[Sat Oct 29 06:25:01 2011] Detection parameters:
  Position = (907.0, 364.7) = 10 5 8.74 -7 44 44.2
  Extent = 0.6" x 0.6", rotation angle = 59 degrees
  Source counts = 26.6 +/- 5.4
  Background counts = 2.4
  Rate = 0.0007 +/- 0.0001

[Sat Oct 29 06:25:05 2011] Off-axis axis estimate = 0.79'
[Sat Oct 29 06:25:58 2011] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Sat Oct 29 06:25:58 2011] Initial guess for spatial extent in simple fitting = 0.38"
[Sat Oct 29 06:25:58 2011] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.920
[Sat Oct 29 06:25:58 2011] Giving source the simple spatial ID 28 for pass 0, mean size = 0.38"
[Sat Oct 29 06:25:59 2011] fullrun_ccd7_acisf02040_pi14-548_cl_pass0_src28.ximg exists
[Sat Oct 29 06:25:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf02040_pi14-548_cl_pass0_src28.csv
[Sat Oct 29 06:25:59 2011] fullrun_ccd7_acisf02040_pi14-548_cl_pass0_src28_1.ximg exists
[Sat Oct 29 06:25:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf02040_pi14-548_cl_pass0_src28.csv
[Sat Oct 29 06:25:59 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf02040_pi14-548_cl_pass0_src28_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf02040_pi14-548_cl_pass0_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 29 06:26:01 2011] fullrun_ccd7_acisf02040_pi14-548_cl_pass0_tfrozen_src28.ximg exists
[Sat Oct 29 06:26:01 2011] fullrun_ccd7_acisf02040_pi14-548_cl_pass0_tfrozen_src28_1.ximg exists
[Sat Oct 29 06:26:01 2011] Fit fullrun_ccd7_acisf02040_pi14-548_cl_pass0_tfrozen_src28 appears to have run properly
[Sat Oct 29 06:26:21 2011] Spatial fit model total counts = 31.966400, observed total counts = 32.000000
[Sat Oct 29 06:26:21 2011] Offset between fit and detection position for source 19 = 0.905063 pixels
[Sat Oct 29 06:26:21 2011] 32.587300 total counts/ 10.120800 bgd. counts: snr = 7.062005
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 0.905063 pixels
  Position = (907.1, 365.6) = 10 5 8.75 -7 44 44.0
  Extent = 0.5 (0.4-0.7)", rotation angle = 0
  Source counts = 22.5 +/- 5.7
  Background counts = 10.1
  Rate = 0.0006 +/- 0.0002
[Sat Oct 29 06:26:21 2011] Vigneting correction estimate = 1.000000
[Sat Oct 29 06:26:21 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 29 06:26:21 2011] Assessing source extent using major axis lower bound
[Sat Oct 29 06:26:21 2011] Source does appear to be extended
[Sat Oct 29 06:26:21 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 29 06:26:45 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct 29 06:26:45 2011] Initial guess for spatial extent in simple fitting = 0.47"
[Sat Oct 29 06:26:45 2011] source mask rpix=1.0, npix_max = 8, mask sum = 9, frac = 1.049
[Sat Oct 29 06:26:45 2011] Giving source the simple spatial ID 28 for pass 1, mean size = 0.47"
[Sat Oct 29 06:26:50 2011] fullrun_ccd7_acisf02040_pi14-548_cl_pass1_src28.ximg exists
[Sat Oct 29 06:26:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf02040_pi14-548_cl_pass1_src28.csv
[Sat Oct 29 06:26:50 2011] fullrun_ccd7_acisf02040_pi14-548_cl_pass1_src28_1.ximg exists
[Sat Oct 29 06:26:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf02040_pi14-548_cl_pass1_src28.csv
[Sat Oct 29 06:26:50 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf02040_pi14-548_cl_pass1_src28_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf02040_pi14-548_cl_pass1_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 29 06:26:55 2011] fullrun_ccd7_acisf02040_pi14-548_cl_pass1_tfrozen_src28.ximg exists
