[Fri Sep 30 17:12:38 2011] Detection parameters:
  Position = (774.9, 119.5) = 1 34 45.00 30 49 27.7
  Extent = 0.5" x 0.5", rotation angle = 156 degrees
  Source counts = 244.7 +/- 15.8
  Background counts = 5.3
  Rate = 0.003 +/- 0.0002

[Fri Sep 30 17:12:40 2011] Off-axis axis estimate = 2.68'
[Fri Sep 30 17:17:40 2011] Using EEF radius (= 0.52 ")to estimate initial spatial extent for simple fitting
[Fri Sep 30 17:17:40 2011] Initial guess for spatial extent in simple fitting = 0.52"
[Fri Sep 30 17:17:40 2011] source mask rpix=1.1, npix_max = 9, mask sum = 9, frac = 0.925
[Fri Sep 30 17:17:40 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 0.52"
[Fri Sep 30 17:49:43 2011] fullrun_ccd0_acisf02023_pi14-548_cl_pass0_src3.ximg exists
[Fri Sep 30 17:49:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf02023_pi14-548_cl_pass0_src3.csv
[Fri Sep 30 17:49:43 2011] fullrun_ccd0_acisf02023_pi14-548_cl_pass0_src3_1.ximg exists
[Fri Sep 30 17:49:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf02023_pi14-548_cl_pass0_src3.csv
[Fri Sep 30 17:49:43 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf02023_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf02023_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 17:49:43 2011] fullrun_ccd0_acisf02023_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Fri Sep 30 17:49:43 2011] fullrun_ccd0_acisf02023_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Fri Sep 30 17:49:43 2011] Fit fullrun_ccd0_acisf02023_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Fri Sep 30 20:42:57 2011] Spatial fit model total counts = 255.565000, observed total counts = 253.000000
[Fri Sep 30 20:42:57 2011] Offset between fit and detection position for source 3 = 0.773617 pixels
[Fri Sep 30 20:42:57 2011] 255.919200 total counts/ 21.230200 bgd. counts: snr = 50.934927
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.773617 pixels
  Position = (775.5, 120.0) = 1 34 45.00 30 49 27.7
  Extent = 0.6 (0.5-0.6)", rotation angle = 0
  Source counts = 234.7 +/- 16.0
  Background counts = 21.2
  Rate = 0.003 +/- 0.0002
[Fri Sep 30 20:42:57 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 20:42:57 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 20:42:57 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 20:42:57 2011] Source does appear to be extended
[Fri Sep 30 20:42:57 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 20:43:32 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 30 20:43:32 2011] Initial guess for spatial extent in simple fitting = 0.59"
[Fri Sep 30 20:43:32 2011] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.030
[Fri Sep 30 20:43:32 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 0.59"
[Fri Sep 30 21:13:06 2011] fullrun_ccd0_acisf02023_pi14-548_cl_pass1_src3.ximg exists
[Fri Sep 30 21:13:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf02023_pi14-548_cl_pass1_src3.csv
[Fri Sep 30 21:13:06 2011] fullrun_ccd0_acisf02023_pi14-548_cl_pass1_src3_1.ximg exists
[Fri Sep 30 21:13:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf02023_pi14-548_cl_pass1_src3.csv
[Fri Sep 30 21:13:06 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf02023_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf02023_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 21:13:06 2011] fullrun_ccd0_acisf02023_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Fri Sep 30 21:13:06 2011] fullrun_ccd0_acisf02023_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Fri Sep 30 21:13:06 2011] Fit fullrun_ccd0_acisf02023_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Fri Sep 30 23:35:56 2011] Spatial fit model total counts = 255.143000, observed total counts = 252.000000
[Fri Sep 30 23:35:56 2011] Offset between fit and detection position for source 3 = 0.004824 pixels
[Fri Sep 30 23:35:56 2011] 255.160000 total counts/ 19.697000 bgd. counts: snr = 53.054549
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.004824 pixels
  Position = (775.5, 120.0) = 1 34 45.00 30 49 27.7
  Extent = 0.6 (0.5-0.6)", rotation angle = 0
  Source counts = 235.5 +/- 16.0
  Background counts = 19.7
  Rate = 0.003 +/- 0.0002
[Fri Sep 30 23:35:57 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 23:35:57 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 23:35:57 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 23:35:57 2011] Source does appear to be extended
[Fri Sep 30 23:35:57 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 23:36:46 2011] Writing source region out to fullrun_ccd0_acisf02023_pi14-548_pass1_cl_src3_src.reg
[Fri Sep 30 23:36:46 2011] Extracting stamp from image fullrun_ccd0_acisf02023_pi14-548_cl_sm2.00.img.gz, (748, 93) - (803, 147)
[Fri Sep 30 23:36:46 2011] Writing fullrun_ccd0_acisf02023_pi14-548_pass1_cl_src3.gif
[Fri Sep 30 23:37:41 2011] Size of ../../acisf02023/products/events/fullrun_ccd0_acisf02023_pi14-548_pass1_cl_src3_src.evt.gz[events] = 240 counts
[Fri Sep 30 23:37:41 2011] Mean chipx,y = (790.73, 973.55)
[Fri Sep 30 23:37:41 2011] Mean tdetx,y = (4034.55, 4341.27)
[Fri Sep 30 23:37:41 2011] chipx,y range = (772.00-810.00, 954.00-992.00)
[Fri Sep 30 23:37:41 2011] Size of ../../acisf02023/products/events/fullrun_ccd0_acisf02023_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 24 counts
[Fri Sep 30 23:37:43 2011] rmf not found, will run specextract
[Fri Sep 30 23:37:43 2011] arf not found, will run specextract
[Fri Sep 30 23:37:45 2011] ../../acisf02023/products/spectra/fullrun_ccd0_acisf02023_pi14-548_pass1_cl_src3_bkg.pi not found
[Fri Sep 30 23:37:45 2011] ../../acisf02023/products/spectra/fullrun_ccd0_acisf02023_pi14-548_pass1_cl_src3.warf not found
[Fri Sep 30 23:37:45 2011] ../../acisf02023/products/spectra/fullrun_ccd0_acisf02023_pi14-548_pass1_cl_src3.wrmf not found
[Fri Sep 30 23:37:45 2011] Removal of ../../acisf02023/products/spectra/fullrun_ccd0_acisf02023_pi14-548_pass1_cl_src3.soff failed
[Fri Sep 30 23:37:45 2011] Failed to rename ../../acisf02023/products/spectra/fullrun_ccd0_acisf02023_pi14-548_pass1_cl_src3_grp.pi to ../../acisf02023/products/spectra/fullrun_ccd0_acisf02023_pi14-548_pass1_cl_src3_src.pi
[Fri Sep 30 23:43:02 2011] No arf file found
[Sat Oct  1 00:11:03 2011] Updating aperture counts using extracted products
[Sat Oct  1 00:11:03 2011] Error reading totcts from fullrun_ccd0_acisf02023_pi14-548_pass1_cl_src3_src.pi
[Sat Oct  1 00:11:03 2011] No arf file for this source, not re-computing flux
[Sat Oct  1 00:11:12 2011] Source 3 has no response, skipping
[Sat Oct  1 00:11:13 2011] acisf02023/analysis//spectral/fullrun_ccd0_acisf02023_pi14-548_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete