[Tue Feb 28 13:53:28 2012] Detection parameters:
  Position = (518.5, 805.6) = 20 58 29.91 -42 36 34.3
  Extent = 0.7" x 0.5", rotation angle = 26 degrees
  Source counts = 3688.8 +/- 61.0
  Background counts = 33.2
  Rate = 0.08 +/- 0.001

[Tue Feb 28 13:53:30 2012] Off-axis axis estimate = 3.11'
[Tue Feb 28 16:07:03 2012] Using EEF radius (= 0.60 ")to estimate initial spatial extent for simple fitting
[Tue Feb 28 16:07:03 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Feb 28 16:07:03 2012] Initial guess for spatial extent in simple fitting = 0.60"
[Tue Feb 28 16:07:03 2012] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.755
[Tue Feb 28 16:07:03 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 0.60"
[Tue Feb 28 16:35:42 2012] fullrun_ccd7_acisf02036_pi14-548_cl_pass0_src1.ximg exists
[Tue Feb 28 16:35:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf02036_pi14-548_cl_pass0_src1.csv
[Tue Feb 28 16:35:42 2012] fullrun_ccd7_acisf02036_pi14-548_cl_pass0_src1_1.ximg exists
[Tue Feb 28 16:35:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf02036_pi14-548_cl_pass0_src1.csv
[Tue Feb 28 16:35:42 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf02036_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf02036_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 28 16:35:42 2012] fullrun_ccd7_acisf02036_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Tue Feb 28 16:35:42 2012] fullrun_ccd7_acisf02036_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Feb 28 16:35:42 2012] Fit fullrun_ccd7_acisf02036_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Feb 28 16:35:53 2012] Spatial fit model total counts = 3581.980000, observed total counts = 3582.000000
[Tue Feb 28 16:35:53 2012] Offset between fit and detection position for source 1 = 0.672036 pixels
[Tue Feb 28 16:35:53 2012] 3588.807000 total counts/ 104.547000 bgd. counts: snr = 340.764832
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.672036 pixels
  Position = (519.0, 806.1) = 20 58 29.91 -42 36 34.3
  Extent = 0.7 (0.7-0.7)", rotation angle = 0
  Source counts = 3484.3 +/- 59.9
  Background counts = 104.5
  Rate = 0.08 +/- 0.001
[Tue Feb 28 16:35:53 2012] Vigneting correction estimate = 1.000000
[Tue Feb 28 16:35:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 28 16:35:53 2012] Assessing source extent using major axis lower bound
[Tue Feb 28 16:35:53 2012] Source does appear to be extended
[Tue Feb 28 16:35:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 28 18:05:26 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Feb 28 18:05:26 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Feb 28 18:05:26 2012] Initial guess for spatial extent in simple fitting = 0.71"
[Tue Feb 28 18:05:26 2012] source mask rpix=1.4, npix_max = 15, mask sum = 16, frac = 1.058
[Tue Feb 28 18:05:26 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 0.71"
[Tue Feb 28 18:31:43 2012] fullrun_ccd7_acisf02036_pi14-548_cl_pass1_src1.ximg exists
[Tue Feb 28 18:31:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf02036_pi14-548_cl_pass1_src1.csv
[Tue Feb 28 18:31:43 2012] fullrun_ccd7_acisf02036_pi14-548_cl_pass1_src1_1.ximg exists
[Tue Feb 28 18:31:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf02036_pi14-548_cl_pass1_src1.csv
[Tue Feb 28 18:31:43 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf02036_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf02036_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 28 18:31:43 2012] fullrun_ccd7_acisf02036_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Tue Feb 28 18:31:43 2012] fullrun_ccd7_acisf02036_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Feb 28 18:31:43 2012] Fit fullrun_ccd7_acisf02036_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Feb 28 18:31:53 2012] Spatial fit model total counts = 3586.960000, observed total counts = 3587.000000
