[Tue Nov  1 04:19:07 2011] Detection parameters:
  Position = (1006.6, 757.1) = 17 32 51.48 43 47 58.3
  Extent = 0.7" x 0.5", rotation angle = 39 degrees
  Source counts = 45.7 +/- 7.1
  Background counts = 4.3
  Rate = 0.001 +/- 0.0002

[Tue Nov  1 04:19:08 2011] Off-axis axis estimate = 3.44'
[Tue Nov  1 04:20:07 2011] Using EEF radius (= 0.68 ")to estimate initial spatial extent for simple fitting
[Tue Nov  1 04:20:07 2011] Initial guess for spatial extent in simple fitting = 0.68"
[Tue Nov  1 04:20:07 2011] source mask rpix=1.4, npix_max = 14, mask sum = 12, frac = 0.849
[Tue Nov  1 04:20:07 2011] Giving source the simple spatial ID 10 for pass 0, mean size = 0.68"
[Tue Nov  1 04:20:07 2011] fullrun_ccd7_acisf02018_pi14-548_cl_pass0_src10.ximg exists
[Tue Nov  1 04:20:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf02018_pi14-548_cl_pass0_src10.csv
[Tue Nov  1 04:20:08 2011] fullrun_ccd7_acisf02018_pi14-548_cl_pass0_src10_1.ximg exists
[Tue Nov  1 04:20:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf02018_pi14-548_cl_pass0_src10.csv
[Tue Nov  1 04:20:08 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf02018_pi14-548_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf02018_pi14-548_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Nov  1 04:20:08 2011] fullrun_ccd7_acisf02018_pi14-548_cl_pass0_tfrozen_src10.ximg exists
[Tue Nov  1 04:20:08 2011] fullrun_ccd7_acisf02018_pi14-548_cl_pass0_tfrozen_src10_1.ximg exists
[Tue Nov  1 04:20:08 2011] Fit fullrun_ccd7_acisf02018_pi14-548_cl_pass0_tfrozen_src10 appears to have run properly
[Tue Nov  1 04:20:18 2011] Spatial fit model total counts = 56.468500, observed total counts = 56.000000
[Tue Nov  1 04:20:18 2011] Offset between fit and detection position for source 10 = 0.436756 pixels
[Tue Nov  1 04:20:18 2011] 57.232700 total counts/ 11.847200 bgd. counts: snr = 13.185884
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.436756 pixels
  Position = (1006.8, 757.5) = 17 32 51.49 43 47 58.3
  Extent = 0.7 (0.5-0.9)", rotation angle = 0
  Source counts = 45.4 +/- 7.6
  Background counts = 11.8
  Rate = 0.001 +/- 0.0002
[Tue Nov  1 04:20:18 2011] Vigneting correction estimate = 1.000000
[Tue Nov  1 04:20:18 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Nov  1 04:20:18 2011] Assessing source extent using major axis lower bound
[Tue Nov  1 04:20:18 2011] Source does appear to be extended
[Tue Nov  1 04:20:18 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Nov  1 04:20:39 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Nov  1 04:20:39 2011] Initial guess for spatial extent in simple fitting = 0.68"
[Tue Nov  1 04:20:39 2011] source mask rpix=1.4, npix_max = 14, mask sum = 12, frac = 0.840
[Tue Nov  1 04:20:39 2011] Giving source the simple spatial ID 10 for pass 1, mean size = 0.68"
[Tue Nov  1 04:20:40 2011] fullrun_ccd7_acisf02018_pi14-548_cl_pass1_src10.ximg exists
[Tue Nov  1 04:20:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf02018_pi14-548_cl_pass1_src10.csv
[Tue Nov  1 04:20:40 2011] fullrun_ccd7_acisf02018_pi14-548_cl_pass1_src10_1.ximg exists
[Tue Nov  1 04:20:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf02018_pi14-548_cl_pass1_src10.csv
[Tue Nov  1 04:20:40 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf02018_pi14-548_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf02018_pi14-548_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Nov  1 04:20:40 2011] fullrun_ccd7_acisf02018_pi14-548_cl_pass1_tfrozen_src10.ximg exists
