[Wed Oct 26 15:40:10 2011] Detection parameters:
  Position = (759.3, 1184.5) = 12 25 5.87 18 9 13.0
  Extent = 1.0" x 0.6", rotation angle = 1 degrees
  Source counts = 74.0 +/- 8.7
  Background counts = 2.0
  Rate = 0.002 +/- 0.0002

[Wed Oct 26 15:40:12 2011] Off-axis axis estimate = 3.79'
[Wed Oct 26 15:41:13 2011] Using EEF radius (= 0.77 ")to estimate initial spatial extent for simple fitting
[Wed Oct 26 15:41:13 2011] Initial guess for spatial extent in simple fitting = 0.77"
[Wed Oct 26 15:41:13 2011] source mask rpix=1.6, npix_max = 17, mask sum = 20, frac = 1.171
[Wed Oct 26 15:41:13 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 0.77"
[Wed Oct 26 15:41:14 2011] fullrun_ccd6_acisf02016_pi14-548_cl_pass0_src3.ximg exists
[Wed Oct 26 15:41:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf02016_pi14-548_cl_pass0_src3.csv
[Wed Oct 26 15:41:14 2011] fullrun_ccd6_acisf02016_pi14-548_cl_pass0_src3_1.ximg exists
[Wed Oct 26 15:41:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf02016_pi14-548_cl_pass0_src3.csv
[Wed Oct 26 15:41:14 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf02016_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf02016_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 26 15:41:14 2011] fullrun_ccd6_acisf02016_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Wed Oct 26 15:41:14 2011] fullrun_ccd6_acisf02016_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Wed Oct 26 15:41:14 2011] Fit fullrun_ccd6_acisf02016_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Wed Oct 26 15:41:25 2011] Spatial fit model total counts = 77.011000, observed total counts = 78.000000
[Wed Oct 26 15:41:25 2011] Offset between fit and detection position for source 2 = 0.807445 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.807445 pixels
  Position = (759.9, 1185.0) = 12 25 5.87 18 9 13.0
  Extent = 1.1 (0.9-1.2)", rotation angle = 0
  Source counts = 76.2 +/- 8.7
  Background counts = 0.0
  Rate = 0.002 +/- 0.0002
[Wed Oct 26 15:41:25 2011] Vigneting correction estimate = 1.000000
[Wed Oct 26 15:41:25 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 26 15:41:25 2011] Assessing source extent using major axis lower bound
[Wed Oct 26 15:41:25 2011] Source does appear to be extended
[Wed Oct 26 15:41:25 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 26 15:41:53 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct 26 15:41:53 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Oct 26 15:41:53 2011] Initial guess for spatial extent in simple fitting = 1.11"
[Wed Oct 26 15:41:53 2011] source mask rpix=2.3, npix_max = 30, mask sum = 36, frac = 1.182
[Wed Oct 26 15:41:53 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 1.11"
[Wed Oct 26 15:41:53 2011] fullrun_ccd6_acisf02016_pi14-548_cl_pass1_src3.ximg exists
[Wed Oct 26 15:41:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf02016_pi14-548_cl_pass1_src3.csv
[Wed Oct 26 15:41:53 2011] fullrun_ccd6_acisf02016_pi14-548_cl_pass1_src3_1.ximg exists
[Wed Oct 26 15:41:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf02016_pi14-548_cl_pass1_src3.csv
[Wed Oct 26 15:41:53 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf02016_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf02016_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 26 15:41:53 2011] fullrun_ccd6_acisf02016_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Wed Oct 26 15:41:53 2011] fullrun_ccd6_acisf02016_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Wed Oct 26 15:41:53 2011] Fit fullrun_ccd6_acisf02016_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Wed Oct 26 15:42:03 2011] Spatial fit model total counts = 75.442900, observed total counts = 77.000000