[Sat Oct 29 06:26:55 2011] fullrun_ccd7_acisf02040_pi14-548_cl_pass1_tfrozen_src28_1.ximg exists
[Sat Oct 29 06:26:55 2011] Fit fullrun_ccd7_acisf02040_pi14-548_cl_pass1_tfrozen_src28 appears to have run properly
[Sat Oct 29 06:27:12 2011] Spatial fit model total counts = 32.030100, observed total counts = 32.000000
[Sat Oct 29 06:27:12 2011] Offset between fit and detection position for source 19 = 0.004718 pixels
[Sat Oct 29 06:27:12 2011] 32.639700 total counts/ 10.220600 bgd. counts: snr = 7.012615
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 0.004718 pixels
  Position = (907.1, 365.6) = 10 5 8.75 -7 44 44.0
  Extent = 0.5 (0.4-0.7)", rotation angle = 0
  Source counts = 22.4 +/- 5.7
  Background counts = 10.2
  Rate = 0.0006 +/- 0.0002
[Sat Oct 29 06:27:12 2011] Vigneting correction estimate = 1.000000
[Sat Oct 29 06:27:12 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 29 06:27:12 2011] Assessing source extent using major axis lower bound
[Sat Oct 29 06:27:12 2011] Source does appear to be extended
[Sat Oct 29 06:27:12 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 29 06:29:11 2011] Not overwriting source region fullrun_ccd7_acisf02040_pi14-548_pass1_cl_src19_src.reg
[Sat Oct 29 06:29:11 2011] Extracting stamp from image fullrun_ccd7_acisf02040_pi14-548_cl_sm2.00.img.gz, (886, 344) - (929, 387)
[Sat Oct 29 06:29:11 2011] Writing fullrun_ccd7_acisf02040_pi14-548_pass1_cl_src19.gif
[Sat Oct 29 06:30:30 2011] ../../acisf02040/products/events/fullrun_ccd7_acisf02040_pi14-548_pass1_cl_src19_src.evt and ../../acisf02040/products/events/fullrun_ccd7_acisf02040_pi14-548_pass1_cl_src19_bgd.evt exist, delete to re-create
[Sat Oct 29 06:30:30 2011] Size of ../../acisf02040/products/events/fullrun_ccd7_acisf02040_pi14-548_pass1_cl_src19_src.evt.gz[events] = 25 counts
[Sat Oct 29 06:30:30 2011] Mean chipx,y = (123.20, 549.04)
[Sat Oct 29 06:30:30 2011] Mean tdetx,y = (4040.20, 2251.04)
[Sat Oct 29 06:30:30 2011] chipx,y range = (107.00-140.00, 536.00-568.00)
[Sat Oct 29 06:30:30 2011] Size of ../../acisf02040/products/events/fullrun_ccd7_acisf02040_pi14-548_pass1_cl_src19_bgd.evt.gz[events] = 11 counts
[Sat Oct 29 06:30:30 2011] ../../acisf02040/products/images/fullrun_ccd7_acisf02040_pi14-548_pass1_cl_src19_src.img and ../../acisf02040/products/images/fullrun_ccd7_acisf02040_pi14-548_pass1_cl_src19_bgd.img exist, delete to re-create
[Sat Oct 29 06:30:30 2011] ../../acisf02040/products/spectra/fullrun_ccd7_acisf02040_pi14-548_pass1_cl_src19_src.pi and ../../acisf02040/products/spectra/fullrun_ccd7_acisf02040_pi14-548_pass1_cl_src19_bgd.pi exist, delete to re-create
[Sat Oct 29 06:30:30 2011] Not generating rmf since there are only 22 counts
[Sat Oct 29 06:30:32 2011] ../../acisf02040/products/lightcurves/fullrun_ccd7_acisf02040_pi14-548_pass1_cl_src19_src.lc and ../../acisf02040/products/lightcurves/fullrun_ccd7_acisf02040_pi14-548_pass1_cl_src19_bgd.lc exist, delete to re-create
[Sat Oct 29 06:32:57 2011] 241.03
[Sat Oct 29 06:33:04 2011] Updating aperture counts using extracted products
[Sat Oct 29 06:33:04 2011] Error reading totcts from fullrun_ccd7_acisf02040_pi14-548_pass1_cl_src19_src.pi.gz
[Sat Oct 29 06:33:05 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 29 06:33:05 2011] Using photon index=1.80, rate=0.000606, arf fullrun_ccd7_acisf02040_pi14-548_pass1_cl_src19.arf
[Sat Oct 29 06:33:05 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct 29 06:33:05 2011] Updating source flux to 3.8e-15
[Sat Oct 29 06:33:27 2011] Source 19 has fewer than 100.000000 counts, skipping spectral fitting