[Fri Sep 30 17:12:52 2011] Detection parameters:
  Position = (973.5, 554.2) = 1 34 10.67 30 42 23.3
  Extent = 1.7" x 1.2", rotation angle = 42 degrees
  Source counts = 137.2 +/- 12.5
  Background counts = 19.8
  Rate = 0.002 +/- 0.0001

[Fri Sep 30 17:12:53 2011] Off-axis axis estimate = 7.59'
[Fri Sep 30 18:54:11 2011] Using EEF radius (= 2.55 ")to estimate initial spatial extent for simple fitting
[Fri Sep 30 18:54:11 2011] Initial guess for spatial extent in simple fitting = 2.55"
[Fri Sep 30 18:54:11 2011] source mask rpix=5.2, npix_max = 129, mask sum = 132, frac = 1.020
[Fri Sep 30 18:54:11 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 2.55"
[Fri Sep 30 19:22:27 2011] fullrun_ccd3_acisf02023_pi14-548_cl_pass0_src3.ximg exists
[Fri Sep 30 19:22:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf02023_pi14-548_cl_pass0_src3.csv
[Fri Sep 30 19:22:27 2011] fullrun_ccd3_acisf02023_pi14-548_cl_pass0_src3_1.ximg exists
[Fri Sep 30 19:22:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf02023_pi14-548_cl_pass0_src3.csv
[Fri Sep 30 19:22:27 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf02023_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf02023_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 19:22:27 2011] fullrun_ccd3_acisf02023_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Fri Sep 30 19:22:27 2011] fullrun_ccd3_acisf02023_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Fri Sep 30 19:22:27 2011] Fit fullrun_ccd3_acisf02023_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Fri Sep 30 20:43:07 2011] Spatial fit model total counts = 158.970000, observed total counts = 160.000000
[Fri Sep 30 20:43:07 2011] Offset between fit and detection position for source 25 = 0.760812 pixels
[Fri Sep 30 20:43:07 2011] 159.015500 total counts/ 37.924500 bgd. counts: snr = 19.663098
Spatial fit parameters:
  Offset between fit and detection position for source 25 = 0.760812 pixels
  Position = (973.7, 554.9) = 1 34 10.69 30 42 23.4
  Extent = 2.2 (1.9-2.7)", rotation angle = 0
  Source counts = 121.1 +/- 12.6
  Background counts = 37.9
  Rate = 0.001 +/- 0.0001
[Fri Sep 30 20:43:07 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 20:43:07 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 20:43:07 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 20:43:07 2011] Source does appear to be extended
[Fri Sep 30 20:43:07 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 22:08:27 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 30 22:08:27 2011] Initial guess for spatial extent in simple fitting = 2.23"
[Fri Sep 30 22:08:27 2011] source mask rpix=4.5, npix_max = 101, mask sum = 100, frac = 0.989
[Fri Sep 30 22:08:27 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 2.23"
[Fri Sep 30 22:31:44 2011] fullrun_ccd3_acisf02023_pi14-548_cl_pass1_src3.ximg exists
[Fri Sep 30 22:31:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf02023_pi14-548_cl_pass1_src3.csv
[Fri Sep 30 22:31:44 2011] fullrun_ccd3_acisf02023_pi14-548_cl_pass1_src3_1.ximg exists
[Fri Sep 30 22:31:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf02023_pi14-548_cl_pass1_src3.csv
