[Sat Oct 29 06:24:58 2011] Detection parameters:
  Position = (902.4, 1102.3) = 10 4 52.87 -7 46 10.5
  Extent = 0.8" x 0.6", rotation angle = 1 degrees
  Source counts = 16.9 +/- 4.2
  Background counts = 1.1
  Rate = 0.0005 +/- 0.0001

[Sat Oct 29 06:24:59 2011] Off-axis axis estimate = 4.93'
[Sat Oct 29 06:25:57 2011] Using EEF radius (= 1.15 ")to estimate initial spatial extent for simple fitting
[Sat Oct 29 06:25:57 2011] Initial guess for spatial extent in simple fitting = 1.15"
[Sat Oct 29 06:25:57 2011] source mask rpix=2.3, npix_max = 32, mask sum = 30, frac = 0.928
[Sat Oct 29 06:25:57 2011] Giving source the simple spatial ID 10 for pass 0, mean size = 1.15"
[Sat Oct 29 06:25:57 2011] fullrun_ccd6_acisf02040_pi14-548_cl_pass0_src10.ximg exists
[Sat Oct 29 06:25:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf02040_pi14-548_cl_pass0_src10.csv
[Sat Oct 29 06:25:57 2011] fullrun_ccd6_acisf02040_pi14-548_cl_pass0_src10_1.ximg exists
[Sat Oct 29 06:25:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf02040_pi14-548_cl_pass0_src10.csv
[Sat Oct 29 06:25:57 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf02040_pi14-548_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf02040_pi14-548_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 29 06:25:57 2011] fullrun_ccd6_acisf02040_pi14-548_cl_pass0_tfrozen_src10.ximg exists
[Sat Oct 29 06:25:57 2011] fullrun_ccd6_acisf02040_pi14-548_cl_pass0_tfrozen_src10_1.ximg exists
[Sat Oct 29 06:25:57 2011] Fit fullrun_ccd6_acisf02040_pi14-548_cl_pass0_tfrozen_src10 appears to have run properly
[Sat Oct 29 06:26:09 2011] Spatial fit model total counts = 22.711800, observed total counts = 23.000000
[Sat Oct 29 06:26:09 2011] Offset between fit and detection position for source 8 = 0.768411 pixels
[Sat Oct 29 06:26:09 2011] 22.620960 total counts/ 7.610360 bgd. counts: snr = 5.441210
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.768411 pixels
  Position = (902.7, 1103.1) = 10 4 52.88 -7 46 10.4
  Extent = 0.8 (0.6-1.5)", rotation angle = 0
  Source counts = 15.0 +/- 4.8
  Background counts = 7.6
  Rate = 0.0004 +/- 0.0001
[Sat Oct 29 06:26:10 2011] Vigneting correction estimate = 1.000000
[Sat Oct 29 06:26:10 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 29 06:26:10 2011] Assessing source extent using major axis lower bound
[Sat Oct 29 06:26:10 2011] Source does appear to be extended
[Sat Oct 29 06:26:10 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 29 06:26:44 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct 29 06:26:44 2011] Initial guess for spatial extent in simple fitting = 0.83"
[Sat Oct 29 06:26:44 2011] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.039
[Sat Oct 29 06:26:44 2011] Giving source the simple spatial ID 9 for pass 1, mean size = 0.83"
[Sat Oct 29 06:26:45 2011] fullrun_ccd6_acisf02040_pi14-548_cl_pass1_src9.ximg exists
[Sat Oct 29 06:26:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf02040_pi14-548_cl_pass1_src9.csv
[Sat Oct 29 06:26:45 2011] fullrun_ccd6_acisf02040_pi14-548_cl_pass1_src9_1.ximg exists
[Sat Oct 29 06:26:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf02040_pi14-548_cl_pass1_src9.csv
[Sat Oct 29 06:26:45 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf02040_pi14-548_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf02040_pi14-548_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 29 06:26:45 2011] fullrun_ccd6_acisf02040_pi14-548_cl_pass1_tfrozen_src9.ximg exists
