[Fri Sep 30 17:12:51 2011] Detection parameters:
  Position = (557.6, 844.9) = 1 34 26.54 30 44 46.5
  Extent = 0.5" x 0.5", rotation angle = 55 degrees
  Source counts = 80.8 +/- 9.1
  Background counts = 2.2
  Rate = 0.0009 +/- 0.0001

[Fri Sep 30 17:12:53 2011] Off-axis axis estimate = 3.64'
[Fri Sep 30 18:54:11 2011] Using EEF radius (= 0.73 ")to estimate initial spatial extent for simple fitting
[Fri Sep 30 18:54:11 2011] Initial guess for spatial extent in simple fitting = 0.73"
[Fri Sep 30 18:54:11 2011] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.020
[Fri Sep 30 18:54:11 2011] Giving source the simple spatial ID 5 for pass 0, mean size = 0.73"
[Fri Sep 30 19:22:27 2011] fullrun_ccd3_acisf02023_pi14-548_cl_pass0_src5.ximg exists
[Fri Sep 30 19:22:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf02023_pi14-548_cl_pass0_src5.csv
[Fri Sep 30 19:22:27 2011] fullrun_ccd3_acisf02023_pi14-548_cl_pass0_src5_1.ximg exists
[Fri Sep 30 19:22:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf02023_pi14-548_cl_pass0_src5.csv
[Fri Sep 30 19:22:27 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf02023_pi14-548_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf02023_pi14-548_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 19:22:27 2011] fullrun_ccd3_acisf02023_pi14-548_cl_pass0_tfrozen_src5.ximg exists
[Fri Sep 30 19:22:27 2011] fullrun_ccd3_acisf02023_pi14-548_cl_pass0_tfrozen_src5_1.ximg exists
[Fri Sep 30 19:22:27 2011] Fit fullrun_ccd3_acisf02023_pi14-548_cl_pass0_tfrozen_src5 appears to have run properly
[Fri Sep 30 20:43:07 2011] Spatial fit model total counts = 82.441900, observed total counts = 86.000000
[Fri Sep 30 20:43:07 2011] Offset between fit and detection position for source 13 = 0.665680 pixels
[Fri Sep 30 20:43:07 2011] 84.509780 total counts/ 6.398280 bgd. counts: snr = 30.880431
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.665680 pixels
  Position = (558.0, 845.4) = 1 34 26.54 30 44 46.5
  Extent = 0.6 (0.5-0.7)", rotation angle = 0
  Source counts = 78.1 +/- 9.2
  Background counts = 6.4
  Rate = 0.0009 +/- 0.0001
[Fri Sep 30 20:43:07 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 20:43:07 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 20:43:07 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 20:43:07 2011] Source does appear to be extended
[Fri Sep 30 20:43:07 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 22:08:27 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 30 22:08:27 2011] Initial guess for spatial extent in simple fitting = 0.63"
[Fri Sep 30 22:08:27 2011] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.938
[Fri Sep 30 22:08:27 2011] Giving source the simple spatial ID 5 for pass 1, mean size = 0.63"
[Fri Sep 30 22:31:44 2011] fullrun_ccd3_acisf02023_pi14-548_cl_pass1_src5.ximg exists
[Fri Sep 30 22:31:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf02023_pi14-548_cl_pass1_src5.csv
[Fri Sep 30 22:31:44 2011] fullrun_ccd3_acisf02023_pi14-548_cl_pass1_src5_1.ximg exists
[Fri Sep 30 22:31:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf02023_pi14-548_cl_pass1_src5.csv
[Fri Sep 30 22:31:44 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf02023_pi14-548_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf02023_pi14-548_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 22:31:44 2011] fullrun_ccd3_acisf02023_pi14-548_cl_pass1_tfrozen_src5.ximg exists
[Fri Sep 30 22:31:44 2011] fullrun_ccd3_acisf02023_pi14-548_cl_pass1_tfrozen_src5_1.ximg exists
[Fri Sep 30 22:31:44 2011] Fit fullrun_ccd3_acisf02023_pi14-548_cl_pass1_tfrozen_src5 appears to have run properly
[Fri Sep 30 23:36:05 2011] Spatial fit model total counts = 80.387500, observed total counts = 86.000000
[Fri Sep 30 23:36:05 2011] Offset between fit and detection position for source 13 = 0.008992 pixels
[Fri Sep 30 23:36:05 2011] 82.325120 total counts/ 6.863320 bgd. counts: snr = 28.804480
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.008992 pixels
  Position = (558.0, 845.4) = 1 34 26.54 30 44 46.5
  Extent = 0.6 (0.5-0.7)", rotation angle = 0
  Source counts = 75.5 +/- 9.1
  Background counts = 6.9
  Rate = 0.0008 +/- 0.0001
[Fri Sep 30 23:36:05 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 23:36:05 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 23:36:05 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 23:36:05 2011] Source does appear to be extended
[Fri Sep 30 23:36:05 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 23:57:27 2011] Writing source region out to fullrun_ccd3_acisf02023_pi14-548_pass1_cl_src13_src.reg
[Fri Sep 30 23:57:27 2011] Extracting stamp from image fullrun_ccd3_acisf02023_pi14-548_cl_sm2.00.img.gz, (530, 817) - (587, 874)
[Fri Sep 30 23:57:27 2011] Writing fullrun_ccd3_acisf02023_pi14-548_pass1_cl_src13.gif
[Fri Sep 30 23:58:36 2011] Size of ../../acisf02023/products/events/fullrun_ccd3_acisf02023_pi14-548_pass1_cl_src13_src.evt.gz[events] = 80 counts
[Fri Sep 30 23:58:36 2011] Mean chipx,y = (650.65, 686.79)
[Fri Sep 30 23:58:36 2011] Mean tdetx,y = (4445.21, 3711.65)
[Fri Sep 30 23:58:36 2011] chipx,y range = (634.00-670.00, 669.00-705.00)
[Fri Sep 30 23:58:36 2011] Size of ../../acisf02023/products/events/fullrun_ccd3_acisf02023_pi14-548_pass1_cl_src13_bgd.evt.gz[events] = 21 counts
[Fri Sep 30 23:58:39 2011] Not generating rmf since there are only 75 counts
[Fri Sep 30 23:58:39 2011] arf not found, will run specextract
[Fri Sep 30 23:58:41 2011] ../../acisf02023/products/spectra/fullrun_ccd3_acisf02023_pi14-548_pass1_cl_src13_bkg.pi not found
[Fri Sep 30 23:58:41 2011] ../../acisf02023/products/spectra/fullrun_ccd3_acisf02023_pi14-548_pass1_cl_src13.warf not found
[Fri Sep 30 23:58:41 2011] ../../acisf02023/products/spectra/fullrun_ccd3_acisf02023_pi14-548_pass1_cl_src13.wrmf not found
[Fri Sep 30 23:58:41 2011] Removal of ../../acisf02023/products/spectra/fullrun_ccd3_acisf02023_pi14-548_pass1_cl_src13.soff failed
[Fri Sep 30 23:58:41 2011] Failed to rename ../../acisf02023/products/spectra/fullrun_ccd3_acisf02023_pi14-548_pass1_cl_src13_grp.pi to ../../acisf02023/products/spectra/fullrun_ccd3_acisf02023_pi14-548_pass1_cl_src13_src.pi
[Sat Oct  1 00:05:56 2011] No arf file found
[Sat Oct  1 00:11:04 2011] Updating aperture counts using extracted products
[Sat Oct  1 00:11:04 2011] Error reading totcts from fullrun_ccd3_acisf02023_pi14-548_pass1_cl_src13_src.pi
[Sat Oct  1 00:11:05 2011] No arf file for this source, not re-computing flux
[Sat Oct  1 00:11:15 2011] Source 13 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Oct  1 00:11:16 2011] acisf02023/analysis//spectral/fullrun_ccd3_acisf02023_pi14-548_pass1_cl_src13_pl.csv not found, spectral fit skipped or did not complete