[Wed Oct 26 15:40:09 2011] Detection parameters:
  Position = (342.3, 426.2) = 12 25 2.06 18 17 25.3
  Extent = 2.2" x 2.0", rotation angle = 34 degrees
  Source counts = 76.5 +/- 9.6
  Background counts = 16.5
  Rate = 0.002 +/- 0.0002

[Wed Oct 26 15:40:09 2011] Off-axis axis estimate = 8.36'
[Wed Oct 26 15:41:12 2011] Using EEF radius (= 3.09 ")to estimate initial spatial extent for simple fitting
[Wed Oct 26 15:41:12 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Oct 26 15:41:12 2011] Initial guess for spatial extent in simple fitting = 3.09"
[Wed Oct 26 15:41:12 2011] source mask rpix=6.3, npix_max = 183, mask sum = 182, frac = 0.991
[Wed Oct 26 15:41:12 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 3.09"
[Wed Oct 26 15:41:12 2011] fullrun_ccd3_acisf02016_pi14-548_cl_pass0_src1.ximg exists
[Wed Oct 26 15:41:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf02016_pi14-548_cl_pass0_src1.csv
[Wed Oct 26 15:41:12 2011] fullrun_ccd3_acisf02016_pi14-548_cl_pass0_src1_1.ximg exists
[Wed Oct 26 15:41:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf02016_pi14-548_cl_pass0_src1.csv
[Wed Oct 26 15:41:12 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf02016_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf02016_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 26 15:41:13 2011] fullrun_ccd3_acisf02016_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Wed Oct 26 15:41:13 2011] fullrun_ccd3_acisf02016_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Oct 26 15:41:13 2011] Fit fullrun_ccd3_acisf02016_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Oct 26 15:41:23 2011] Spatial fit model total counts = 96.984800, observed total counts = 97.000000
[Wed Oct 26 15:41:23 2011] Offset between fit and detection position for source 7 = 1.455801 pixels
[Wed Oct 26 15:41:23 2011] 96.349700 total counts/ 26.820700 bgd. counts: snr = 13.425514
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 1.455801 pixels
  Position = (343.1, 427.4) = 12 25 2.05 18 17 25.7
  Extent = 2.7 (2.2-3.3)", rotation angle = 0
  Source counts = 69.5 +/- 9.8
  Background counts = 26.8
  Rate = 0.002 +/- 0.0002
[Wed Oct 26 15:41:23 2011] Vigneting correction estimate = 1.000000
[Wed Oct 26 15:41:23 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 26 15:41:23 2011] Assessing source extent using major axis lower bound
[Wed Oct 26 15:41:23 2011] Source does appear to be extended
[Wed Oct 26 15:41:23 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 26 15:41:51 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct 26 15:41:51 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Oct 26 15:41:51 2011] Initial guess for spatial extent in simple fitting = 2.73"
[Wed Oct 26 15:41:51 2011] source mask rpix=5.6, npix_max = 146, mask sum = 144, frac = 0.982
[Wed Oct 26 15:41:51 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 2.73"
[Wed Oct 26 15:41:51 2011] fullrun_ccd3_acisf02016_pi14-548_cl_pass1_src1.ximg exists
[Wed Oct 26 15:41:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf02016_pi14-548_cl_pass1_src1.csv
[Wed Oct 26 15:41:51 2011] fullrun_ccd3_acisf02016_pi14-548_cl_pass1_src1_1.ximg exists
[Wed Oct 26 15:41:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf02016_pi14-548_cl_pass1_src1.csv
[Wed Oct 26 15:41:51 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf02016_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf02016_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 26 15:41:51 2011] fullrun_ccd3_acisf02016_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Wed Oct 26 15:41:52 2011] fullrun_ccd3_acisf02016_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Oct 26 15:41:52 2011] Fit fullrun_ccd3_acisf02016_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Oct 26 15:42:01 2011] Spatial fit model total counts = 92.000000, observed total counts = 92.000000
