[Sat Oct 29 06:25:02 2011] Detection parameters:
  Position = (713.1, 591.5) = 10 5 15.16 -7 42 52.6
  Extent = 0.6" x 0.5", rotation angle = 139 degrees
  Source counts = 27.3 +/- 5.7
  Background counts = 4.7
  Rate = 0.0007 +/- 0.0002

[Sat Oct 29 06:25:05 2011] Off-axis axis estimate = 1.67'
[Sat Oct 29 06:25:58 2011] Using EEF radius (= 0.40 ")to estimate initial spatial extent for simple fitting
[Sat Oct 29 06:25:58 2011] Initial guess for spatial extent in simple fitting = 0.40"
[Sat Oct 29 06:25:58 2011] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.864
[Sat Oct 29 06:25:58 2011] Giving source the simple spatial ID 27 for pass 0, mean size = 0.40"
[Sat Oct 29 06:25:59 2011] fullrun_ccd7_acisf02040_pi14-548_cl_pass0_src27.ximg exists
[Sat Oct 29 06:25:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf02040_pi14-548_cl_pass0_src27.csv
[Sat Oct 29 06:25:59 2011] fullrun_ccd7_acisf02040_pi14-548_cl_pass0_src27_1.ximg exists
[Sat Oct 29 06:25:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf02040_pi14-548_cl_pass0_src27.csv
[Sat Oct 29 06:25:59 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf02040_pi14-548_cl_pass0_src27_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf02040_pi14-548_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 29 06:26:01 2011] fullrun_ccd7_acisf02040_pi14-548_cl_pass0_tfrozen_src27.ximg exists
[Sat Oct 29 06:26:01 2011] fullrun_ccd7_acisf02040_pi14-548_cl_pass0_tfrozen_src27_1.ximg exists
[Sat Oct 29 06:26:01 2011] Fit fullrun_ccd7_acisf02040_pi14-548_cl_pass0_tfrozen_src27 appears to have run properly
[Sat Oct 29 06:26:21 2011] Spatial fit model total counts = 53.000000, observed total counts = 53.000000
[Sat Oct 29 06:26:21 2011] Offset between fit and detection position for source 33 = 0.784396 pixels
[Sat Oct 29 06:26:21 2011] 50.271800 total counts/ 23.979300 bgd. counts: snr = 5.369250
Spatial fit parameters:
  Offset between fit and detection position for source 33 = 0.784396 pixels
  Position = (713.8, 591.7) = 10 5 15.15 -7 42 52.8
  Extent = 0.4 (0.3-0.6)", rotation angle = 0
  Source counts = 26.3 +/- 7.1
  Background counts = 24.0
  Rate = 0.0007 +/- 0.0002
[Sat Oct 29 06:26:21 2011] Vigneting correction estimate = 1.000000
[Sat Oct 29 06:26:21 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 29 06:26:21 2011] Assessing source extent using major axis lower bound
[Sat Oct 29 06:26:21 2011] Source does appear to be extended
[Sat Oct 29 06:26:21 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 29 06:26:45 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct 29 06:26:45 2011] Initial guess for spatial extent in simple fitting = 0.42"
[Sat Oct 29 06:26:45 2011] source mask rpix=0.9, npix_max = 7, mask sum = 9, frac = 1.213
[Sat Oct 29 06:26:45 2011] Giving source the simple spatial ID 27 for pass 1, mean size = 0.42"
[Sat Oct 29 06:26:50 2011] fullrun_ccd7_acisf02040_pi14-548_cl_pass1_src27.ximg exists
[Sat Oct 29 06:26:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf02040_pi14-548_cl_pass1_src27.csv
[Sat Oct 29 06:26:50 2011] fullrun_ccd7_acisf02040_pi14-548_cl_pass1_src27_1.ximg exists
[Sat Oct 29 06:26:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf02040_pi14-548_cl_pass1_src27.csv
[Sat Oct 29 06:26:50 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf02040_pi14-548_cl_pass1_src27_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf02040_pi14-548_cl_pass1_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 29 06:26:55 2011] fullrun_ccd7_acisf02040_pi14-548_cl_pass1_tfrozen_src27.ximg exists
