[Sat Oct 29 06:25:01 2011] Detection parameters:
  Position = (727.5, 548.9) = 10 5 14.68 -7 43 13.6
  Extent = 0.5" x 0.5", rotation angle = 132 degrees
  Source counts = 31.0 +/- 6.0
  Background counts = 5.0
  Rate = 0.0008 +/- 0.0002

[Sat Oct 29 06:25:05 2011] Off-axis axis estimate = 1.32'
[Sat Oct 29 06:25:58 2011] Using EEF radius (= 0.39 ")to estimate initial spatial extent for simple fitting
[Sat Oct 29 06:25:58 2011] Initial guess for spatial extent in simple fitting = 0.39"
[Sat Oct 29 06:25:58 2011] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.912
[Sat Oct 29 06:25:58 2011] Giving source the simple spatial ID 26 for pass 0, mean size = 0.39"
[Sat Oct 29 06:25:59 2011] fullrun_ccd7_acisf02040_pi14-548_cl_pass0_src26.ximg exists
[Sat Oct 29 06:25:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf02040_pi14-548_cl_pass0_src26.csv
[Sat Oct 29 06:25:59 2011] fullrun_ccd7_acisf02040_pi14-548_cl_pass0_src26_1.ximg exists
[Sat Oct 29 06:25:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf02040_pi14-548_cl_pass0_src26.csv
[Sat Oct 29 06:25:59 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf02040_pi14-548_cl_pass0_src26_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf02040_pi14-548_cl_pass0_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 29 06:26:01 2011] fullrun_ccd7_acisf02040_pi14-548_cl_pass0_tfrozen_src26.ximg exists
[Sat Oct 29 06:26:01 2011] fullrun_ccd7_acisf02040_pi14-548_cl_pass0_tfrozen_src26_1.ximg exists
[Sat Oct 29 06:26:01 2011] Fit fullrun_ccd7_acisf02040_pi14-548_cl_pass0_tfrozen_src26 appears to have run properly
[Sat Oct 29 06:26:21 2011] Spatial fit model total counts = 51.998400, observed total counts = 52.000000
[Sat Oct 29 06:26:21 2011] Offset between fit and detection position for source 30 = 0.752111 pixels
[Sat Oct 29 06:26:21 2011] 52.827200 total counts/ 22.445200 bgd. counts: snr = 6.412902
Spatial fit parameters:
  Offset between fit and detection position for source 30 = 0.752111 pixels
  Position = (728.0, 549.4) = 10 5 14.68 -7 43 13.6
  Extent = 0.5 (0.4-0.6)", rotation angle = 0
  Source counts = 30.4 +/- 7.3
  Background counts = 22.4
  Rate = 0.0008 +/- 0.0002
[Sat Oct 29 06:26:21 2011] Vigneting correction estimate = 1.000000
[Sat Oct 29 06:26:21 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 29 06:26:21 2011] Assessing source extent using major axis lower bound
[Sat Oct 29 06:26:21 2011] Source does appear to be extended
[Sat Oct 29 06:26:21 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 29 06:26:45 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct 29 06:26:45 2011] Initial guess for spatial extent in simple fitting = 0.46"
[Sat Oct 29 06:26:45 2011] source mask rpix=0.9, npix_max = 8, mask sum = 6, frac = 0.732
[Sat Oct 29 06:26:45 2011] Giving source the simple spatial ID 26 for pass 1, mean size = 0.46"
[Sat Oct 29 06:26:50 2011] fullrun_ccd7_acisf02040_pi14-548_cl_pass1_src26.ximg exists
[Sat Oct 29 06:26:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf02040_pi14-548_cl_pass1_src26.csv
[Sat Oct 29 06:26:50 2011] fullrun_ccd7_acisf02040_pi14-548_cl_pass1_src26_1.ximg exists
[Sat Oct 29 06:26:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf02040_pi14-548_cl_pass1_src26.csv
[Sat Oct 29 06:26:50 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf02040_pi14-548_cl_pass1_src26_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf02040_pi14-548_cl_pass1_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 29 06:26:55 2011] fullrun_ccd7_acisf02040_pi14-548_cl_pass1_tfrozen_src26.ximg exists