[Wed Oct 26 15:42:03 2011] Offset between fit and detection position for source 2 = 0.049494 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.049494 pixels
  Position = (759.8, 1185.0) = 12 25 5.87 18 9 13.0
  Extent = 1.1 (0.9-1.2)", rotation angle = 0
  Source counts = 74.9 +/- 8.7
  Background counts = 0.0
  Rate = 0.002 +/- 0.0002
[Wed Oct 26 15:42:03 2011] Vigneting correction estimate = 1.000000
[Wed Oct 26 15:42:03 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 26 15:42:03 2011] Assessing source extent using major axis lower bound
[Wed Oct 26 15:42:03 2011] Source does appear to be extended
[Wed Oct 26 15:42:03 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 26 15:43:13 2011] Not overwriting source region fullrun_ccd6_acisf02016_pi14-548_pass1_cl_src2_src.reg
[Wed Oct 26 15:43:13 2011] Extracting stamp from image fullrun_ccd6_acisf02016_pi14-548_cl_sm2.00.img.gz, (709, 1134) - (811, 1236)
[Wed Oct 26 15:43:13 2011] Writing fullrun_ccd6_acisf02016_pi14-548_pass1_cl_src2.gif
[Wed Oct 26 15:43:21 2011] ../../acisf02016/products/events/fullrun_ccd6_acisf02016_pi14-548_pass1_cl_src2_src.evt and ../../acisf02016/products/events/fullrun_ccd6_acisf02016_pi14-548_pass1_cl_src2_bgd.evt exist, delete to re-create
[Wed Oct 26 15:43:21 2011] Size of ../../acisf02016/products/events/fullrun_ccd6_acisf02016_pi14-548_pass1_cl_src2_src.evt.gz[events] = 77 counts
[Wed Oct 26 15:43:21 2011] Mean chipx,y = (907.42, 821.70)
[Wed Oct 26 15:43:21 2011] Mean tdetx,y = (3782.42, 2523.70)
[Wed Oct 26 15:43:21 2011] chipx,y range = (889.00-928.00, 801.00-843.00)
[Wed Oct 26 15:43:21 2011] Size of ../../acisf02016/products/events/fullrun_ccd6_acisf02016_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 26 counts
[Wed Oct 26 15:43:21 2011] ../../acisf02016/products/images/fullrun_ccd6_acisf02016_pi14-548_pass1_cl_src2_src.img and ../../acisf02016/products/images/fullrun_ccd6_acisf02016_pi14-548_pass1_cl_src2_bgd.img exist, delete to re-create
[Wed Oct 26 15:43:21 2011] ../../acisf02016/products/spectra/fullrun_ccd6_acisf02016_pi14-548_pass1_cl_src2_src.pi and ../../acisf02016/products/spectra/fullrun_ccd6_acisf02016_pi14-548_pass1_cl_src2_bgd.pi exist, delete to re-create
[Wed Oct 26 15:43:21 2011] Not generating rmf since there are only 74 counts
[Wed Oct 26 15:43:24 2011] ../../acisf02016/products/lightcurves/fullrun_ccd6_acisf02016_pi14-548_pass1_cl_src2_src.lc and ../../acisf02016/products/lightcurves/fullrun_ccd6_acisf02016_pi14-548_pass1_cl_src2_bgd.lc exist, delete to re-create
[Wed Oct 26 15:44:08 2011] 207.388
[Wed Oct 26 15:47:17 2011] Updating aperture counts using extracted products
[Wed Oct 26 15:47:17 2011] Error reading totcts from fullrun_ccd6_acisf02016_pi14-548_pass1_cl_src2_src.pi.gz
[Wed Oct 26 15:47:17 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct 26 15:47:17 2011] Using photon index=1.80, rate=0.00188, arf fullrun_ccd6_acisf02016_pi14-548_pass1_cl_src2.arf
[Wed Oct 26 15:47:17 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct 26 15:47:17 2011] Updating source flux to 1.8e-14
[Wed Oct 26 15:47:25 2011] Source 2 has fewer than 100.000000 counts, skipping spectral fitting