[Tue Sep 27 05:02:50 2011] Detection parameters:
  Position = (260.3, 533.2) = 9 34 35.97 61 16 15.5
  Extent = 1.9" x 1.6", rotation angle = 174 degrees
  Source counts = 196.9 +/- 15.6
  Background counts = 47.1
  Rate = 0.004 +/- 0.0003

[Tue Sep 27 05:02:50 2011] Off-axis axis estimate = 9.97'
[Tue Sep 27 05:04:09 2011] Using EEF radius (= 4.41 ")to estimate initial spatial extent for simple fitting
[Tue Sep 27 05:04:09 2011] Initial guess for spatial extent in simple fitting = 4.41"
[Tue Sep 27 05:04:09 2011] source mask rpix=9.0, npix_max = 357, mask sum = 361, frac = 1.009
[Tue Sep 27 05:04:09 2011] Giving source the simple spatial ID 6 for pass 0, mean size = 4.41"
[Tue Sep 27 05:04:09 2011] fullrun_ccd2_acisf02033_pi14-548_cl_pass0_src6.ximg exists
[Tue Sep 27 05:04:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf02033_pi14-548_cl_pass0_src6.csv
[Tue Sep 27 05:04:09 2011] fullrun_ccd2_acisf02033_pi14-548_cl_pass0_src6_1.ximg exists
[Tue Sep 27 05:04:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf02033_pi14-548_cl_pass0_src6.csv
[Tue Sep 27 05:04:09 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf02033_pi14-548_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf02033_pi14-548_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep 27 05:04:10 2011] fullrun_ccd2_acisf02033_pi14-548_cl_pass0_tfrozen_src6.ximg exists
[Tue Sep 27 05:04:10 2011] fullrun_ccd2_acisf02033_pi14-548_cl_pass0_tfrozen_src6_1.ximg exists
[Tue Sep 27 05:04:10 2011] Fit fullrun_ccd2_acisf02033_pi14-548_cl_pass0_tfrozen_src6 appears to have run properly
[Tue Sep 27 05:04:25 2011] Spatial fit model total counts = 291.777000, observed total counts = 293.000000
[Tue Sep 27 05:04:25 2011] Offset between fit and detection position for source 6 = 1.732802 pixels
[Tue Sep 27 05:04:25 2011] 292.198300 total counts/ 58.910300 bgd. counts: snr = 30.394625
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 1.732802 pixels
  Position = (262.1, 533.3) = 9 34 35.89 61 16 15.3
  Extent = 3.8 (3.1-4.4)", rotation angle = 0
  Source counts = 233.3 +/- 17.1
  Background counts = 58.9
  Rate = 0.005 +/- 0.0003
[Tue Sep 27 05:04:25 2011] Vigneting correction estimate = 1.000000
[Tue Sep 27 05:04:25 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep 27 05:04:25 2011] Assessing source extent using major axis lower bound
[Tue Sep 27 05:04:25 2011] Source does appear to be extended
[Tue Sep 27 05:04:25 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep 27 05:04:57 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Sep 27 05:04:57 2011] Initial guess for spatial extent in simple fitting = 3.85"
[Tue Sep 27 05:04:57 2011] source mask rpix=7.8, npix_max = 276, mask sum = 272, frac = 0.983
[Tue Sep 27 05:04:57 2011] Giving source the simple spatial ID 5 for pass 1, mean size = 3.85"
[Tue Sep 27 05:04:58 2011] fullrun_ccd2_acisf02033_pi14-548_cl_pass1_src5.ximg exists
[Tue Sep 27 05:04:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf02033_pi14-548_cl_pass1_src5.csv
[Tue Sep 27 05:04:58 2011] fullrun_ccd2_acisf02033_pi14-548_cl_pass1_src5_1.ximg exists
[Tue Sep 27 05:04:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf02033_pi14-548_cl_pass1_src5.csv
[Tue Sep 27 05:04:58 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf02033_pi14-548_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf02033_pi14-548_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep 27 05:04:58 2011] fullrun_ccd2_acisf02033_pi14-548_cl_pass1_tfrozen_src5.ximg exists
