[Sun Oct 30 04:55:44 2011] Detection parameters:
  Position = (741.9, 720.3) = 0 42 42.58 40 51 12.9
  Extent = 0.8" x 0.5", rotation angle = 177 degrees
  Source counts = 14.5 +/- 4.2
  Background counts = 3.5
  Rate = 0.0003 +/- 9e-05

[Sun Oct 30 04:55:46 2011] Off-axis axis estimate = 1.91'
[Sun Oct 30 04:56:30 2011] Using EEF radius (= 0.42 ")to estimate initial spatial extent for simple fitting
[Sun Oct 30 04:56:30 2011] Initial guess for spatial extent in simple fitting = 0.42"
[Sun Oct 30 04:56:30 2011] source mask rpix=0.9, npix_max = 7, mask sum = 6, frac = 0.815
[Sun Oct 30 04:56:30 2011] Giving source the simple spatial ID 19 for pass 0, mean size = 0.42"
[Sun Oct 30 04:56:31 2011] fullrun_ccd7_acisf02017_pi14-548_cl_pass0_src19.ximg exists
[Sun Oct 30 04:56:31 2011] Warning: total counts is not > 0
[Sun Oct 30 04:56:31 2011] fullrun_ccd7_acisf02017_pi14-548_cl_pass0_src19_1.ximg exists
[Sun Oct 30 04:56:31 2011] Warning: total counts is not > 0
[Sun Oct 30 04:56:31 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf02017_pi14-548_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf02017_pi14-548_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 30 04:56:32 2011] fullrun_ccd7_acisf02017_pi14-548_cl_pass0_tfrozen_src19.ximg exists
[Sun Oct 30 04:56:32 2011] Warning: total counts is not > 0
[Sun Oct 30 04:56:32 2011] fullrun_ccd7_acisf02017_pi14-548_cl_pass0_tfrozen_src19_1.ximg exists
[Sun Oct 30 04:56:32 2011] Warning: total counts is not > 0
[Sun Oct 30 04:56:32 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf02017_pi14-548_cl_pass0_tfrozen_src19_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf02017_pi14-548_cl_pass0_tfrozen_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 30 04:56:44 2011] Source 5 is offset by 2.569790 and -2.678587 pixels which is larger than
2 X fitted extent = 0.428289 x 0.428289, not incorporating fit results
[Sun Oct 30 04:56:44 2011] Vigneting correction estimate = 1.000000
[Sun Oct 30 04:56:44 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 30 04:56:44 2011] Assessing source extent using major
[Sun Oct 30 04:56:44 2011] Source does appear to be extended
[Sun Oct 30 04:56:44 2011] Computing asymmetry using major and minor axis, asym = 1.50
[Sun Oct 30 04:56:44 2011] Source is asymmetric
[Sun Oct 30 04:57:08 2011] Using EEF radius (= 0.42 ")to estimate initial spatial extent for simple fitting
[Sun Oct 30 04:57:08 2011] Initial guess for spatial extent in simple fitting = 0.42"
[Sun Oct 30 04:57:08 2011] source mask rpix=0.9, npix_max = 7, mask sum = 6, frac = 0.815
[Sun Oct 30 04:57:08 2011] Giving source the simple spatial ID 16 for pass 1, mean size = 0.42"
[Sun Oct 30 04:57:09 2011] fullrun_ccd7_acisf02017_pi14-548_cl_pass1_src16.ximg exists
[Sun Oct 30 04:57:09 2011] Warning: total counts is not > 0
[Sun Oct 30 04:57:09 2011] fullrun_ccd7_acisf02017_pi14-548_cl_pass1_src16_1.ximg exists
[Sun Oct 30 04:57:09 2011] Warning: total counts is not > 0
[Sun Oct 30 04:57:09 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf02017_pi14-548_cl_pass1_src16_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf02017_pi14-548_cl_pass1_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 30 04:57:10 2011] fullrun_ccd7_acisf02017_pi14-548_cl_pass1_tfrozen_src16.ximg exists
[Sun Oct 30 04:57:10 2011] Warning: total counts is not > 0
[Sun Oct 30 04:57:10 2011] fullrun_ccd7_acisf02017_pi14-548_cl_pass1_tfrozen_src16_1.ximg exists
[Sun Oct 30 04:57:10 2011] Warning: total counts is not > 0
[Sun Oct 30 04:57:10 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf02017_pi14-548_cl_pass1_tfrozen_src16_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf02017_pi14-548_cl_pass1_tfrozen_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 30 04:57:23 2011] Source 5 is offset by 2.654424 and -3.673171 pixels which is larger than
2 X fitted extent = 0.428289 x 0.428289, not incorporating fit results
[Sun Oct 30 04:57:23 2011] Vigneting correction estimate = 1.000000
[Sun Oct 30 04:57:23 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 30 04:57:23 2011] Assessing source extent using major
[Sun Oct 30 04:57:23 2011] Source does appear to be extended
[Sun Oct 30 04:57:23 2011] Computing asymmetry using major and minor axis, asym = 1.50
[Sun Oct 30 04:57:23 2011] Source is asymmetric
[Sun Oct 30 04:59:13 2011] Not overwriting source region fullrun_ccd7_acisf02017_pi14-548_pass1_cl_src5_src.reg
[Sun Oct 30 04:59:13 2011] Extracting stamp from image fullrun_ccd7_acisf02017_pi14-548_cl_sm2.00.img.gz, (705, 683) - (779, 757)
[Sun Oct 30 04:59:13 2011] Writing fullrun_ccd7_acisf02017_pi14-548_pass1_cl_src5.gif
[Sun Oct 30 04:59:31 2011] ../../acisf02017/products/events/fullrun_ccd7_acisf02017_pi14-548_pass1_cl_src5_src.evt and ../../acisf02017/products/events/fullrun_ccd7_acisf02017_pi14-548_pass1_cl_src5_bgd.evt exist, delete to re-create
[Sun Oct 30 04:59:31 2011] ../../acisf02017/products/events/fullrun_ccd7_acisf02017_pi14-548_pass1_cl_src5_src.evt.gz[events] does not have any counts, not extracting products.
[Sun Oct 30 04:59:31 2011] ../../acisf02017/products/images/fullrun_ccd7_acisf02017_pi14-548_pass1_cl_src5_src.img and ../../acisf02017/products/images/fullrun_ccd7_acisf02017_pi14-548_pass1_cl_src5_bgd.img exist, delete to re-create
[Sun Oct 30 04:59:31 2011] ../../acisf02017/products/lightcurves/fullrun_ccd7_acisf02017_pi14-548_pass1_cl_src5_src.lc and ../../acisf02017/products/lightcurves/fullrun_ccd7_acisf02017_pi14-548_pass1_cl_src5_bgd.lc exist, delete to re-create
[Sun Oct 30 04:59:38 2011] No arf file found
[Sun Oct 30 04:59:43 2011] Updating aperture counts using extracted products
[Sun Oct 30 04:59:43 2011] Error reading totcts from fullrun_ccd7_acisf02017_pi14-548_pass1_cl_src5_src.pi
[Sun Oct 30 04:59:43 2011] No arf file for this source, not re-computing flux
[Sun Oct 30 04:59:50 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Oct 30 04:59:51 2011] acisf02017/analysis//spectral/fullrun_ccd7_acisf02017_pi14-548_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete