[Wed Oct 26 15:40:17 2011] Detection parameters:
  Position = (762.9, 614.1) = 12 25 24.70 18 11 40.9
  Extent = 0.5" x 0.5", rotation angle = 53 degrees
  Source counts = 43.5 +/- 7.2
  Background counts = 8.5
  Rate = 0.001 +/- 0.0002

[Wed Oct 26 15:40:21 2011] Off-axis axis estimate = 1.56'
[Wed Oct 26 15:41:15 2011] Using EEF radius (= 0.40 ")to estimate initial spatial extent for simple fitting
[Wed Oct 26 15:41:15 2011] Initial guess for spatial extent in simple fitting = 0.40"
[Wed Oct 26 15:41:15 2011] source mask rpix=0.8, npix_max = 6, mask sum = 4, frac = 0.588
[Wed Oct 26 15:41:15 2011] Giving source the simple spatial ID 19 for pass 0, mean size = 0.40"
[Wed Oct 26 15:41:16 2011] fullrun_ccd7_acisf02016_pi14-548_cl_pass0_src19.ximg exists
[Wed Oct 26 15:41:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf02016_pi14-548_cl_pass0_src19.csv
[Wed Oct 26 15:41:16 2011] fullrun_ccd7_acisf02016_pi14-548_cl_pass0_src19_1.ximg exists
[Wed Oct 26 15:41:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf02016_pi14-548_cl_pass0_src19.csv
[Wed Oct 26 15:41:16 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf02016_pi14-548_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf02016_pi14-548_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 26 15:41:17 2011] fullrun_ccd7_acisf02016_pi14-548_cl_pass0_tfrozen_src19.ximg exists
[Wed Oct 26 15:41:17 2011] fullrun_ccd7_acisf02016_pi14-548_cl_pass0_tfrozen_src19_1.ximg exists
[Wed Oct 26 15:41:17 2011] Fit fullrun_ccd7_acisf02016_pi14-548_cl_pass0_tfrozen_src19 appears to have run properly
[Wed Oct 26 15:41:32 2011] Spatial fit model total counts = 73.999500, observed total counts = 74.000000
[Wed Oct 26 15:41:32 2011] Offset between fit and detection position for source 25 = 0.833353 pixels
[Wed Oct 26 15:41:32 2011] 72.323500 total counts/ 32.576200 bgd. counts: snr = 6.963978
Spatial fit parameters:
  Offset between fit and detection position for source 25 = 0.833353 pixels
  Position = (763.5, 614.7) = 12 25 24.69 18 11 40.9
  Extent = 0.4 (0.3-0.5)", rotation angle = 0
  Source counts = 39.7 +/- 8.5
  Background counts = 32.6
  Rate = 0.001 +/- 0.0002
[Wed Oct 26 15:41:32 2011] Vigneting correction estimate = 1.000000
[Wed Oct 26 15:41:32 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 26 15:41:32 2011] Assessing source extent using major axis lower bound
[Wed Oct 26 15:41:32 2011] Source does appear to be extended
[Wed Oct 26 15:41:32 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 26 15:41:54 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct 26 15:41:54 2011] Initial guess for spatial extent in simple fitting = 0.38"
[Wed Oct 26 15:41:54 2011] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.386
[Wed Oct 26 15:41:54 2011] Giving source the simple spatial ID 19 for pass 1, mean size = 0.38"
[Wed Oct 26 15:41:55 2011] fullrun_ccd7_acisf02016_pi14-548_cl_pass1_src19.ximg exists
[Wed Oct 26 15:41:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf02016_pi14-548_cl_pass1_src19.csv
[Wed Oct 26 15:41:55 2011] fullrun_ccd7_acisf02016_pi14-548_cl_pass1_src19_1.ximg exists
[Wed Oct 26 15:41:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf02016_pi14-548_cl_pass1_src19.csv
[Wed Oct 26 15:41:55 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf02016_pi14-548_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf02016_pi14-548_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 26 15:41:56 2011] fullrun_ccd7_acisf02016_pi14-548_cl_pass1_tfrozen_src19.ximg exists
