[Sun Sep 25 09:50:37 2011] Detection parameters:
  Position = (593.8, 556.9) = 12 24 31.16 7 19 25.9
  Extent = 0.5" x 0.5", rotation angle = 72 degrees
  Source counts = 21.5 +/- 4.9
  Background counts = 2.5
  Rate = 0.0005 +/- 0.0001

[Sun Sep 25 09:50:42 2011] Off-axis axis estimate = 1.99'
[Sun Sep 25 09:51:45 2011] Using EEF radius (= 0.43 ")to estimate initial spatial extent for simple fitting
[Sun Sep 25 09:51:45 2011] Initial guess for spatial extent in simple fitting = 0.43"
[Sun Sep 25 09:51:45 2011] source mask rpix=0.9, npix_max = 7, mask sum = 6, frac = 0.798
[Sun Sep 25 09:51:45 2011] Giving source the simple spatial ID 44 for pass 0, mean size = 0.43"
[Sun Sep 25 09:51:49 2011] fullrun_ccd7_acisf02015_pi14-548_cl_pass0_src44.ximg exists
[Sun Sep 25 09:51:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf02015_pi14-548_cl_pass0_src44.csv
[Sun Sep 25 09:51:49 2011] fullrun_ccd7_acisf02015_pi14-548_cl_pass0_src44_1.ximg exists
[Sun Sep 25 09:51:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf02015_pi14-548_cl_pass0_src44.csv
[Sun Sep 25 09:51:49 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf02015_pi14-548_cl_pass0_src44_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf02015_pi14-548_cl_pass0_src44.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 09:51:50 2011] fullrun_ccd7_acisf02015_pi14-548_cl_pass0_tfrozen_src44.ximg exists
[Sun Sep 25 09:51:50 2011] fullrun_ccd7_acisf02015_pi14-548_cl_pass0_tfrozen_src44_1.ximg exists
[Sun Sep 25 09:51:50 2011] Fit fullrun_ccd7_acisf02015_pi14-548_cl_pass0_tfrozen_src44 appears to have run properly
[Sun Sep 25 09:52:13 2011] Spatial fit model total counts = 27.999900, observed total counts = 28.000000
[Sun Sep 25 09:52:13 2011] Offset between fit and detection position for source 61 = 0.789708 pixels
[Sun Sep 25 09:52:13 2011] 27.914100 total counts/ 5.378900 bgd. counts: snr = 9.716608
Spatial fit parameters:
  Offset between fit and detection position for source 61 = 0.789708 pixels
  Position = (594.3, 557.5) = 12 24 31.16 7 19 25.9
  Extent = 0.4 (0.4-0.6)", rotation angle = 0
  Source counts = 22.5 +/- 5.3
  Background counts = 5.4
  Rate = 0.0006 +/- 0.0001
[Sun Sep 25 09:52:13 2011] Vigneting correction estimate = 1.000000
[Sun Sep 25 09:52:13 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep 25 09:52:13 2011] Assessing source extent using major axis lower bound
[Sun Sep 25 09:52:13 2011] Source does appear to be extended
[Sun Sep 25 09:52:13 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep 25 09:52:39 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Sep 25 09:52:39 2011] Initial guess for spatial extent in simple fitting = 0.44"
[Sun Sep 25 09:52:39 2011] source mask rpix=0.9, npix_max = 7, mask sum = 9, frac = 1.144
[Sun Sep 25 09:52:39 2011] Giving source the simple spatial ID 44 for pass 1, mean size = 0.44"
[Sun Sep 25 09:52:52 2011] fullrun_ccd7_acisf02015_pi14-548_cl_pass1_src44.ximg exists
[Sun Sep 25 09:52:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf02015_pi14-548_cl_pass1_src44.csv
[Sun Sep 25 09:52:53 2011] fullrun_ccd7_acisf02015_pi14-548_cl_pass1_src44_1.ximg exists
[Sun Sep 25 09:52:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf02015_pi14-548_cl_pass1_src44.csv
[Sun Sep 25 09:52:53 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf02015_pi14-548_cl_pass1_src44_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf02015_pi14-548_cl_pass1_src44.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 09:52:57 2011] fullrun_ccd7_acisf02015_pi14-548_cl_pass1_tfrozen_src44.ximg exists
