[Sun Oct 30 04:55:44 2011] Detection parameters:
  Position = (925.0, 459.0) = 0 42 34.64 40 49 4.3
  Extent = 0.7" x 0.5", rotation angle = 118 degrees
  Source counts = 11.7 +/- 3.7
  Background counts = 2.3
  Rate = 0.0003 +/- 8e-05

[Sun Oct 30 04:55:46 2011] Off-axis axis estimate = 3.99'
[Sun Oct 30 04:56:30 2011] Using EEF radius (= 0.83 ")to estimate initial spatial extent for simple fitting
[Sun Oct 30 04:56:30 2011] Initial guess for spatial extent in simple fitting = 0.83"
[Sun Oct 30 04:56:30 2011] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.842
[Sun Oct 30 04:56:30 2011] Giving source the simple spatial ID 22 for pass 0, mean size = 0.83"
[Sun Oct 30 04:56:31 2011] fullrun_ccd7_acisf02017_pi14-548_cl_pass0_src22.ximg exists
[Sun Oct 30 04:56:31 2011] Warning: total counts is not > 0
[Sun Oct 30 04:56:31 2011] fullrun_ccd7_acisf02017_pi14-548_cl_pass0_src22_1.ximg exists
[Sun Oct 30 04:56:31 2011] Warning: total counts is not > 0
[Sun Oct 30 04:56:31 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf02017_pi14-548_cl_pass0_src22_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf02017_pi14-548_cl_pass0_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 30 04:56:32 2011] fullrun_ccd7_acisf02017_pi14-548_cl_pass0_tfrozen_src22.ximg exists
[Sun Oct 30 04:56:32 2011] Warning: total counts is not > 0
[Sun Oct 30 04:56:32 2011] fullrun_ccd7_acisf02017_pi14-548_cl_pass0_tfrozen_src22_1.ximg exists
[Sun Oct 30 04:56:32 2011] Warning: total counts is not > 0
[Sun Oct 30 04:56:32 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf02017_pi14-548_cl_pass0_tfrozen_src22_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf02017_pi14-548_cl_pass0_tfrozen_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 30 04:56:44 2011] Source 3 is offset by 6.719289 and -2.811815 pixels which is larger than
2 X fitted extent = 0.839911 x 0.839911, not incorporating fit results
[Sun Oct 30 04:56:44 2011] Vigneting correction estimate = 1.000000
[Sun Oct 30 04:56:44 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 30 04:56:44 2011] Assessing source extent using major
[Sun Oct 30 04:56:44 2011] Source does appear to be extended
[Sun Oct 30 04:56:44 2011] Computing asymmetry using major and minor axis, asym = 1.49
[Sun Oct 30 04:57:08 2011] Using EEF radius (= 0.83 ")to estimate initial spatial extent for simple fitting
[Sun Oct 30 04:57:08 2011] Initial guess for spatial extent in simple fitting = 0.83"
[Sun Oct 30 04:57:08 2011] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.842
[Sun Oct 30 04:57:08 2011] Giving source the simple spatial ID 19 for pass 1, mean size = 0.83"
[Sun Oct 30 04:57:09 2011] fullrun_ccd7_acisf02017_pi14-548_cl_pass1_src19.ximg exists
[Sun Oct 30 04:57:09 2011] Warning: total counts is not > 0
[Sun Oct 30 04:57:09 2011] fullrun_ccd7_acisf02017_pi14-548_cl_pass1_src19_1.ximg exists
[Sun Oct 30 04:57:09 2011] Warning: total counts is not > 0
[Sun Oct 30 04:57:09 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf02017_pi14-548_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf02017_pi14-548_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 30 04:57:10 2011] fullrun_ccd7_acisf02017_pi14-548_cl_pass1_tfrozen_src19.ximg exists
[Sun Oct 30 04:57:10 2011] Warning: total counts is not > 0
[Sun Oct 30 04:57:10 2011] fullrun_ccd7_acisf02017_pi14-548_cl_pass1_tfrozen_src19_1.ximg exists
[Sun Oct 30 04:57:10 2011] Warning: total counts is not > 0
[Sun Oct 30 04:57:10 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf02017_pi14-548_cl_pass1_tfrozen_src19_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf02017_pi14-548_cl_pass1_tfrozen_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 30 04:57:23 2011] Source 3 is offset by -0.830980 and 4.626260 pixels which is larger than
2 X fitted extent = 0.839911 x 0.839911, not incorporating fit results
[Sun Oct 30 04:57:23 2011] Vigneting correction estimate = 1.000000
[Sun Oct 30 04:57:23 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 30 04:57:23 2011] Assessing source extent using major
[Sun Oct 30 04:57:23 2011] Source does appear to be extended
[Sun Oct 30 04:57:23 2011] Computing asymmetry using major and minor axis, asym = 1.49
[Sun Oct 30 04:59:13 2011] Not overwriting source region fullrun_ccd7_acisf02017_pi14-548_pass1_cl_src3_src.reg
[Sun Oct 30 04:59:13 2011] Extracting stamp from image fullrun_ccd7_acisf02017_pi14-548_cl_sm2.00.img.gz, (892, 426) - (958, 492)
[Sun Oct 30 04:59:13 2011] Writing fullrun_ccd7_acisf02017_pi14-548_pass1_cl_src3.gif
[Sun Oct 30 04:59:32 2011] ../../acisf02017/products/events/fullrun_ccd7_acisf02017_pi14-548_pass1_cl_src3_src.evt and ../../acisf02017/products/events/fullrun_ccd7_acisf02017_pi14-548_pass1_cl_src3_bgd.evt exist, delete to re-create
[Sun Oct 30 04:59:32 2011] ../../acisf02017/products/events/fullrun_ccd7_acisf02017_pi14-548_pass1_cl_src3_src.evt.gz[events] does not have any counts, not extracting products.
[Sun Oct 30 04:59:32 2011] ../../acisf02017/products/images/fullrun_ccd7_acisf02017_pi14-548_pass1_cl_src3_src.img and ../../acisf02017/products/images/fullrun_ccd7_acisf02017_pi14-548_pass1_cl_src3_bgd.img exist, delete to re-create
[Sun Oct 30 04:59:32 2011] ../../acisf02017/products/lightcurves/fullrun_ccd7_acisf02017_pi14-548_pass1_cl_src3_src.lc and ../../acisf02017/products/lightcurves/fullrun_ccd7_acisf02017_pi14-548_pass1_cl_src3_bgd.lc exist, delete to re-create
[Sun Oct 30 04:59:38 2011] No arf file found
[Sun Oct 30 04:59:43 2011] Updating aperture counts using extracted products
[Sun Oct 30 04:59:43 2011] Error reading totcts from fullrun_ccd7_acisf02017_pi14-548_pass1_cl_src3_src.pi
[Sun Oct 30 04:59:43 2011] No arf file for this source, not re-computing flux
[Sun Oct 30 04:59:50 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Oct 30 04:59:51 2011] acisf02017/analysis//spectral/fullrun_ccd7_acisf02017_pi14-548_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete