[Tue Feb 28 13:53:23 2012] Detection parameters:
  Position = (232.7, 832.4) = 20 57 44.50 -42 39 48.8
  Extent = 1.9" x 0.8", rotation angle = 95 degrees
  Source counts = 10.7 +/- 3.7
  Background counts = 3.3
  Rate = 0.0002 +/- 8e-05

[Tue Feb 28 13:53:24 2012] Off-axis axis estimate = 7.95'
[Tue Feb 28 14:45:39 2012] Using EEF radius (= 2.80 ")to estimate initial spatial extent for simple fitting
[Tue Feb 28 14:45:39 2012] Initial guess for spatial extent in simple fitting = 2.80"
[Tue Feb 28 14:45:39 2012] source mask rpix=5.7, npix_max = 153, mask sum = 156, frac = 1.019
[Tue Feb 28 14:45:39 2012] Giving source the simple spatial ID 12 for pass 0, mean size = 2.80"
[Tue Feb 28 15:33:11 2012] fullrun_ccd3_acisf02036_pi14-548_cl_pass0_src12.ximg exists
[Tue Feb 28 15:33:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf02036_pi14-548_cl_pass0_src12.csv
[Tue Feb 28 15:33:11 2012] fullrun_ccd3_acisf02036_pi14-548_cl_pass0_src12_1.ximg exists
[Tue Feb 28 15:33:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf02036_pi14-548_cl_pass0_src12.csv
[Tue Feb 28 15:33:11 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf02036_pi14-548_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf02036_pi14-548_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 28 15:33:11 2012] fullrun_ccd3_acisf02036_pi14-548_cl_pass0_tfrozen_src12.ximg exists
[Tue Feb 28 15:33:11 2012] fullrun_ccd3_acisf02036_pi14-548_cl_pass0_tfrozen_src12_1.ximg exists
[Tue Feb 28 15:33:11 2012] Fit fullrun_ccd3_acisf02036_pi14-548_cl_pass0_tfrozen_src12 appears to have run properly
[Tue Feb 28 16:35:47 2012] Warning: source 12 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 9 at 32.127340 pixels away
[Tue Feb 28 16:35:47 2012] Vigneting correction estimate = 1.000000
[Tue Feb 28 16:35:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 28 16:35:47 2012] Assessing source extent using major
[Tue Feb 28 16:35:47 2012] Source does appear to be extended
[Tue Feb 28 16:35:47 2012] Computing asymmetry using major and minor axis, asym = 2.35
[Tue Feb 28 16:35:47 2012] Source is asymmetric
[Tue Feb 28 16:48:30 2012] Using EEF radius (= 2.80 ")to estimate initial spatial extent for simple fitting
[Tue Feb 28 16:48:30 2012] Initial guess for spatial extent in simple fitting = 2.80"
[Tue Feb 28 16:48:30 2012] source mask rpix=5.7, npix_max = 153, mask sum = 156, frac = 1.019
[Tue Feb 28 16:48:30 2012] Giving source the simple spatial ID 12 for pass 1, mean size = 2.80"
[Tue Feb 28 17:38:13 2012] fullrun_ccd3_acisf02036_pi14-548_cl_pass1_src12.ximg exists
[Tue Feb 28 17:38:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf02036_pi14-548_cl_pass1_src12.csv
[Tue Feb 28 17:38:13 2012] fullrun_ccd3_acisf02036_pi14-548_cl_pass1_src12_1.ximg exists
[Tue Feb 28 17:38:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf02036_pi14-548_cl_pass1_src12.csv
[Tue Feb 28 17:38:13 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf02036_pi14-548_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf02036_pi14-548_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 28 17:38:13 2012] fullrun_ccd3_acisf02036_pi14-548_cl_pass1_tfrozen_src12.ximg exists
