[Wed Oct 26 15:40:10 2011] Detection parameters:
  Position = (649.0, 1218.5) = 12 25 9.67 18 9 29.7
  Extent = 0.6" x 0.5", rotation angle = 177 degrees
  Source counts = 151.0 +/- 12.4
  Background counts = 2.0
  Rate = 0.004 +/- 0.0003

[Wed Oct 26 15:40:12 2011] Off-axis axis estimate = 2.85'
[Wed Oct 26 15:41:13 2011] Using EEF radius (= 0.55 ")to estimate initial spatial extent for simple fitting
[Wed Oct 26 15:41:13 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Oct 26 15:41:13 2011] Initial guess for spatial extent in simple fitting = 0.55"
[Wed Oct 26 15:41:13 2011] source mask rpix=1.1, npix_max = 10, mask sum = 12, frac = 1.143
[Wed Oct 26 15:41:13 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.55"
[Wed Oct 26 15:41:14 2011] fullrun_ccd6_acisf02016_pi14-548_cl_pass0_src1.ximg exists
[Wed Oct 26 15:41:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf02016_pi14-548_cl_pass0_src1.csv
[Wed Oct 26 15:41:14 2011] fullrun_ccd6_acisf02016_pi14-548_cl_pass0_src1_1.ximg exists
[Wed Oct 26 15:41:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf02016_pi14-548_cl_pass0_src1.csv
[Wed Oct 26 15:41:14 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf02016_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf02016_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 26 15:41:14 2011] fullrun_ccd6_acisf02016_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Wed Oct 26 15:41:14 2011] fullrun_ccd6_acisf02016_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Oct 26 15:41:14 2011] Fit fullrun_ccd6_acisf02016_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Oct 26 15:41:25 2011] Spatial fit model total counts = 152.460000, observed total counts = 154.000000
[Wed Oct 26 15:41:25 2011] Offset between fit and detection position for source 1 = 0.707473 pixels
[Wed Oct 26 15:41:25 2011] 153.114220 total counts/ 5.836220 bgd. counts: snr = 60.963803
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.707473 pixels
  Position = (649.5, 1219.0) = 12 25 9.68 18 9 29.7
  Extent = 0.7 (0.7-0.8)", rotation angle = 0
  Source counts = 147.3 +/- 12.4
  Background counts = 5.8
  Rate = 0.004 +/- 0.0003
[Wed Oct 26 15:41:25 2011] Vigneting correction estimate = 1.000000
[Wed Oct 26 15:41:25 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 26 15:41:25 2011] Assessing source extent using major axis lower bound
[Wed Oct 26 15:41:25 2011] Source does appear to be extended
[Wed Oct 26 15:41:25 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 26 15:41:53 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct 26 15:41:53 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Oct 26 15:41:53 2011] Initial guess for spatial extent in simple fitting = 0.75"
[Wed Oct 26 15:41:53 2011] source mask rpix=1.5, npix_max = 16, mask sum = 20, frac = 1.226
[Wed Oct 26 15:41:53 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 0.75"
[Wed Oct 26 15:41:53 2011] fullrun_ccd6_acisf02016_pi14-548_cl_pass1_src1.ximg exists
[Wed Oct 26 15:41:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf02016_pi14-548_cl_pass1_src1.csv
[Wed Oct 26 15:41:53 2011] fullrun_ccd6_acisf02016_pi14-548_cl_pass1_src1_1.ximg exists
[Wed Oct 26 15:41:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf02016_pi14-548_cl_pass1_src1.csv
[Wed Oct 26 15:41:53 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf02016_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf02016_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 26 15:41:53 2011] fullrun_ccd6_acisf02016_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Wed Oct 26 15:41:53 2011] fullrun_ccd6_acisf02016_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Oct 26 15:41:53 2011] Fit fullrun_ccd6_acisf02016_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Oct 26 15:42:03 2011] Spatial fit model total counts = 155.073000, observed total counts = 155.000000
