[Wed Oct 26 15:40:20 2011] Detection parameters:
  Position = (666.1, 931.4) = 12 25 28.04 18 14 17.0
  Extent = 0.5" x 0.5", rotation angle = 45 degrees
  Source counts = 13.5 +/- 3.9
  Background counts = 1.5
  Rate = 0.0003 +/- 0.0001

[Wed Oct 26 15:40:21 2011] Off-axis axis estimate = 4.24'
[Wed Oct 26 15:41:15 2011] Using EEF radius (= 0.90 ")to estimate initial spatial extent for simple fitting
[Wed Oct 26 15:41:15 2011] Initial guess for spatial extent in simple fitting = 0.90"
[Wed Oct 26 15:41:15 2011] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.916
[Wed Oct 26 15:41:15 2011] Giving source the simple spatial ID 50 for pass 0, mean size = 0.90"
[Wed Oct 26 15:41:17 2011] fullrun_ccd7_acisf02016_pi14-548_cl_pass0_src50.ximg exists
[Wed Oct 26 15:41:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf02016_pi14-548_cl_pass0_src50.csv
[Wed Oct 26 15:41:17 2011] fullrun_ccd7_acisf02016_pi14-548_cl_pass0_src50_1.ximg exists
[Wed Oct 26 15:41:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf02016_pi14-548_cl_pass0_src50.csv
[Wed Oct 26 15:41:17 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf02016_pi14-548_cl_pass0_src50_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf02016_pi14-548_cl_pass0_src50.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 26 15:41:17 2011] fullrun_ccd7_acisf02016_pi14-548_cl_pass0_tfrozen_src50.ximg exists
[Wed Oct 26 15:41:17 2011] fullrun_ccd7_acisf02016_pi14-548_cl_pass0_tfrozen_src50_1.ximg exists
[Wed Oct 26 15:41:17 2011] Fit fullrun_ccd7_acisf02016_pi14-548_cl_pass0_tfrozen_src50 appears to have run properly
[Wed Oct 26 15:41:32 2011] Spatial fit model total counts = 25.986700, observed total counts = 26.000000
[Wed Oct 26 15:41:32 2011] Offset between fit and detection position for source 66 = 2.808169 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 66 = 2.808169 pixels
  Position = (667.9, 933.5) = 12 25 27.99 18 14 17.8
  Extent = 1.0 (0.8-1.2)", rotation angle = 0
  Source counts = 24.5 +/- 5.0
  Background counts = 0.0
  Rate = 0.0006 +/- 0.0001
[Wed Oct 26 15:41:32 2011] Vigneting correction estimate = 1.000000
[Wed Oct 26 15:41:32 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 26 15:41:32 2011] Assessing source extent using major axis lower bound
[Wed Oct 26 15:41:32 2011] Source does appear to be extended
[Wed Oct 26 15:41:32 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 26 15:41:54 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct 26 15:41:54 2011] Initial guess for spatial extent in simple fitting = 1.03"
[Wed Oct 26 15:41:54 2011] source mask rpix=2.1, npix_max = 26, mask sum = 30, frac = 1.116
[Wed Oct 26 15:41:54 2011] Giving source the simple spatial ID 50 for pass 1, mean size = 1.03"
[Wed Oct 26 15:41:55 2011] fullrun_ccd7_acisf02016_pi14-548_cl_pass1_src50.ximg exists
[Wed Oct 26 15:41:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf02016_pi14-548_cl_pass1_src50.csv
[Wed Oct 26 15:41:55 2011] fullrun_ccd7_acisf02016_pi14-548_cl_pass1_src50_1.ximg exists
[Wed Oct 26 15:41:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf02016_pi14-548_cl_pass1_src50.csv
[Wed Oct 26 15:41:55 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf02016_pi14-548_cl_pass1_src50_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf02016_pi14-548_cl_pass1_src50.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 26 15:41:56 2011] fullrun_ccd7_acisf02016_pi14-548_cl_pass1_tfrozen_src50.ximg exists
[Wed Oct 26 15:41:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf02016_pi14-548_cl_pass1_tfrozen_src50.csv
[Wed Oct 26 15:41:56 2011] fullrun_ccd7_acisf02016_pi14-548_cl_pass1_tfrozen_src50_1.ximg exists