[Tue Nov  1 04:20:40 2011] fullrun_ccd7_acisf02018_pi14-548_cl_pass1_tfrozen_src10_1.ximg exists
[Tue Nov  1 04:20:40 2011] Fit fullrun_ccd7_acisf02018_pi14-548_cl_pass1_tfrozen_src10 appears to have run properly
[Tue Nov  1 04:20:49 2011] Spatial fit model total counts = 53.067100, observed total counts = 54.000000
[Tue Nov  1 04:20:49 2011] Offset between fit and detection position for source 10 = 0.125872 pixels
[Tue Nov  1 04:20:49 2011] 53.545310 total counts/ 6.706510 bgd. counts: snr = 18.086622
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.125872 pixels
  Position = (1007.0, 757.5) = 17 32 51.48 43 47 58.3
  Extent = 0.7 (0.5-0.9)", rotation angle = 0
  Source counts = 46.8 +/- 7.3
  Background counts = 6.7
  Rate = 0.002 +/- 0.0002
[Tue Nov  1 04:20:49 2011] Vigneting correction estimate = 1.000000
[Tue Nov  1 04:20:49 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Nov  1 04:20:49 2011] Assessing source extent using major axis lower bound
[Tue Nov  1 04:20:49 2011] Source does appear to be extended
[Tue Nov  1 04:20:49 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Nov  1 04:22:21 2011] Not overwriting source region fullrun_ccd7_acisf02018_pi14-548_pass1_cl_src10_src.reg
[Tue Nov  1 04:22:21 2011] Extracting stamp from image fullrun_ccd7_acisf02018_pi14-548_cl_sm2.00.img.gz, (973, 723) - (1041, 792)
[Tue Nov  1 04:22:21 2011] Writing fullrun_ccd7_acisf02018_pi14-548_pass1_cl_src10.gif
[Tue Nov  1 04:22:52 2011] ../../acisf02018/products/events/fullrun_ccd7_acisf02018_pi14-548_pass1_cl_src10_src.evt and ../../acisf02018/products/events/fullrun_ccd7_acisf02018_pi14-548_pass1_cl_src10_bgd.evt exist, delete to re-create
[Tue Nov  1 04:22:52 2011] Size of ../../acisf02018/products/events/fullrun_ccd7_acisf02018_pi14-548_pass1_cl_src10_src.evt.gz[events] = 51 counts
[Tue Nov  1 04:22:52 2011] Mean chipx,y = (467.88, 857.86)
[Tue Nov  1 04:22:52 2011] Mean tdetx,y = (4384.88, 2559.86)
[Tue Nov  1 04:22:52 2011] chipx,y range = (450.00-485.00, 836.00-876.00)
[Tue Nov  1 04:22:52 2011] Size of ../../acisf02018/products/events/fullrun_ccd7_acisf02018_pi14-548_pass1_cl_src10_bgd.evt.gz[events] = 52 counts
[Tue Nov  1 04:22:52 2011] ../../acisf02018/products/images/fullrun_ccd7_acisf02018_pi14-548_pass1_cl_src10_src.img and ../../acisf02018/products/images/fullrun_ccd7_acisf02018_pi14-548_pass1_cl_src10_bgd.img exist, delete to re-create
[Tue Nov  1 04:22:52 2011] ../../acisf02018/products/spectra/fullrun_ccd7_acisf02018_pi14-548_pass1_cl_src10_src.pi and ../../acisf02018/products/spectra/fullrun_ccd7_acisf02018_pi14-548_pass1_cl_src10_bgd.pi exist, delete to re-create
[Tue Nov  1 04:22:52 2011] Not generating rmf since there are only 46 counts
[Tue Nov  1 04:22:55 2011] ../../acisf02018/products/lightcurves/fullrun_ccd7_acisf02018_pi14-548_pass1_cl_src10_src.lc and ../../acisf02018/products/lightcurves/fullrun_ccd7_acisf02018_pi14-548_pass1_cl_src10_bgd.lc exist, delete to re-create
[Tue Nov  1 04:23:21 2011] 223.562
[Tue Nov  1 04:23:23 2011] Updating aperture counts using extracted products
[Tue Nov  1 04:23:23 2011] Error reading totcts from fullrun_ccd7_acisf02018_pi14-548_pass1_cl_src10_src.pi.gz
[Tue Nov  1 04:23:24 2011] Calculating source flux in energy range 0.30-8.00
[Tue Nov  1 04:23:24 2011] Using photon index=1.80, rate=0.00152, arf fullrun_ccd7_acisf02018_pi14-548_pass1_cl_src10.arf
[Tue Nov  1 04:23:24 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Nov  1 04:23:24 2011] Updating source flux to 1e-14
[Tue Nov  1 04:23:31 2011] Source 10 has fewer than 100.000000 counts, skipping spectral fitting