[Tue Feb 28 18:31:53 2012] Offset between fit and detection position for source 1 = 0.008416 pixels
[Tue Feb 28 18:31:53 2012] 3591.467800 total counts/ 97.427800 bgd. counts: snr = 353.986276
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.008416 pixels
  Position = (519.0, 806.1) = 20 58 29.91 -42 36 34.3
  Extent = 0.7 (0.7-0.7)", rotation angle = 0
  Source counts = 3494.0 +/- 59.9
  Background counts = 97.4
  Rate = 0.08 +/- 0.001
[Tue Feb 28 18:31:53 2012] Vigneting correction estimate = 1.000000
[Tue Feb 28 18:31:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 28 18:31:53 2012] Assessing source extent using major axis lower bound
[Tue Feb 28 18:31:53 2012] Source does appear to be extended
[Tue Feb 28 18:31:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 28 18:49:32 2012] Writing source region out to fullrun_ccd7_acisf02036_pi14-548_pass1_cl_src1_src.reg
[Tue Feb 28 18:49:32 2012] Extracting stamp from image fullrun_ccd7_acisf02036_pi14-548_cl_sm2.00.img.gz, (486, 774) - (552, 839)
[Tue Feb 28 18:49:32 2012] Writing fullrun_ccd7_acisf02036_pi14-548_pass1_cl_src1.gif
[Tue Feb 28 18:49:34 2012] Size of ../../acisf02036/products/events/fullrun_ccd7_acisf02036_pi14-548_pass1_cl_src1_src.evt.gz[events] = 3547 counts
[Tue Feb 28 18:49:34 2012] Mean chipx,y = (532.15, 306.22)
[Tue Feb 28 18:49:34 2012] Mean tdetx,y = (4449.15, 2008.22)
[Tue Feb 28 18:49:34 2012] chipx,y range = (511.00-554.00, 285.00-326.00)
[Tue Feb 28 18:49:34 2012] Size of ../../acisf02036/products/events/fullrun_ccd7_acisf02036_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 91 counts
[Tue Feb 28 18:49:35 2012] rmf not found, will run specextract
[Tue Feb 28 18:49:35 2012] arf not found, will run specextract
[Tue Feb 28 18:49:43 2012] ../../acisf02036/products/spectra/fullrun_ccd7_acisf02036_pi14-548_pass1_cl_src1.warf not found
[Tue Feb 28 18:49:43 2012] ../../acisf02036/products/spectra/fullrun_ccd7_acisf02036_pi14-548_pass1_cl_src1.wrmf not found
[Tue Feb 28 18:49:43 2012] Removal of ../../acisf02036/products/spectra/fullrun_ccd7_acisf02036_pi14-548_pass1_cl_src1.soff failed
[Tue Feb 28 18:57:51 2012] Keeping rmf generated by specextract
[Tue Feb 28 18:57:51 2012] 227.611
[Tue Feb 28 18:57:54 2012] Updating aperture counts using extracted products
[Tue Feb 28 18:57:54 2012] Error reading totcts from fullrun_ccd7_acisf02036_pi14-548_pass1_cl_src1_src.pi.gz
[Tue Feb 28 18:57:55 2012] Calculating source flux in energy range 0.30-8.00
[Tue Feb 28 18:57:55 2012] Using photon index=1.80, rate=0.0802, arf fullrun_ccd7_acisf02036_pi14-548_pass1_cl_src1.arf
[Tue Feb 28 18:57:55 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Feb 28 18:57:55 2012] Updating source flux to 5.4e-13
[Tue Feb 28 18:58:18 2012] Reading fit data from acisf02036/analysis//spectral/fullrun_ccd7_acisf02036_pi14-548_pass1_cl_src1_pl.csv
[Tue Feb 28 18:58:18 2012] Spectral fit parameter nH value = 1.23417e+21
[Tue Feb 28 18:58:18 2012] Spectral fit parameter PhoIndex value = 1.87557
[Tue Feb 28 18:58:18 2012] Failed to get F(0.3-8.0) from acisf02036/analysis//spectral/fullrun_ccd7_acisf02036_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Tue Feb 28 18:58:18 2012] Calculating source flux in energy range 0.30-8.00
[Tue Feb 28 18:58:18 2012] Using Nh = 1.2e+21, photon index=1.88, rate=0.0802, arf fullrun_ccd7_acisf02036_pi14-548_pass1_cl_src1.arf
[Tue Feb 28 18:58:18 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Feb 28 18:58:18 2012] Updating source flux to 5.6e-13