[Wed Oct 26 15:41:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf02016_pi14-548_cl_pass1_tfrozen_src50.csv
[Wed Oct 26 15:41:56 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf02016_pi14-548_cl_pass1_tfrozen_src50_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf02016_pi14-548_cl_pass1_tfrozen_src50.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 26 15:42:10 2011] Spatial fit model total counts = 20.788600, observed total counts = 24.000000
[Wed Oct 26 15:42:10 2011] Offset between fit and detection position for source 66 = 1.115235 pixels
[Wed Oct 26 15:42:10 2011] 22.600331 total counts/ 0.025831 bgd. counts: snr = 140.459155
Spatial fit parameters:
  Offset between fit and detection position for source 66 = 1.115235 pixels
  Position = (667.1, 932.7) = 12 25 28.02 18 14 17.4
  Extent = 1.0 (0.6-1.3)", rotation angle = 0
  Source counts = 22.6 +/- 4.8
  Background counts = 0.0
  Rate = 0.0006 +/- 0.0001
[Wed Oct 26 15:42:10 2011] Vigneting correction estimate = 1.000000
[Wed Oct 26 15:42:10 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 26 15:42:10 2011] Assessing source extent using major axis lower bound
[Wed Oct 26 15:42:10 2011] Source does appear to be extended
[Wed Oct 26 15:42:10 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 26 15:44:11 2011] Not overwriting source region fullrun_ccd7_acisf02016_pi14-548_pass1_cl_src66_src.reg
[Wed Oct 26 15:44:11 2011] Extracting stamp from image fullrun_ccd7_acisf02016_pi14-548_cl_sm2.00.img.gz, (624, 889) - (711, 976)
[Wed Oct 26 15:44:11 2011] Writing fullrun_ccd7_acisf02016_pi14-548_pass1_cl_src66.gif
[Wed Oct 26 15:46:28 2011] ../../acisf02016/products/events/fullrun_ccd7_acisf02016_pi14-548_pass1_cl_src66_src.evt and ../../acisf02016/products/events/fullrun_ccd7_acisf02016_pi14-548_pass1_cl_src66_bgd.evt exist, delete to re-create
[Wed Oct 26 15:46:28 2011] Size of ../../acisf02016/products/events/fullrun_ccd7_acisf02016_pi14-548_pass1_cl_src66_src.evt.gz[events] = 23 counts
[Wed Oct 26 15:46:28 2011] Mean chipx,y = (724.00, 593.78)
[Wed Oct 26 15:46:28 2011] Mean tdetx,y = (4641.00, 2295.78)
[Wed Oct 26 15:46:28 2011] chipx,y range = (710.00-743.00, 578.00-616.00)
[Wed Oct 26 15:46:28 2011] Size of ../../acisf02016/products/events/fullrun_ccd7_acisf02016_pi14-548_pass1_cl_src66_bgd.evt.gz[events] = 63 counts
[Wed Oct 26 15:46:28 2011] ../../acisf02016/products/images/fullrun_ccd7_acisf02016_pi14-548_pass1_cl_src66_src.img and ../../acisf02016/products/images/fullrun_ccd7_acisf02016_pi14-548_pass1_cl_src66_bgd.img exist, delete to re-create
[Wed Oct 26 15:46:28 2011] ../../acisf02016/products/spectra/fullrun_ccd7_acisf02016_pi14-548_pass1_cl_src66_src.pi and ../../acisf02016/products/spectra/fullrun_ccd7_acisf02016_pi14-548_pass1_cl_src66_bgd.pi exist, delete to re-create
[Wed Oct 26 15:46:28 2011] Not generating rmf since there are only 22 counts
[Wed Oct 26 15:46:31 2011] ../../acisf02016/products/lightcurves/fullrun_ccd7_acisf02016_pi14-548_pass1_cl_src66_src.lc and ../../acisf02016/products/lightcurves/fullrun_ccd7_acisf02016_pi14-548_pass1_cl_src66_bgd.lc exist, delete to re-create
[Wed Oct 26 15:47:14 2011] 228.901
[Wed Oct 26 15:47:18 2011] Updating aperture counts using extracted products
[Wed Oct 26 15:47:18 2011] Error reading totcts from fullrun_ccd7_acisf02016_pi14-548_pass1_cl_src66_src.pi.gz
[Wed Oct 26 15:47:19 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct 26 15:47:19 2011] Using photon index=1.80, rate=0.000568, arf fullrun_ccd7_acisf02016_pi14-548_pass1_cl_src66.arf
[Wed Oct 26 15:47:19 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct 26 15:47:19 2011] Updating source flux to 3.6e-15
[Wed Oct 26 15:47:31 2011] Source 66 has fewer than 100.000000 counts, skipping spectral fitting