[Sun Oct 30 04:55:42 2011] Detection parameters:
  Position = (159.0, 453.0) = 0 42 44.36 40 56 29.6
  Extent = 0.8" x 0.5", rotation angle = 125 degrees
  Source counts = 19.5 +/- 4.6
  Background counts = 1.5
  Rate = 0.0004 +/- 0.0001

[Sun Oct 30 04:55:43 2011] Off-axis axis estimate = 3.67'
[Sun Oct 30 04:56:28 2011] Using EEF radius (= 0.74 ")to estimate initial spatial extent for simple fitting
[Sun Oct 30 04:56:28 2011] Initial guess for spatial extent in simple fitting = 0.74"
[Sun Oct 30 04:56:28 2011] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.006
[Sun Oct 30 04:56:28 2011] Giving source the simple spatial ID 13 for pass 0, mean size = 0.74"
[Sun Oct 30 04:56:29 2011] fullrun_ccd6_acisf02017_pi14-548_cl_pass0_src13.ximg exists
[Sun Oct 30 04:56:29 2011] Warning: total counts is not > 0
[Sun Oct 30 04:56:29 2011] fullrun_ccd6_acisf02017_pi14-548_cl_pass0_src13_1.ximg exists
[Sun Oct 30 04:56:29 2011] Warning: total counts is not > 0
[Sun Oct 30 04:56:29 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf02017_pi14-548_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf02017_pi14-548_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 30 04:56:30 2011] fullrun_ccd6_acisf02017_pi14-548_cl_pass0_tfrozen_src13.ximg exists
[Sun Oct 30 04:56:30 2011] Warning: total counts is not > 0
[Sun Oct 30 04:56:30 2011] fullrun_ccd6_acisf02017_pi14-548_cl_pass0_tfrozen_src13_1.ximg exists
[Sun Oct 30 04:56:30 2011] Warning: total counts is not > 0
[Sun Oct 30 04:56:30 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf02017_pi14-548_cl_pass0_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf02017_pi14-548_cl_pass0_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 30 04:56:41 2011] Source 12 is offset by -5.954062 and 5.001914 pixels which is larger than
2 X fitted extent = 1.124134 x 1.124134, not incorporating fit results
[Sun Oct 30 04:56:41 2011] Vigneting correction estimate = 1.000000
[Sun Oct 30 04:56:41 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 30 04:56:41 2011] Assessing source extent using major
[Sun Oct 30 04:56:41 2011] Source does appear to be extended
[Sun Oct 30 04:56:41 2011] Computing asymmetry using major and minor axis, asym = 1.60
[Sun Oct 30 04:56:41 2011] Source is asymmetric
[Sun Oct 30 04:57:06 2011] Using EEF radius (= 0.74 ")to estimate initial spatial extent for simple fitting
[Sun Oct 30 04:57:06 2011] Initial guess for spatial extent in simple fitting = 0.74"
[Sun Oct 30 04:57:06 2011] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.006
[Sun Oct 30 04:57:06 2011] Giving source the simple spatial ID 11 for pass 1, mean size = 0.74"
[Sun Oct 30 04:57:07 2011] fullrun_ccd6_acisf02017_pi14-548_cl_pass1_src11.ximg exists
[Sun Oct 30 04:57:07 2011] Warning: total counts is not > 0
[Sun Oct 30 04:57:07 2011] fullrun_ccd6_acisf02017_pi14-548_cl_pass1_src11_1.ximg exists
[Sun Oct 30 04:57:07 2011] Warning: total counts is not > 0
[Sun Oct 30 04:57:07 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf02017_pi14-548_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf02017_pi14-548_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 30 04:57:08 2011] fullrun_ccd6_acisf02017_pi14-548_cl_pass1_tfrozen_src11.ximg exists
[Sun Oct 30 04:57:08 2011] Warning: total counts is not > 0
[Sun Oct 30 04:57:08 2011] fullrun_ccd6_acisf02017_pi14-548_cl_pass1_tfrozen_src11_1.ximg exists
[Sun Oct 30 04:57:08 2011] Warning: total counts is not > 0
[Sun Oct 30 04:57:08 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf02017_pi14-548_cl_pass1_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf02017_pi14-548_cl_pass1_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 30 04:57:20 2011] Source 12 is offset by 1.792223 and -4.354265 pixels which is larger than
2 X fitted extent = 0.747248 x 0.747248, not incorporating fit results
[Sun Oct 30 04:57:20 2011] Vigneting correction estimate = 1.000000
[Sun Oct 30 04:57:20 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 30 04:57:20 2011] Assessing source extent using major
[Sun Oct 30 04:57:20 2011] Source does appear to be extended
[Sun Oct 30 04:57:20 2011] Computing asymmetry using major and minor axis, asym = 1.60
[Sun Oct 30 04:57:20 2011] Source is asymmetric
[Sun Oct 30 04:58:38 2011] Not overwriting source region fullrun_ccd6_acisf02017_pi14-548_pass1_cl_src12_src.reg
[Sun Oct 30 04:58:38 2011] Extracting stamp from image fullrun_ccd6_acisf02017_pi14-548_cl_sm2.00.img.gz, (122, 416) - (196, 490)
[Sun Oct 30 04:58:38 2011] Writing fullrun_ccd6_acisf02017_pi14-548_pass1_cl_src12.gif
[Sun Oct 30 04:59:04 2011] ../../acisf02017/products/events/fullrun_ccd6_acisf02017_pi14-548_pass1_cl_src12_src.evt and ../../acisf02017/products/events/fullrun_ccd6_acisf02017_pi14-548_pass1_cl_src12_bgd.evt exist, delete to re-create
[Sun Oct 30 04:59:04 2011] ../../acisf02017/products/events/fullrun_ccd6_acisf02017_pi14-548_pass1_cl_src12_src.evt.gz[events] does not have any counts, not extracting products.
[Sun Oct 30 04:59:04 2011] ../../acisf02017/products/images/fullrun_ccd6_acisf02017_pi14-548_pass1_cl_src12_src.img and ../../acisf02017/products/images/fullrun_ccd6_acisf02017_pi14-548_pass1_cl_src12_bgd.img exist, delete to re-create
[Sun Oct 30 04:59:04 2011] ../../acisf02017/products/lightcurves/fullrun_ccd6_acisf02017_pi14-548_pass1_cl_src12_src.lc and ../../acisf02017/products/lightcurves/fullrun_ccd6_acisf02017_pi14-548_pass1_cl_src12_bgd.lc exist, delete to re-create
[Sun Oct 30 04:59:12 2011] No arf file found
[Sun Oct 30 04:59:42 2011] Updating aperture counts using extracted products
[Sun Oct 30 04:59:42 2011] Error reading totcts from fullrun_ccd6_acisf02017_pi14-548_pass1_cl_src12_src.pi
[Sun Oct 30 04:59:43 2011] No arf file for this source, not re-computing flux
[Sun Oct 30 04:59:49 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Oct 30 04:59:50 2011] acisf02017/analysis//spectral/fullrun_ccd6_acisf02017_pi14-548_pass1_cl_src12_pl.csv not found, spectral fit skipped or did not complete