[Wed Oct 26 15:42:03 2011] Offset between fit and detection position for source 1 = 0.007014 pixels
[Wed Oct 26 15:42:03 2011] 155.688080 total counts/ 7.805080 bgd. counts: snr = 52.933373
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.007014 pixels
  Position = (649.5, 1219.0) = 12 25 9.68 18 9 29.7
  Extent = 0.8 (0.7-0.8)", rotation angle = 0
  Source counts = 147.9 +/- 12.5
  Background counts = 7.8
  Rate = 0.004 +/- 0.0003
[Wed Oct 26 15:42:03 2011] Vigneting correction estimate = 1.000000
[Wed Oct 26 15:42:03 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 26 15:42:03 2011] Assessing source extent using major axis lower bound
[Wed Oct 26 15:42:03 2011] Source does appear to be extended
[Wed Oct 26 15:42:03 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 26 15:43:13 2011] Not overwriting source region fullrun_ccd6_acisf02016_pi14-548_pass1_cl_src1_src.reg
[Wed Oct 26 15:43:13 2011] Extracting stamp from image fullrun_ccd6_acisf02016_pi14-548_cl_sm2.00.img.gz, (615, 1185) - (684, 1253)
[Wed Oct 26 15:43:13 2011] Writing fullrun_ccd6_acisf02016_pi14-548_pass1_cl_src1.gif
[Wed Oct 26 15:43:14 2011] ../../acisf02016/products/events/fullrun_ccd6_acisf02016_pi14-548_pass1_cl_src1_src.evt and ../../acisf02016/products/events/fullrun_ccd6_acisf02016_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Wed Oct 26 15:43:14 2011] Size of ../../acisf02016/products/events/fullrun_ccd6_acisf02016_pi14-548_pass1_cl_src1_src.evt.gz[events] = 152 counts
[Wed Oct 26 15:43:14 2011] Mean chipx,y = (993.43, 746.32)
[Wed Oct 26 15:43:14 2011] Mean tdetx,y = (3868.43, 2448.32)
[Wed Oct 26 15:43:14 2011] chipx,y range = (973.00-1012.00, 728.00-765.00)
[Wed Oct 26 15:43:14 2011] Size of ../../acisf02016/products/events/fullrun_ccd6_acisf02016_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 14 counts
[Wed Oct 26 15:43:14 2011] ../../acisf02016/products/images/fullrun_ccd6_acisf02016_pi14-548_pass1_cl_src1_src.img and ../../acisf02016/products/images/fullrun_ccd6_acisf02016_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Wed Oct 26 15:43:14 2011] ../../acisf02016/products/spectra/fullrun_ccd6_acisf02016_pi14-548_pass1_cl_src1_src.pi and ../../acisf02016/products/spectra/fullrun_ccd6_acisf02016_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Wed Oct 26 15:43:17 2011] ../../acisf02016/products/lightcurves/fullrun_ccd6_acisf02016_pi14-548_pass1_cl_src1_src.lc and ../../acisf02016/products/lightcurves/fullrun_ccd6_acisf02016_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Wed Oct 26 15:44:08 2011] Keeping rmf generated by specextract
[Wed Oct 26 15:44:08 2011] 212.375
[Wed Oct 26 15:47:17 2011] Updating aperture counts using extracted products
[Wed Oct 26 15:47:17 2011] Error reading totcts from fullrun_ccd6_acisf02016_pi14-548_pass1_cl_src1_src.pi.gz
[Wed Oct 26 15:47:17 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct 26 15:47:17 2011] Using photon index=1.80, rate=0.00372, arf fullrun_ccd6_acisf02016_pi14-548_pass1_cl_src1.arf
[Wed Oct 26 15:47:17 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct 26 15:47:17 2011] Updating source flux to 3.6e-14
[Wed Oct 26 15:47:31 2011] Reading fit data from acisf02016/analysis//spectral/fullrun_ccd6_acisf02016_pi14-548_pass1_cl_src1_pl.csv
[Wed Oct 26 15:47:31 2011] Spectral fit parameter nH value = 1.68208e+13
[Wed Oct 26 15:47:31 2011] Spectral fit parameter PhoIndex value = 1.86523
[Wed Oct 26 15:47:31 2011] Failed to get F(0.3-8.0) from acisf02016/analysis//spectral/fullrun_ccd6_acisf02016_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Wed Oct 26 15:47:31 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct 26 15:47:31 2011] Using Nh = 1.7e+13, photon index=1.87, rate=0.00372, arf fullrun_ccd6_acisf02016_pi14-548_pass1_cl_src1.arf
[Wed Oct 26 15:47:31 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct 26 15:47:31 2011] Updating source flux to 3.6e-14