[Sat Oct 29 06:26:55 2011] fullrun_ccd7_acisf02040_pi14-548_cl_pass1_tfrozen_src26_1.ximg exists
[Sat Oct 29 06:26:55 2011] Fit fullrun_ccd7_acisf02040_pi14-548_cl_pass1_tfrozen_src26 appears to have run properly
[Sat Oct 29 06:27:12 2011] Spatial fit model total counts = 52.998500, observed total counts = 53.000000
[Sat Oct 29 06:27:12 2011] Offset between fit and detection position for source 30 = 0.003926 pixels
[Sat Oct 29 06:27:12 2011] 53.541300 total counts/ 23.112400 bgd. counts: snr = 6.329417
Spatial fit parameters:
  Offset between fit and detection position for source 30 = 0.003926 pixels
  Position = (728.0, 549.4) = 10 5 14.68 -7 43 13.6
  Extent = 0.5 (0.4-0.6)", rotation angle = 0
  Source counts = 30.4 +/- 7.3
  Background counts = 23.1
  Rate = 0.0008 +/- 0.0002
[Sat Oct 29 06:27:12 2011] Vigneting correction estimate = 1.000000
[Sat Oct 29 06:27:12 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 29 06:27:12 2011] Assessing source extent using major axis lower bound
[Sat Oct 29 06:27:12 2011] Source does appear to be extended
[Sat Oct 29 06:27:12 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 29 06:29:11 2011] Not overwriting source region fullrun_ccd7_acisf02040_pi14-548_pass1_cl_src30_src.reg
[Sat Oct 29 06:29:11 2011] Extracting stamp from image fullrun_ccd7_acisf02040_pi14-548_cl_sm2.00.img.gz, (707, 528) - (749, 570)
[Sat Oct 29 06:29:11 2011] Writing fullrun_ccd7_acisf02040_pi14-548_pass1_cl_src30.gif
[Sat Oct 29 06:30:24 2011] ../../acisf02040/products/events/fullrun_ccd7_acisf02040_pi14-548_pass1_cl_src30_src.evt and ../../acisf02040/products/events/fullrun_ccd7_acisf02040_pi14-548_pass1_cl_src30_bgd.evt exist, delete to re-create
[Sat Oct 29 06:30:24 2011] Size of ../../acisf02040/products/events/fullrun_ccd7_acisf02040_pi14-548_pass1_cl_src30_src.evt.gz[events] = 33 counts
[Sat Oct 29 06:30:24 2011] Mean chipx,y = (368.79, 471.94)
[Sat Oct 29 06:30:24 2011] Mean tdetx,y = (4285.79, 2173.94)
[Sat Oct 29 06:30:24 2011] chipx,y range = (351.00-388.00, 460.00-493.00)
[Sat Oct 29 06:30:24 2011] Size of ../../acisf02040/products/events/fullrun_ccd7_acisf02040_pi14-548_pass1_cl_src30_bgd.evt.gz[events] = 56 counts
[Sat Oct 29 06:30:24 2011] ../../acisf02040/products/images/fullrun_ccd7_acisf02040_pi14-548_pass1_cl_src30_src.img and ../../acisf02040/products/images/fullrun_ccd7_acisf02040_pi14-548_pass1_cl_src30_bgd.img exist, delete to re-create
[Sat Oct 29 06:30:24 2011] ../../acisf02040/products/spectra/fullrun_ccd7_acisf02040_pi14-548_pass1_cl_src30_src.pi and ../../acisf02040/products/spectra/fullrun_ccd7_acisf02040_pi14-548_pass1_cl_src30_bgd.pi exist, delete to re-create
[Sat Oct 29 06:30:24 2011] Not generating rmf since there are only 30 counts
[Sat Oct 29 06:30:27 2011] ../../acisf02040/products/lightcurves/fullrun_ccd7_acisf02040_pi14-548_pass1_cl_src30_src.lc and ../../acisf02040/products/lightcurves/fullrun_ccd7_acisf02040_pi14-548_pass1_cl_src30_bgd.lc exist, delete to re-create
[Sat Oct 29 06:32:57 2011] 244.224
[Sat Oct 29 06:33:04 2011] Updating aperture counts using extracted products
[Sat Oct 29 06:33:04 2011] Error reading totcts from fullrun_ccd7_acisf02040_pi14-548_pass1_cl_src30_src.pi.gz
[Sat Oct 29 06:33:05 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 29 06:33:05 2011] Using photon index=1.80, rate=0.000823, arf fullrun_ccd7_acisf02040_pi14-548_pass1_cl_src30.arf
[Sat Oct 29 06:33:05 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct 29 06:33:05 2011] Updating source flux to 5.1e-15
[Sat Oct 29 06:33:27 2011] Source 30 has fewer than 100.000000 counts, skipping spectral fitting