[Wed Oct 26 15:42:01 2011] Offset between fit and detection position for source 7 = 0.218100 pixels
[Wed Oct 26 15:42:01 2011] 91.570100 total counts/ 24.823300 bgd. counts: snr = 13.396788
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.218100 pixels
  Position = (342.9, 427.5) = 12 25 2.05 18 17 25.7
  Extent = 2.6 (2.1-3.2)", rotation angle = 0
  Source counts = 66.7 +/- 9.6
  Background counts = 24.8
  Rate = 0.002 +/- 0.0002
[Wed Oct 26 15:42:01 2011] Vigneting correction estimate = 1.000000
[Wed Oct 26 15:42:01 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 26 15:42:01 2011] Assessing source extent using major axis lower bound
[Wed Oct 26 15:42:01 2011] Source does appear to be extended
[Wed Oct 26 15:42:01 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 26 15:42:36 2011] Not overwriting source region fullrun_ccd3_acisf02016_pi14-548_pass1_cl_src7_src.reg
[Wed Oct 26 15:42:36 2011] Extracting stamp from image fullrun_ccd3_acisf02016_pi14-548_cl_sm2.00.img.gz, (224, 308) - (462, 546)
[Wed Oct 26 15:42:36 2011] Writing fullrun_ccd3_acisf02016_pi14-548_pass1_cl_src7.gif
[Wed Oct 26 15:42:37 2011] ../../acisf02016/products/events/fullrun_ccd3_acisf02016_pi14-548_pass1_cl_src7_src.evt and ../../acisf02016/products/events/fullrun_ccd3_acisf02016_pi14-548_pass1_cl_src7_bgd.evt exist, delete to re-create
[Wed Oct 26 15:42:37 2011] Size of ../../acisf02016/products/events/fullrun_ccd3_acisf02016_pi14-548_pass1_cl_src7_src.evt.gz[events] = 85 counts
[Wed Oct 26 15:42:37 2011] Mean chipx,y = (77.93, 551.65)
[Wed Oct 26 15:42:37 2011] Mean tdetx,y = (4580.35, 3138.93)
[Wed Oct 26 15:42:37 2011] chipx,y range = (48.00-108.00, 517.00-586.00)
[Wed Oct 26 15:42:37 2011] Size of ../../acisf02016/products/events/fullrun_ccd3_acisf02016_pi14-548_pass1_cl_src7_bgd.evt.gz[events] = 123 counts
[Wed Oct 26 15:42:37 2011] ../../acisf02016/products/images/fullrun_ccd3_acisf02016_pi14-548_pass1_cl_src7_src.img and ../../acisf02016/products/images/fullrun_ccd3_acisf02016_pi14-548_pass1_cl_src7_bgd.img exist, delete to re-create
[Wed Oct 26 15:42:37 2011] ../../acisf02016/products/spectra/fullrun_ccd3_acisf02016_pi14-548_pass1_cl_src7_src.pi and ../../acisf02016/products/spectra/fullrun_ccd3_acisf02016_pi14-548_pass1_cl_src7_bgd.pi exist, delete to re-create
[Wed Oct 26 15:42:37 2011] Not generating rmf since there are only 66 counts
[Wed Oct 26 15:42:39 2011] ../../acisf02016/products/lightcurves/fullrun_ccd3_acisf02016_pi14-548_pass1_cl_src7_src.lc and ../../acisf02016/products/lightcurves/fullrun_ccd3_acisf02016_pi14-548_pass1_cl_src7_bgd.lc exist, delete to re-create
[Wed Oct 26 15:43:03 2011] 173.105
[Wed Oct 26 15:47:17 2011] Updating aperture counts using extracted products
[Wed Oct 26 15:47:17 2011] Error reading totcts from fullrun_ccd3_acisf02016_pi14-548_pass1_cl_src7_src.pi.gz
[Wed Oct 26 15:47:17 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct 26 15:47:17 2011] Using photon index=1.80, rate=0.00168, arf fullrun_ccd3_acisf02016_pi14-548_pass1_cl_src7.arf
[Wed Oct 26 15:47:17 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct 26 15:47:17 2011] Updating source flux to 2.1e-14
[Wed Oct 26 15:47:23 2011] Source 7 has fewer than 100.000000 counts, skipping spectral fitting
[Wed Oct 26 15:47:24 2011] acisf02016/analysis//spectral/fullrun_ccd3_acisf02016_pi14-548_pass1_cl_src7_pl.csv not found, spectral fit skipped or did not complete