[Wed Oct 26 15:41:56 2011] fullrun_ccd7_acisf02016_pi14-548_cl_pass1_tfrozen_src19_1.ximg exists
[Wed Oct 26 15:41:56 2011] Fit fullrun_ccd7_acisf02016_pi14-548_cl_pass1_tfrozen_src19 appears to have run properly
[Wed Oct 26 15:42:10 2011] Spatial fit model total counts = 73.999200, observed total counts = 74.000000
[Wed Oct 26 15:42:10 2011] Offset between fit and detection position for source 25 = 0.000210 pixels
[Wed Oct 26 15:42:10 2011] 72.323500 total counts/ 32.568000 bgd. counts: snr = 6.966292
Spatial fit parameters:
  Offset between fit and detection position for source 25 = 0.000210 pixels
  Position = (763.5, 614.7) = 12 25 24.69 18 11 40.9
  Extent = 0.4 (0.3-0.5)", rotation angle = 0
  Source counts = 39.8 +/- 8.5
  Background counts = 32.6
  Rate = 0.001 +/- 0.0002
[Wed Oct 26 15:42:10 2011] Vigneting correction estimate = 1.000000
[Wed Oct 26 15:42:10 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 26 15:42:10 2011] Assessing source extent using major axis lower bound
[Wed Oct 26 15:42:10 2011] Source does appear to be extended
[Wed Oct 26 15:42:10 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 26 15:44:10 2011] Not overwriting source region fullrun_ccd7_acisf02016_pi14-548_pass1_cl_src25_src.reg
[Wed Oct 26 15:44:10 2011] Extracting stamp from image fullrun_ccd7_acisf02016_pi14-548_cl_sm2.00.img.gz, (746, 597) - (781, 632)
[Wed Oct 26 15:44:10 2011] Writing fullrun_ccd7_acisf02016_pi14-548_pass1_cl_src25.gif
[Wed Oct 26 15:45:06 2011] ../../acisf02016/products/events/fullrun_ccd7_acisf02016_pi14-548_pass1_cl_src25_src.evt and ../../acisf02016/products/events/fullrun_ccd7_acisf02016_pi14-548_pass1_cl_src25_bgd.evt exist, delete to re-create
[Wed Oct 26 15:45:06 2011] Size of ../../acisf02016/products/events/fullrun_ccd7_acisf02016_pi14-548_pass1_cl_src25_src.evt.gz[events] = 44 counts
[Wed Oct 26 15:45:06 2011] Mean chipx,y = (406.00, 511.14)
[Wed Oct 26 15:45:06 2011] Mean tdetx,y = (4323.00, 2213.14)
[Wed Oct 26 15:45:06 2011] chipx,y range = (387.00-421.00, 496.00-529.00)
[Wed Oct 26 15:45:06 2011] Size of ../../acisf02016/products/events/fullrun_ccd7_acisf02016_pi14-548_pass1_cl_src25_bgd.evt.gz[events] = 55 counts
[Wed Oct 26 15:45:06 2011] ../../acisf02016/products/images/fullrun_ccd7_acisf02016_pi14-548_pass1_cl_src25_src.img and ../../acisf02016/products/images/fullrun_ccd7_acisf02016_pi14-548_pass1_cl_src25_bgd.img exist, delete to re-create
[Wed Oct 26 15:45:06 2011] ../../acisf02016/products/spectra/fullrun_ccd7_acisf02016_pi14-548_pass1_cl_src25_src.pi and ../../acisf02016/products/spectra/fullrun_ccd7_acisf02016_pi14-548_pass1_cl_src25_bgd.pi exist, delete to re-create
[Wed Oct 26 15:45:06 2011] Not generating rmf since there are only 39 counts
[Wed Oct 26 15:45:08 2011] ../../acisf02016/products/lightcurves/fullrun_ccd7_acisf02016_pi14-548_pass1_cl_src25_src.lc and ../../acisf02016/products/lightcurves/fullrun_ccd7_acisf02016_pi14-548_pass1_cl_src25_bgd.lc exist, delete to re-create
[Wed Oct 26 15:47:13 2011] 241.333
[Wed Oct 26 15:47:18 2011] Updating aperture counts using extracted products
[Wed Oct 26 15:47:18 2011] Error reading totcts from fullrun_ccd7_acisf02016_pi14-548_pass1_cl_src25_src.pi.gz
[Wed Oct 26 15:47:18 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct 26 15:47:18 2011] Using photon index=1.80, rate=0.001, arf fullrun_ccd7_acisf02016_pi14-548_pass1_cl_src25.arf
[Wed Oct 26 15:47:18 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct 26 15:47:18 2011] Updating source flux to 6.1e-15
[Wed Oct 26 15:47:31 2011] Source 25 has fewer than 100.000000 counts, skipping spectral fitting