[Tue Sep 27 05:02:54 2011] Detection parameters:
  Position = (187.8, 496.9) = 9 36 13.36 61 14 13.0
  Extent = 1.9" x 1.5", rotation angle = 118 degrees
  Source counts = 192.4 +/- 14.5
  Background counts = 16.6
  Rate = 0.004 +/- 0.0003

[Tue Sep 27 05:02:57 2011] Off-axis axis estimate = 6.95'
[Tue Sep 27 05:04:12 2011] Using EEF radius (= 2.15 ")to estimate initial spatial extent for simple fitting
[Tue Sep 27 05:04:12 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Sep 27 05:04:12 2011] Initial guess for spatial extent in simple fitting = 2.15"
[Tue Sep 27 05:04:12 2011] source mask rpix=4.4, npix_max = 95, mask sum = 100, frac = 1.052
[Tue Sep 27 05:04:12 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 2.15"
[Tue Sep 27 05:04:12 2011] fullrun_ccd6_acisf02033_pi14-548_cl_pass0_src1.ximg exists
[Tue Sep 27 05:04:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf02033_pi14-548_cl_pass0_src1.csv
[Tue Sep 27 05:04:12 2011] fullrun_ccd6_acisf02033_pi14-548_cl_pass0_src1_1.ximg exists
[Tue Sep 27 05:04:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf02033_pi14-548_cl_pass0_src1.csv
[Tue Sep 27 05:04:12 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf02033_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf02033_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep 27 05:04:13 2011] fullrun_ccd6_acisf02033_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Tue Sep 27 05:04:13 2011] fullrun_ccd6_acisf02033_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Sep 27 05:04:13 2011] Fit fullrun_ccd6_acisf02033_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Sep 27 05:04:31 2011] Spatial fit model total counts = 214.992000, observed total counts = 215.000000
[Tue Sep 27 05:04:31 2011] Offset between fit and detection position for source 1 = 0.896644 pixels
[Tue Sep 27 05:04:31 2011] 214.845430 total counts/ 3.851430 bgd. counts: snr = 107.512535
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.896644 pixels
  Position = (188.5, 497.3) = 9 36 13.34 61 14 13.0
  Extent = 3.0 (2.7-3.3)", rotation angle = 0
  Source counts = 211.0 +/- 14.7
  Background counts = 3.9
  Rate = 0.004 +/- 0.0003
[Tue Sep 27 05:04:32 2011] Vigneting correction estimate = 1.000000
[Tue Sep 27 05:04:32 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep 27 05:04:32 2011] Assessing source extent using major axis lower bound
[Tue Sep 27 05:04:32 2011] Source does appear to be extended
[Tue Sep 27 05:04:32 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep 27 05:04:59 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Sep 27 05:04:59 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Sep 27 05:04:59 2011] Initial guess for spatial extent in simple fitting = 2.98"
[Tue Sep 27 05:04:59 2011] source mask rpix=6.1, npix_max = 171, mask sum = 169, frac = 0.983
[Tue Sep 27 05:04:59 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 2.98"
[Tue Sep 27 05:04:59 2011] fullrun_ccd6_acisf02033_pi14-548_cl_pass1_src1.ximg exists
[Tue Sep 27 05:04:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf02033_pi14-548_cl_pass1_src1.csv
[Tue Sep 27 05:04:59 2011] fullrun_ccd6_acisf02033_pi14-548_cl_pass1_src1_1.ximg exists
[Tue Sep 27 05:04:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf02033_pi14-548_cl_pass1_src1.csv
[Tue Sep 27 05:04:59 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf02033_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf02033_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep 27 05:05:00 2011] fullrun_ccd6_acisf02033_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Tue Sep 27 05:05:00 2011] fullrun_ccd6_acisf02033_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Sep 27 05:05:00 2011] Fit fullrun_ccd6_acisf02033_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Sep 27 05:05:11 2011] Spatial fit model total counts = 228.000000, observed total counts = 228.000000
[Tue Sep 27 05:05:11 2011] Offset between fit and detection position for source 1 = 0.099746 pixels
[Tue Sep 27 05:05:11 2011] 228.142900 total counts/ 24.428900 bgd. counts: snr = 41.216292
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.099746 pixels
  Position = (188.5, 497.3) = 9 36 13.35 61 14 13.0
  Extent = 2.9 (2.7-3.2)", rotation angle = 0
  Source counts = 203.7 +/- 15.1
  Background counts = 24.4
  Rate = 0.004 +/- 0.0003
[Tue Sep 27 05:05:11 2011] Vigneting correction estimate = 1.000000
[Tue Sep 27 05:05:11 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep 27 05:05:11 2011] Assessing source extent using major axis lower bound
[Tue Sep 27 05:05:11 2011] Source does appear to be extended
[Tue Sep 27 05:05:11 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep 27 05:07:14 2011] Not overwriting source region fullrun_ccd6_acisf02033_pi14-548_pass1_cl_src1_src.reg
[Tue Sep 27 05:07:14 2011] Extracting stamp from image fullrun_ccd6_acisf02033_pi14-548_cl_sm2.00.img.gz, (57, 366) - (320, 628)
[Tue Sep 27 05:07:14 2011] Writing fullrun_ccd6_acisf02033_pi14-548_pass1_cl_src1.gif
[Tue Sep 27 05:07:15 2011] ../../acisf02033/products/events/fullrun_ccd6_acisf02033_pi14-548_pass1_cl_src1_src.evt and ../../acisf02033/products/events/fullrun_ccd6_acisf02033_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Tue Sep 27 05:07:15 2011] Size of ../../acisf02033/products/events/fullrun_ccd6_acisf02033_pi14-548_pass1_cl_src1_src.evt.gz[events] = 219 counts
[Tue Sep 27 05:07:15 2011] Mean chipx,y = (485.05, 170.91)
[Tue Sep 27 05:07:15 2011] Mean tdetx,y = (3360.05, 1872.91)
[Tue Sep 27 05:07:15 2011] chipx,y range = (458.00-515.00, 138.00-200.00)
[Tue Sep 27 05:07:15 2011] Size of ../../acisf02033/products/events/fullrun_ccd6_acisf02033_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 197 counts
[Tue Sep 27 05:07:15 2011] ../../acisf02033/products/images/fullrun_ccd6_acisf02033_pi14-548_pass1_cl_src1_src.img and ../../acisf02033/products/images/fullrun_ccd6_acisf02033_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Tue Sep 27 05:07:15 2011] ../../acisf02033/products/spectra/fullrun_ccd6_acisf02033_pi14-548_pass1_cl_src1_src.pi and ../../acisf02033/products/spectra/fullrun_ccd6_acisf02033_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Tue Sep 27 05:07:21 2011] ../../acisf02033/products/lightcurves/fullrun_ccd6_acisf02033_pi14-548_pass1_cl_src1_src.lc and ../../acisf02033/products/lightcurves/fullrun_ccd6_acisf02033_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Tue Sep 27 05:08:54 2011] Keeping rmf generated by specextract
[Tue Sep 27 05:08:54 2011] 192.361
[Tue Sep 27 05:15:06 2011] Updating aperture counts using extracted products
[Tue Sep 27 05:15:06 2011] Error reading totcts from fullrun_ccd6_acisf02033_pi14-548_pass1_cl_src1_src.pi.gz
[Tue Sep 27 05:15:07 2011] Calculating source flux in energy range 0.30-8.00
[Tue Sep 27 05:15:07 2011] Using photon index=1.80, rate=0.00413, arf fullrun_ccd6_acisf02033_pi14-548_pass1_cl_src1.arf
[Tue Sep 27 05:15:07 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Sep 27 05:15:07 2011] Updating source flux to 4.3e-14
[Tue Sep 27 05:16:00 2011] Reading fit data from acisf02033/analysis//spectral/fullrun_ccd6_acisf02033_pi14-548_pass1_cl_src1_pl.csv
[Tue Sep 27 05:16:00 2011] Spectral fit parameter nH value = 7.01075e+15
[Tue Sep 27 05:16:00 2011] Spectral fit parameter PhoIndex value = 1.87368
[Tue Sep 27 05:16:00 2011] Failed to get F(0.3-8.0) from acisf02033/analysis//spectral/fullrun_ccd6_acisf02033_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Tue Sep 27 05:16:00 2011] Calculating source flux in energy range 0.30-8.00
[Tue Sep 27 05:16:00 2011] Using Nh = 7e+15, photon index=1.87, rate=0.00413, arf fullrun_ccd6_acisf02033_pi14-548_pass1_cl_src1.arf
[Tue Sep 27 05:16:00 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Sep 27 05:16:00 2011] Updating source flux to 4.3e-14