000000 counts, skipping spectral fitting