[Tue Feb 28 17:38:13 2012] fullrun_ccd3_acisf02036_pi14-548_cl_pass1_tfrozen_src12_1.ximg exists
[Tue Feb 28 17:38:13 2012] Fit fullrun_ccd3_acisf02036_pi14-548_cl_pass1_tfrozen_src12 appears to have run properly
[Tue Feb 28 18:31:48 2012] Spatial fit model total counts = 29.000100, observed total counts = 29.000000
[Tue Feb 28 18:31:48 2012] Offset between fit and detection position for source 9 = 1.228714 pixels
[Tue Feb 28 18:31:48 2012] 28.642400 total counts/ 14.640500 bgd. counts: snr = 3.659393
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 1.228714 pixels
  Position = (232.8, 833.6) = 20 57 44.52 -42 39 48.4
  Extent = 2.0 (1.0-4.2)", rotation angle = 0
  Source counts = 14.0 +/- 5.4
  Background counts = 14.6
  Rate = 0.0003 +/- 0.0001
[Tue Feb 28 18:31:48 2012] Vigneting correction estimate = 1.000000
[Tue Feb 28 18:31:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 28 18:31:48 2012] Assessing source extent using major axis lower bound
[Tue Feb 28 18:31:48 2012] Source does appear to be extended
[Tue Feb 28 18:31:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 28 18:33:55 2012] Writing source region out to fullrun_ccd3_acisf02036_pi14-548_pass1_cl_src9_src.reg
[Tue Feb 28 18:33:55 2012] Extracting stamp from image fullrun_ccd3_acisf02036_pi14-548_cl_sm2.00.img.gz, (140, 741) - (325, 926)
[Tue Feb 28 18:33:55 2012] Writing fullrun_ccd3_acisf02036_pi14-548_pass1_cl_src9.gif
[Tue Feb 28 18:39:33 2012] Size of ../../acisf02036/products/events/fullrun_ccd3_acisf02036_pi14-548_pass1_cl_src9_src.evt.gz[events] = 25 counts
[Tue Feb 28 18:39:33 2012] Mean chipx,y = (32.44, 592.36)
[Tue Feb 28 18:39:33 2012] Mean tdetx,y = (4539.64, 3093.44)
[Tue Feb 28 18:39:33 2012] chipx,y range = (13.00-49.00, 568.00-615.00)
[Tue Feb 28 18:39:33 2012] Size of ../../acisf02036/products/events/fullrun_ccd3_acisf02036_pi14-548_pass1_cl_src9_bgd.evt.gz[events] = 88 counts
[Tue Feb 28 18:39:34 2012] Not generating rmf since there are only 14 counts
[Tue Feb 28 18:39:34 2012] arf not found, will run specextract
[Tue Feb 28 18:39:58 2012] ../../acisf02036/products/spectra/fullrun_ccd3_acisf02036_pi14-548_pass1_cl_src9.warf not found
[Tue Feb 28 18:39:58 2012] ../../acisf02036/products/spectra/fullrun_ccd3_acisf02036_pi14-548_pass1_cl_src9.wrmf not found
[Tue Feb 28 18:39:58 2012] Removal of ../../acisf02036/products/spectra/fullrun_ccd3_acisf02036_pi14-548_pass1_cl_src9.soff failed
[Tue Feb 28 18:40:06 2012] Spectrum 9 has only 14 counts, deleting rmf
[Tue Feb 28 18:40:06 2012] 178.103
[Tue Feb 28 18:57:54 2012] Updating aperture counts using extracted products
[Tue Feb 28 18:57:54 2012] Error reading totcts from fullrun_ccd3_acisf02036_pi14-548_pass1_cl_src9_src.pi.gz
[Tue Feb 28 18:57:54 2012] Calculating source flux in energy range 0.30-8.00
[Tue Feb 28 18:57:54 2012] Using photon index=1.80, rate=0.000312, arf fullrun_ccd3_acisf02036_pi14-548_pass1_cl_src9.arf
[Tue Feb 28 18:57:54 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Feb 28 18:57:54 2012] Updating source flux to 3.8e-15
[Tue Feb 28 18:58:01 2012] Source 9 has fewer than 100.000000 counts, skipping spectral fitting