[Wed Sep 28 14:14:28 2011] Detection parameters:
  Position = (838.5, 624.8) = 9 23 39.17 -23 16 12.7
  Extent = 1.4" x 1.0", rotation angle = 106 degrees
  Source counts = 63.2 +/- 8.4
  Background counts = 6.8
  Rate = 0.002 +/- 0.0003

[Wed Sep 28 14:14:29 2011] Off-axis axis estimate = 6.11'
[Wed Sep 28 14:15:24 2011] Using EEF radius (= 1.69 ")to estimate initial spatial extent for simple fitting
[Wed Sep 28 14:15:24 2011] Initial guess for spatial extent in simple fitting = 1.69"
[Wed Sep 28 14:15:24 2011] source mask rpix=3.4, npix_max = 61, mask sum = 56, frac = 0.906
[Wed Sep 28 14:15:24 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 1.69"
[Wed Sep 28 14:15:26 2011] fullrun_ccd6_acisf02020_pi14-548_cl_pass0_src3.ximg exists
[Wed Sep 28 14:15:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf02020_pi14-548_cl_pass0_src3.csv
[Wed Sep 28 14:15:26 2011] fullrun_ccd6_acisf02020_pi14-548_cl_pass0_src3_1.ximg exists
[Wed Sep 28 14:15:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf02020_pi14-548_cl_pass0_src3.csv
[Wed Sep 28 14:15:26 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf02020_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf02020_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 28 14:15:26 2011] fullrun_ccd6_acisf02020_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Wed Sep 28 14:15:26 2011] fullrun_ccd6_acisf02020_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Wed Sep 28 14:15:26 2011] Fit fullrun_ccd6_acisf02020_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Wed Sep 28 14:15:36 2011] Spatial fit model total counts = 63.998200, observed total counts = 64.000000
[Wed Sep 28 14:15:36 2011] Offset between fit and detection position for source 2 = 3.127528 pixels
[Wed Sep 28 14:15:36 2011] 64.427600 total counts/ 42.544300 bgd. counts: snr = 3.354997
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 3.127528 pixels
  Position = (838.6, 628.0) = 9 23 39.19 -23 16 11.4
  Extent = 1.0 (0.6-1.9)", rotation angle = 0
  Source counts = 21.9 +/- 8.0
  Background counts = 42.5
  Rate = 0.0007 +/- 0.0003
[Wed Sep 28 14:15:36 2011] Vigneting correction estimate = 1.000000
[Wed Sep 28 14:15:36 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 28 14:15:36 2011] Assessing source extent using major axis lower bound
[Wed Sep 28 14:15:36 2011] Source does appear to be extended
[Wed Sep 28 14:15:36 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 28 14:15:59 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Sep 28 14:15:59 2011] Initial guess for spatial extent in simple fitting = 0.95"
[Wed Sep 28 14:15:59 2011] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.843
[Wed Sep 28 14:15:59 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 0.95"
[Wed Sep 28 14:16:00 2011] fullrun_ccd6_acisf02020_pi14-548_cl_pass1_src3.ximg exists
[Wed Sep 28 14:16:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf02020_pi14-548_cl_pass1_src3.csv
[Wed Sep 28 14:16:00 2011] fullrun_ccd6_acisf02020_pi14-548_cl_pass1_src3_1.ximg exists
[Wed Sep 28 14:16:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf02020_pi14-548_cl_pass1_src3.csv
[Wed Sep 28 14:16:00 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf02020_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf02020_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 28 14:16:00 2011] fullrun_ccd6_acisf02020_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Wed Sep 28 14:16:00 2011] fullrun_ccd6_acisf02020_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Wed Sep 28 14:16:00 2011] Fit fullrun_ccd6_acisf02020_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Wed Sep 28 14:16:08 2011] Spatial fit model total counts = 44.806300, observed total counts = 45.000000