[Tue Sep 27 05:04:58 2011] fullrun_ccd2_acisf02033_pi14-548_cl_pass1_tfrozen_src5_1.ximg exists
[Tue Sep 27 05:04:58 2011] Fit fullrun_ccd2_acisf02033_pi14-548_cl_pass1_tfrozen_src5 appears to have run properly
[Tue Sep 27 05:05:08 2011] Spatial fit model total counts = 293.139000, observed total counts = 294.000000
[Tue Sep 27 05:05:08 2011] Offset between fit and detection position for source 6 = 0.297248 pixels
[Tue Sep 27 05:05:08 2011] 293.353700 total counts/ 59.611700 bgd. counts: snr = 30.274083
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.297248 pixels
  Position = (262.4, 533.3) = 9 34 35.87 61 16 15.3
  Extent = 3.9 (3.2-4.3)", rotation angle = 0
  Source counts = 233.7 +/- 17.1
  Background counts = 59.6
  Rate = 0.005 +/- 0.0003
[Tue Sep 27 05:05:08 2011] Vigneting correction estimate = 1.000000
[Tue Sep 27 05:05:08 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep 27 05:05:08 2011] Assessing source extent using major axis lower bound
[Tue Sep 27 05:05:08 2011] Source does appear to be extended
[Tue Sep 27 05:05:08 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep 27 05:05:34 2011] Not overwriting source region fullrun_ccd2_acisf02033_pi14-548_pass1_cl_src6_src.reg
[Tue Sep 27 05:05:34 2011] Extracting stamp from image fullrun_ccd2_acisf02033_pi14-548_cl_sm2.00.img.gz, (86, 357) - (439, 710)
[Tue Sep 27 05:05:34 2011] Writing fullrun_ccd2_acisf02033_pi14-548_pass1_cl_src6.gif
[Tue Sep 27 05:06:04 2011] ../../acisf02033/products/events/fullrun_ccd2_acisf02033_pi14-548_pass1_cl_src6_src.evt and ../../acisf02033/products/events/fullrun_ccd2_acisf02033_pi14-548_pass1_cl_src6_bgd.evt exist, delete to re-create
[Tue Sep 27 05:06:04 2011] Size of ../../acisf02033/products/events/fullrun_ccd2_acisf02033_pi14-548_pass1_cl_src6_src.evt.gz[events] = 292 counts
[Tue Sep 27 05:06:04 2011] Mean chipx,y = (781.13, 525.34)
[Tue Sep 27 05:06:04 2011] Mean tdetx,y = (3586.34, 3304.87)
[Tue Sep 27 05:06:04 2011] chipx,y range = (743.00-821.00, 488.00-570.00)
[Tue Sep 27 05:06:04 2011] Size of ../../acisf02033/products/events/fullrun_ccd2_acisf02033_pi14-548_pass1_cl_src6_bgd.evt.gz[events] = 370 counts
[Tue Sep 27 05:06:04 2011] ../../acisf02033/products/images/fullrun_ccd2_acisf02033_pi14-548_pass1_cl_src6_src.img and ../../acisf02033/products/images/fullrun_ccd2_acisf02033_pi14-548_pass1_cl_src6_bgd.img exist, delete to re-create
[Tue Sep 27 05:06:04 2011] ../../acisf02033/products/spectra/fullrun_ccd2_acisf02033_pi14-548_pass1_cl_src6_src.pi and ../../acisf02033/products/spectra/fullrun_ccd2_acisf02033_pi14-548_pass1_cl_src6_bgd.pi exist, delete to re-create
[Tue Sep 27 05:06:11 2011] ../../acisf02033/products/lightcurves/fullrun_ccd2_acisf02033_pi14-548_pass1_cl_src6_src.lc and ../../acisf02033/products/lightcurves/fullrun_ccd2_acisf02033_pi14-548_pass1_cl_src6_bgd.lc exist, delete to re-create
[Tue Sep 27 05:06:12 2011] Keeping rmf generated by specextract
[Tue Sep 27 05:06:12 2011] 167.685
[Tue Sep 27 05:15:06 2011] Updating aperture counts using extracted products
[Tue Sep 27 05:15:06 2011] Error reading totcts from fullrun_ccd2_acisf02033_pi14-548_pass1_cl_src6_src.pi.gz
[Tue Sep 27 05:15:06 2011] Calculating source flux in energy range 0.30-8.00
[Tue Sep 27 05:15:06 2011] Using photon index=1.80, rate=0.00474, arf fullrun_ccd2_acisf02033_pi14-548_pass1_cl_src6.arf
[Tue Sep 27 05:15:06 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Sep 27 05:15:06 2011] Updating source flux to 6e-14