[Fri Sep 30 22:31:44 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf02023_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf02023_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 22:31:44 2011] fullrun_ccd3_acisf02023_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Fri Sep 30 22:31:44 2011] fullrun_ccd3_acisf02023_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Fri Sep 30 22:31:44 2011] Fit fullrun_ccd3_acisf02023_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Fri Sep 30 23:36:05 2011] Spatial fit model total counts = 147.929000, observed total counts = 148.000000
[Fri Sep 30 23:36:05 2011] Offset between fit and detection position for source 25 = 0.557240 pixels
[Fri Sep 30 23:36:05 2011] 148.989600 total counts/ 31.977600 bgd. counts: snr = 20.692238
Spatial fit parameters:
  Offset between fit and detection position for source 25 = 0.557240 pixels
  Position = (973.4, 554.4) = 1 34 10.69 30 42 23.2
  Extent = 2.2 (1.8-2.6)", rotation angle = 0
  Source counts = 117.0 +/- 12.2
  Background counts = 32.0
  Rate = 0.001 +/- 0.0001
[Fri Sep 30 23:36:05 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 23:36:05 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 23:36:05 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 23:36:05 2011] Source does appear to be extended
[Fri Sep 30 23:36:05 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 23:57:27 2011] Writing source region out to fullrun_ccd3_acisf02023_pi14-548_pass1_cl_src25_src.reg
[Fri Sep 30 23:57:27 2011] Extracting stamp from image fullrun_ccd3_acisf02023_pi14-548_cl_sm2.00.img.gz, (875, 456) - (1072, 653)
[Fri Sep 30 23:57:27 2011] Writing fullrun_ccd3_acisf02023_pi14-548_pass1_cl_src25.gif
[Fri Sep 30 23:58:02 2011] Size of ../../acisf02023/products/events/fullrun_ccd3_acisf02023_pi14-548_pass1_cl_src25_src.evt.gz[events] = 153 counts
[Fri Sep 30 23:58:02 2011] Mean chipx,y = (169.61, 523.48)
[Fri Sep 30 23:58:02 2011] Mean tdetx,y = (4608.52, 3230.61)
[Fri Sep 30 23:58:02 2011] chipx,y range = (144.00-198.00, 492.00-552.00)
[Fri Sep 30 23:58:02 2011] Size of ../../acisf02023/products/events/fullrun_ccd3_acisf02023_pi14-548_pass1_cl_src25_bgd.evt.gz[events] = 191 counts
[Fri Sep 30 23:58:03 2011] rmf not found, will run specextract
[Fri Sep 30 23:58:03 2011] arf not found, will run specextract
[Fri Sep 30 23:58:05 2011] ../../acisf02023/products/spectra/fullrun_ccd3_acisf02023_pi14-548_pass1_cl_src25_bkg.pi not found
[Fri Sep 30 23:58:05 2011] ../../acisf02023/products/spectra/fullrun_ccd3_acisf02023_pi14-548_pass1_cl_src25.warf not found
[Fri Sep 30 23:58:05 2011] ../../acisf02023/products/spectra/fullrun_ccd3_acisf02023_pi14-548_pass1_cl_src25.wrmf not found
[Fri Sep 30 23:58:05 2011] Removal of ../../acisf02023/products/spectra/fullrun_ccd3_acisf02023_pi14-548_pass1_cl_src25.soff failed
[Fri Sep 30 23:58:05 2011] Failed to rename ../../acisf02023/products/spectra/fullrun_ccd3_acisf02023_pi14-548_pass1_cl_src25_grp.pi to ../../acisf02023/products/spectra/fullrun_ccd3_acisf02023_pi14-548_pass1_cl_src25_src.pi
[Sat Oct  1 00:05:56 2011] No arf file found
[Sat Oct  1 00:11:04 2011] Updating aperture counts using extracted products
[Sat Oct  1 00:11:04 2011] Error reading totcts from fullrun_ccd3_acisf02023_pi14-548_pass1_cl_src25_src.pi
[Sat Oct  1 00:11:05 2011] No arf file for this source, not re-computing flux
[Sat Oct  1 00:11:15 2011] Source 25 has no response, skipping
[Sat Oct  1 00:11:16 2011] acisf02023/analysis//spectral/fullrun_ccd3_acisf02023_pi14-548_pass1_cl_src25_pl.csv not found, spectral fit skipped or did not complete