[Wed Sep 28 14:16:08 2011] Offset between fit and detection position for source 2 = 0.633006 pixels
[Wed Sep 28 14:16:08 2011] 42.999500 total counts/ 17.536800 bgd. counts: snr = 6.080360
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.633006 pixels
  Position = (838.7, 628.6) = 9 23 39.18 -23 16 11.1
  Extent = 1.1 (0.6-1.9)", rotation angle = 0
  Source counts = 25.5 +/- 6.6
  Background counts = 17.5
  Rate = 0.0009 +/- 0.0002
[Wed Sep 28 14:16:08 2011] Vigneting correction estimate = 1.000000
[Wed Sep 28 14:16:08 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 28 14:16:08 2011] Assessing source extent using major axis lower bound
[Wed Sep 28 14:16:08 2011] Source does appear to be extended
[Wed Sep 28 14:16:08 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 28 14:17:01 2011] Not overwriting source region fullrun_ccd6_acisf02020_pi14-548_pass1_cl_src2_src.reg
[Wed Sep 28 14:17:01 2011] Extracting stamp from image fullrun_ccd6_acisf02020_pi14-548_cl_sm2.00.img.gz, (788, 578) - (889, 679)
[Wed Sep 28 14:17:01 2011] Writing fullrun_ccd6_acisf02020_pi14-548_pass1_cl_src2.gif
[Wed Sep 28 14:17:12 2011] ../../acisf02020/products/events/fullrun_ccd6_acisf02020_pi14-548_pass1_cl_src2_src.evt and ../../acisf02020/products/events/fullrun_ccd6_acisf02020_pi14-548_pass1_cl_src2_bgd.evt exist, delete to re-create
[Wed Sep 28 14:17:13 2011] Size of ../../acisf02020/products/events/fullrun_ccd6_acisf02020_pi14-548_pass1_cl_src2_src.evt.gz[events] = 44 counts
[Wed Sep 28 14:17:13 2011] Mean chipx,y = (529.02, 680.39)
[Wed Sep 28 14:17:13 2011] Mean tdetx,y = (3404.02, 2382.39)
[Wed Sep 28 14:17:13 2011] chipx,y range = (511.00-549.00, 656.00-699.00)
[Wed Sep 28 14:17:13 2011] Size of ../../acisf02020/products/events/fullrun_ccd6_acisf02020_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 21 counts
[Wed Sep 28 14:17:13 2011] ../../acisf02020/products/images/fullrun_ccd6_acisf02020_pi14-548_pass1_cl_src2_src.img and ../../acisf02020/products/images/fullrun_ccd6_acisf02020_pi14-548_pass1_cl_src2_bgd.img exist, delete to re-create
[Wed Sep 28 14:17:13 2011] ../../acisf02020/products/spectra/fullrun_ccd6_acisf02020_pi14-548_pass1_cl_src2_src.pi and ../../acisf02020/products/spectra/fullrun_ccd6_acisf02020_pi14-548_pass1_cl_src2_bgd.pi exist, delete to re-create
[Wed Sep 28 14:17:13 2011] Not generating rmf since there are only 25 counts
[Wed Sep 28 14:17:18 2011] ../../acisf02020/products/lightcurves/fullrun_ccd6_acisf02020_pi14-548_pass1_cl_src2_src.lc and ../../acisf02020/products/lightcurves/fullrun_ccd6_acisf02020_pi14-548_pass1_cl_src2_bgd.lc exist, delete to re-create
[Wed Sep 28 14:18:09 2011] 195.566
[Wed Sep 28 14:19:39 2011] Updating aperture counts using extracted products
[Wed Sep 28 14:19:39 2011] Error reading totcts from fullrun_ccd6_acisf02020_pi14-548_pass1_cl_src2_src.pi.gz
[Wed Sep 28 14:19:39 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 28 14:19:39 2011] Using photon index=1.80, rate=0.000863, arf fullrun_ccd6_acisf02020_pi14-548_pass1_cl_src2.arf
[Wed Sep 28 14:19:39 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Sep 28 14:19:39 2011] Updating source flux to 8.6e-15
[Wed Sep 28 14:19:45 2011] Source 2 has fewer than 100.000000 counts, skipping spectral fitting