[Sat Oct 29 06:26:55 2011] fullrun_ccd7_acisf02040_pi14-548_cl_pass1_tfrozen_src27_1.ximg exists
[Sat Oct 29 06:26:55 2011] Fit fullrun_ccd7_acisf02040_pi14-548_cl_pass1_tfrozen_src27 appears to have run properly
[Sat Oct 29 06:27:12 2011] Spatial fit model total counts = 52.996500, observed total counts = 53.000000
[Sat Oct 29 06:27:12 2011] Offset between fit and detection position for source 33 = 0.010063 pixels
[Sat Oct 29 06:27:12 2011] 44.730100 total counts/ 18.016300 bgd. counts: snr = 6.293654
Spatial fit parameters:
  Offset between fit and detection position for source 33 = 0.010063 pixels
  Position = (713.8, 591.7) = 10 5 15.15 -7 42 52.8
  Extent = 0.4 (0.3-0.6)", rotation angle = 0
  Source counts = 26.7 +/- 6.7
  Background counts = 18.0
  Rate = 0.0007 +/- 0.0002
[Sat Oct 29 06:27:12 2011] Vigneting correction estimate = 1.000000
[Sat Oct 29 06:27:12 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 29 06:27:12 2011] Assessing source extent using major axis lower bound
[Sat Oct 29 06:27:12 2011] Source does appear to be extended
[Sat Oct 29 06:27:12 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 29 06:29:11 2011] Not overwriting source region fullrun_ccd7_acisf02040_pi14-548_pass1_cl_src33_src.reg
[Sat Oct 29 06:29:11 2011] Extracting stamp from image fullrun_ccd7_acisf02040_pi14-548_cl_sm2.00.img.gz, (694, 572) - (733, 611)
[Sat Oct 29 06:29:11 2011] Writing fullrun_ccd7_acisf02040_pi14-548_pass1_cl_src33.gif
[Sat Oct 29 06:30:27 2011] ../../acisf02040/products/events/fullrun_ccd7_acisf02040_pi14-548_pass1_cl_src33_src.evt and ../../acisf02040/products/events/fullrun_ccd7_acisf02040_pi14-548_pass1_cl_src33_bgd.evt exist, delete to re-create
[Sat Oct 29 06:30:27 2011] Size of ../../acisf02040/products/events/fullrun_ccd7_acisf02040_pi14-548_pass1_cl_src33_src.evt.gz[events] = 30 counts
[Sat Oct 29 06:30:27 2011] Mean chipx,y = (410.47, 482.83)
[Sat Oct 29 06:30:27 2011] Mean tdetx,y = (4327.47, 2184.83)
[Sat Oct 29 06:30:27 2011] chipx,y range = (396.00-429.00, 467.00-500.00)
[Sat Oct 29 06:30:27 2011] Size of ../../acisf02040/products/events/fullrun_ccd7_acisf02040_pi14-548_pass1_cl_src33_bgd.evt.gz[events] = 45 counts
[Sat Oct 29 06:30:27 2011] ../../acisf02040/products/images/fullrun_ccd7_acisf02040_pi14-548_pass1_cl_src33_src.img and ../../acisf02040/products/images/fullrun_ccd7_acisf02040_pi14-548_pass1_cl_src33_bgd.img exist, delete to re-create
[Sat Oct 29 06:30:27 2011] ../../acisf02040/products/spectra/fullrun_ccd7_acisf02040_pi14-548_pass1_cl_src33_src.pi and ../../acisf02040/products/spectra/fullrun_ccd7_acisf02040_pi14-548_pass1_cl_src33_bgd.pi exist, delete to re-create
[Sat Oct 29 06:30:27 2011] Not generating rmf since there are only 26 counts
[Sat Oct 29 06:30:30 2011] ../../acisf02040/products/lightcurves/fullrun_ccd7_acisf02040_pi14-548_pass1_cl_src33_src.lc and ../../acisf02040/products/lightcurves/fullrun_ccd7_acisf02040_pi14-548_pass1_cl_src33_bgd.lc exist, delete to re-create
[Sat Oct 29 06:32:57 2011] 241.245
[Sat Oct 29 06:33:04 2011] Updating aperture counts using extracted products
[Sat Oct 29 06:33:04 2011] Error reading totcts from fullrun_ccd7_acisf02040_pi14-548_pass1_cl_src33_src.pi.gz
[Sat Oct 29 06:33:05 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 29 06:33:05 2011] Using photon index=1.80, rate=0.000722, arf fullrun_ccd7_acisf02040_pi14-548_pass1_cl_src33.arf
[Sat Oct 29 06:33:05 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct 29 06:33:05 2011] Updating source flux to 4.5e-15
[Sat Oct 29 06:33:27 2011] Source 33 has fewer than 100.000000 counts, skipping spectral fitting