[Sat Oct 29 06:26:45 2011] fullrun_ccd6_acisf02040_pi14-548_cl_pass1_tfrozen_src9_1.ximg exists
[Sat Oct 29 06:26:45 2011] Fit fullrun_ccd6_acisf02040_pi14-548_cl_pass1_tfrozen_src9 appears to have run properly
[Sat Oct 29 06:27:04 2011] Spatial fit model total counts = 21.785800, observed total counts = 23.000000
[Sat Oct 29 06:27:04 2011] Offset between fit and detection position for source 8 = 0.077327 pixels
[Sat Oct 29 06:27:04 2011] 21.460230 total counts/ 6.592930 bgd. counts: snr = 5.790191
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.077327 pixels
  Position = (902.7, 1103.1) = 10 4 52.88 -7 46 10.3
  Extent = 0.9 (0.6-1.4)", rotation angle = 0
  Source counts = 14.9 +/- 4.6
  Background counts = 6.6
  Rate = 0.0004 +/- 0.0001
[Sat Oct 29 06:27:04 2011] Vigneting correction estimate = 1.000000
[Sat Oct 29 06:27:04 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 29 06:27:04 2011] Assessing source extent using major axis lower bound
[Sat Oct 29 06:27:04 2011] Source does appear to be extended
[Sat Oct 29 06:27:04 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 29 06:28:18 2011] Not overwriting source region fullrun_ccd6_acisf02040_pi14-548_pass1_cl_src8_src.reg
[Sat Oct 29 06:28:18 2011] Extracting stamp from image fullrun_ccd6_acisf02040_pi14-548_cl_sm2.00.img.gz, (863, 1064) - (942, 1143)
[Sat Oct 29 06:28:18 2011] Writing fullrun_ccd6_acisf02040_pi14-548_pass1_cl_src8.gif
[Sat Oct 29 06:28:44 2011] ../../acisf02040/products/events/fullrun_ccd6_acisf02040_pi14-548_pass1_cl_src8_src.evt and ../../acisf02040/products/events/fullrun_ccd6_acisf02040_pi14-548_pass1_cl_src8_bgd.evt exist, delete to re-create
[Sat Oct 29 06:28:44 2011] Size of ../../acisf02040/products/events/fullrun_ccd6_acisf02040_pi14-548_pass1_cl_src8_src.evt.gz[events] = 20 counts
[Sat Oct 29 06:28:44 2011] Mean chipx,y = (792.10, 900.05)
[Sat Oct 29 06:28:44 2011] Mean tdetx,y = (3667.10, 2602.05)
[Sat Oct 29 06:28:44 2011] chipx,y range = (775.00-810.00, 883.00-919.00)
[Sat Oct 29 06:28:44 2011] Size of ../../acisf02040/products/events/fullrun_ccd6_acisf02040_pi14-548_pass1_cl_src8_bgd.evt.gz[events] = 10 counts
[Sat Oct 29 06:28:44 2011] ../../acisf02040/products/images/fullrun_ccd6_acisf02040_pi14-548_pass1_cl_src8_src.img and ../../acisf02040/products/images/fullrun_ccd6_acisf02040_pi14-548_pass1_cl_src8_bgd.img exist, delete to re-create
[Sat Oct 29 06:28:44 2011] ../../acisf02040/products/spectra/fullrun_ccd6_acisf02040_pi14-548_pass1_cl_src8_src.pi and ../../acisf02040/products/spectra/fullrun_ccd6_acisf02040_pi14-548_pass1_cl_src8_bgd.pi exist, delete to re-create
[Sat Oct 29 06:28:44 2011] Not generating rmf since there are only 14 counts
[Sat Oct 29 06:28:46 2011] ../../acisf02040/products/lightcurves/fullrun_ccd6_acisf02040_pi14-548_pass1_cl_src8_src.lc and ../../acisf02040/products/lightcurves/fullrun_ccd6_acisf02040_pi14-548_pass1_cl_src8_bgd.lc exist, delete to re-create
[Sat Oct 29 06:29:10 2011] 200.127
[Sat Oct 29 06:33:03 2011] Updating aperture counts using extracted products
[Sat Oct 29 06:33:03 2011] Error reading totcts from fullrun_ccd6_acisf02040_pi14-548_pass1_cl_src8_src.pi.gz
[Sat Oct 29 06:33:03 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 29 06:33:03 2011] Using photon index=1.80, rate=0.000402, arf fullrun_ccd6_acisf02040_pi14-548_pass1_cl_src8.arf
[Sat Oct 29 06:33:03 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct 29 06:33:03 2011] Updating source flux to 4.1e-15
[Sat Oct 29 06:33:22 2011] Source 8 has fewer than 100.000000 counts, skipping spectral fitting