[Sun Sep 25 09:50:38 2011] Detection parameters:
  Position = (678.0, 599.9) = 12 24 28.37 7 19 47.0
  Extent = 0.6" x 0.5", rotation angle = 93 degrees
  Source counts = 27.6 +/- 5.7
  Background counts = 4.4
  Rate = 0.0007 +/- 0.0001

[Sun Sep 25 09:50:42 2011] Off-axis axis estimate = 1.95'
[Sun Sep 25 09:51:45 2011] Using EEF radius (= 0.42 ")to estimate initial spatial extent for simple fitting
[Sun Sep 25 09:51:45 2011] Initial guess for spatial extent in simple fitting = 0.42"
[Sun Sep 25 09:51:45 2011] source mask rpix=0.9, npix_max = 7, mask sum = 4, frac = 0.538
[Sun Sep 25 09:51:45 2011] Giving source the simple spatial ID 33 for pass 0, mean size = 0.42"
[Sun Sep 25 09:51:49 2011] fullrun_ccd7_acisf02015_pi14-548_cl_pass0_src33.ximg exists
[Sun Sep 25 09:51:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf02015_pi14-548_cl_pass0_src33.csv
[Sun Sep 25 09:51:49 2011] fullrun_ccd7_acisf02015_pi14-548_cl_pass0_src33_1.ximg exists
[Sun Sep 25 09:51:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf02015_pi14-548_cl_pass0_src33.csv
[Sun Sep 25 09:51:49 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf02015_pi14-548_cl_pass0_src33_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf02015_pi14-548_cl_pass0_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 09:51:50 2011] fullrun_ccd7_acisf02015_pi14-548_cl_pass0_tfrozen_src33.ximg exists
[Sun Sep 25 09:51:50 2011] fullrun_ccd7_acisf02015_pi14-548_cl_pass0_tfrozen_src33_1.ximg exists
[Sun Sep 25 09:51:50 2011] Fit fullrun_ccd7_acisf02015_pi14-548_cl_pass0_tfrozen_src33 appears to have run properly
[Sun Sep 25 09:52:13 2011] Spatial fit model total counts = 35.753700, observed total counts = 36.000000
[Sun Sep 25 09:52:13 2011] Offset between fit and detection position for source 70 = 0.679385 pixels
[Sun Sep 25 09:52:13 2011] 35.236490 total counts/ 8.259390 bgd. counts: snr = 9.386880
Spatial fit parameters:
  Offset between fit and detection position for source 70 = 0.679385 pixels
  Position = (678.5, 600.3) = 12 24 28.37 7 19 47.0
  Extent = 0.4 (0.3-0.6)", rotation angle = 0
  Source counts = 27.0 +/- 5.9
  Background counts = 8.3
  Rate = 0.0007 +/- 0.0001
[Sun Sep 25 09:52:13 2011] Vigneting correction estimate = 1.000000
[Sun Sep 25 09:52:13 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep 25 09:52:13 2011] Assessing source extent using major axis lower bound
[Sun Sep 25 09:52:13 2011] Source does appear to be extended
[Sun Sep 25 09:52:13 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep 25 09:52:39 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Sep 25 09:52:39 2011] Initial guess for spatial extent in simple fitting = 0.44"
[Sun Sep 25 09:52:39 2011] source mask rpix=0.9, npix_max = 7, mask sum = 9, frac = 1.170
[Sun Sep 25 09:52:39 2011] Giving source the simple spatial ID 33 for pass 1, mean size = 0.44"
[Sun Sep 25 09:52:51 2011] fullrun_ccd7_acisf02015_pi14-548_cl_pass1_src33.ximg exists
[Sun Sep 25 09:52:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf02015_pi14-548_cl_pass1_src33.csv
[Sun Sep 25 09:52:51 2011] fullrun_ccd7_acisf02015_pi14-548_cl_pass1_src33_1.ximg exists
[Sun Sep 25 09:52:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf02015_pi14-548_cl_pass1_src33.csv
[Sun Sep 25 09:52:51 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf02015_pi14-548_cl_pass1_src33_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf02015_pi14-548_cl_pass1_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 09:52:56 2011] fullrun_ccd7_acisf02015_pi14-548_cl_pass1_tfrozen_src33.ximg exists