[Sun Sep 25 09:52:57 2011] fullrun_ccd7_acisf02015_pi14-548_cl_pass1_tfrozen_src44_1.ximg exists
[Sun Sep 25 09:52:57 2011] Fit fullrun_ccd7_acisf02015_pi14-548_cl_pass1_tfrozen_src44 appears to have run properly
[Sun Sep 25 09:53:30 2011] Spatial fit model total counts = 27.999900, observed total counts = 28.000000
[Sun Sep 25 09:53:30 2011] Offset between fit and detection position for source 61 = 0.000000 pixels
[Sun Sep 25 09:53:30 2011] 27.914030 total counts/ 5.378830 bgd. counts: snr = 9.716671
Spatial fit parameters:
  Offset between fit and detection position for source 61 = 0.000000 pixels
  Position = (594.3, 557.5) = 12 24 31.16 7 19 25.9
  Extent = 0.4 (0.4-0.6)", rotation angle = 0
  Source counts = 22.5 +/- 5.3
  Background counts = 5.4
  Rate = 0.0006 +/- 0.0001
[Sun Sep 25 09:53:31 2011] Vigneting correction estimate = 1.000000
[Sun Sep 25 09:53:31 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep 25 09:53:31 2011] Assessing source extent using major axis lower bound
[Sun Sep 25 09:53:31 2011] Source does appear to be extended
[Sun Sep 25 09:53:31 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep 25 09:56:51 2011] Not overwriting source region fullrun_ccd7_acisf02015_pi14-548_pass1_cl_src61_src.reg
[Sun Sep 25 09:56:51 2011] Extracting stamp from image fullrun_ccd7_acisf02015_pi14-548_cl_sm2.00.img.gz, (574, 537) - (615, 578)
[Sun Sep 25 09:56:51 2011] Writing fullrun_ccd7_acisf02015_pi14-548_pass1_cl_src61.gif
[Sun Sep 25 09:59:45 2011] ../../acisf02015/products/events/fullrun_ccd7_acisf02015_pi14-548_pass1_cl_src61_src.evt and ../../acisf02015/products/events/fullrun_ccd7_acisf02015_pi14-548_pass1_cl_src61_bgd.evt exist, delete to re-create
[Sun Sep 25 09:59:45 2011] Size of ../../acisf02015/products/events/fullrun_ccd7_acisf02015_pi14-548_pass1_cl_src61_src.evt.gz[events] = 24 counts
[Sun Sep 25 09:59:45 2011] Mean chipx,y = (437.38, 422.25)
[Sun Sep 25 09:59:45 2011] Mean tdetx,y = (4354.38, 2124.25)
[Sun Sep 25 09:59:45 2011] chipx,y range = (422.00-453.00, 409.00-440.00)
[Sun Sep 25 09:59:45 2011] Size of ../../acisf02015/products/events/fullrun_ccd7_acisf02015_pi14-548_pass1_cl_src61_bgd.evt.gz[events] = 19 counts
[Sun Sep 25 09:59:45 2011] ../../acisf02015/products/images/fullrun_ccd7_acisf02015_pi14-548_pass1_cl_src61_src.img and ../../acisf02015/products/images/fullrun_ccd7_acisf02015_pi14-548_pass1_cl_src61_bgd.img exist, delete to re-create
[Sun Sep 25 09:59:45 2011] ../../acisf02015/products/spectra/fullrun_ccd7_acisf02015_pi14-548_pass1_cl_src61_src.pi and ../../acisf02015/products/spectra/fullrun_ccd7_acisf02015_pi14-548_pass1_cl_src61_bgd.pi exist, delete to re-create
[Sun Sep 25 09:59:45 2011] Not generating rmf since there are only 22 counts
[Sun Sep 25 09:59:48 2011] ../../acisf02015/products/lightcurves/fullrun_ccd7_acisf02015_pi14-548_pass1_cl_src61_src.lc and ../../acisf02015/products/lightcurves/fullrun_ccd7_acisf02015_pi14-548_pass1_cl_src61_bgd.lc exist, delete to re-create
[Sun Sep 25 10:04:34 2011] 240.101
[Sun Sep 25 10:04:43 2011] Updating aperture counts using extracted products
[Sun Sep 25 10:04:43 2011] Error reading totcts from fullrun_ccd7_acisf02015_pi14-548_pass1_cl_src61_src.pi.gz
[Sun Sep 25 10:04:45 2011] Calculating source flux in energy range 0.30-8.00
[Sun Sep 25 10:04:45 2011] Using photon index=1.80, rate=0.000557, arf fullrun_ccd7_acisf02015_pi14-548_pass1_cl_src61.arf
[Sun Sep 25 10:04:45 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Sep 25 10:04:45 2011] Updating source flux to 3.4e-15
[Sun Sep 25 10:05:05 2011] Source 61 has fewer than 100.000000 counts, skipping spectral fitting