[Sun Sep 25 09:52:57 2011] fullrun_ccd7_acisf02015_pi14-548_cl_pass1_tfrozen_src33_1.ximg exists
[Sun Sep 25 09:52:57 2011] Fit fullrun_ccd7_acisf02015_pi14-548_cl_pass1_tfrozen_src33 appears to have run properly
[Sun Sep 25 09:53:30 2011] Spatial fit model total counts = 35.873800, observed total counts = 36.000000
[Sun Sep 25 09:53:30 2011] Offset between fit and detection position for source 70 = 0.022142 pixels
[Sun Sep 25 09:53:30 2011] 35.386950 total counts/ 8.310050 bgd. counts: snr = 9.392844
Spatial fit parameters:
  Offset between fit and detection position for source 70 = 0.022142 pixels
  Position = (678.5, 600.3) = 12 24 28.37 7 19 47.0
  Extent = 0.4 (0.3-0.6)", rotation angle = 0
  Source counts = 27.1 +/- 5.9
  Background counts = 8.3
  Rate = 0.0007 +/- 0.0001
[Sun Sep 25 09:53:31 2011] Vigneting correction estimate = 1.000000
[Sun Sep 25 09:53:31 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep 25 09:53:31 2011] Assessing source extent using major axis lower bound
[Sun Sep 25 09:53:31 2011] Source does appear to be extended
[Sun Sep 25 09:53:31 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep 25 09:56:50 2011] Not overwriting source region fullrun_ccd7_acisf02015_pi14-548_pass1_cl_src70_src.reg
[Sun Sep 25 09:56:50 2011] Extracting stamp from image fullrun_ccd7_acisf02015_pi14-548_cl_sm2.00.img.gz, (658, 580) - (699, 621)
[Sun Sep 25 09:56:50 2011] Writing fullrun_ccd7_acisf02015_pi14-548_pass1_cl_src70.gif
[Sun Sep 25 09:59:02 2011] ../../acisf02015/products/events/fullrun_ccd7_acisf02015_pi14-548_pass1_cl_src70_src.evt and ../../acisf02015/products/events/fullrun_ccd7_acisf02015_pi14-548_pass1_cl_src70_bgd.evt exist, delete to re-create
[Sun Sep 25 09:59:02 2011] Size of ../../acisf02015/products/events/fullrun_ccd7_acisf02015_pi14-548_pass1_cl_src70_src.evt.gz[events] = 29 counts
[Sun Sep 25 09:59:02 2011] Mean chipx,y = (451.17, 515.66)
[Sun Sep 25 09:59:02 2011] Mean tdetx,y = (4368.17, 2217.66)
[Sun Sep 25 09:59:02 2011] chipx,y range = (435.00-468.00, 498.00-535.00)
[Sun Sep 25 09:59:03 2011] Size of ../../acisf02015/products/events/fullrun_ccd7_acisf02015_pi14-548_pass1_cl_src70_bgd.evt.gz[events] = 18 counts
[Sun Sep 25 09:59:03 2011] ../../acisf02015/products/images/fullrun_ccd7_acisf02015_pi14-548_pass1_cl_src70_src.img and ../../acisf02015/products/images/fullrun_ccd7_acisf02015_pi14-548_pass1_cl_src70_bgd.img exist, delete to re-create
[Sun Sep 25 09:59:03 2011] ../../acisf02015/products/spectra/fullrun_ccd7_acisf02015_pi14-548_pass1_cl_src70_src.pi and ../../acisf02015/products/spectra/fullrun_ccd7_acisf02015_pi14-548_pass1_cl_src70_bgd.pi exist, delete to re-create
[Sun Sep 25 09:59:03 2011] Not generating rmf since there are only 27 counts
[Sun Sep 25 09:59:06 2011] ../../acisf02015/products/lightcurves/fullrun_ccd7_acisf02015_pi14-548_pass1_cl_src70_src.lc and ../../acisf02015/products/lightcurves/fullrun_ccd7_acisf02015_pi14-548_pass1_cl_src70_bgd.lc exist, delete to re-create
[Sun Sep 25 10:04:34 2011] 237.606
[Sun Sep 25 10:04:43 2011] Updating aperture counts using extracted products
[Sun Sep 25 10:04:43 2011] Error reading totcts from fullrun_ccd7_acisf02015_pi14-548_pass1_cl_src70_src.pi.gz
[Sun Sep 25 10:04:44 2011] Calculating source flux in energy range 0.30-8.00
[Sun Sep 25 10:04:44 2011] Using photon index=1.80, rate=0.00067, arf fullrun_ccd7_acisf02015_pi14-548_pass1_cl_src70.arf
[Sun Sep 25 10:04:44 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Sep 25 10:04:44 2011] Updating source flux to 4.1e-15
[Sun Sep 25 10:05:05 2011] Source 70 has fewer than 100.000000 counts, skipping spectral fitting