[Sun Sep 25 09:50:30 2011] Detection parameters:
  Position = (757.8, 1072.5) = 12 24 14.59 7 15 35.4
  Extent = 0.8" x 0.5", rotation angle = 172 degrees
  Source counts = 146.2 +/- 12.2
  Background counts = 2.8
  Rate = 0.004 +/- 0.0003

[Sun Sep 25 09:50:31 2011] Off-axis axis estimate = 3.65'
[Sun Sep 25 09:51:45 2011] Using EEF radius (= 0.73 ")to estimate initial spatial extent for simple fitting
[Sun Sep 25 09:51:45 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Sep 25 09:51:45 2011] Initial guess for spatial extent in simple fitting = 0.73"
[Sun Sep 25 09:51:45 2011] source mask rpix=1.5, npix_max = 15, mask sum = 12, frac = 0.760
[Sun Sep 25 09:51:45 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.73"
[Sun Sep 25 09:51:45 2011] fullrun_ccd6_acisf02015_pi14-548_cl_pass0_src1.ximg exists
[Sun Sep 25 09:51:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf02015_pi14-548_cl_pass0_src1.csv
[Sun Sep 25 09:51:45 2011] fullrun_ccd6_acisf02015_pi14-548_cl_pass0_src1_1.ximg exists
[Sun Sep 25 09:51:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf02015_pi14-548_cl_pass0_src1.csv
[Sun Sep 25 09:51:45 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf02015_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf02015_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 09:51:45 2011] fullrun_ccd6_acisf02015_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Sun Sep 25 09:51:45 2011] fullrun_ccd6_acisf02015_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Sep 25 09:51:45 2011] Fit fullrun_ccd6_acisf02015_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Sep 25 09:52:01 2011] Spatial fit model total counts = 149.851000, observed total counts = 150.000000
[Sun Sep 25 09:52:01 2011] Offset between fit and detection position for source 1 = 0.738013 pixels
[Sun Sep 25 09:52:01 2011] 149.580410 total counts/ 4.983410 bgd. counts: snr = 64.773292
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.738013 pixels
  Position = (758.3, 1073.0) = 12 24 14.59 7 15 35.4
  Extent = 0.9 (0.8-1.0)", rotation angle = 0
  Source counts = 144.6 +/- 12.2
  Background counts = 5.0
  Rate = 0.004 +/- 0.0003
[Sun Sep 25 09:52:01 2011] Vigneting correction estimate = 1.000000
[Sun Sep 25 09:52:01 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep 25 09:52:01 2011] Assessing source extent using major axis lower bound
[Sun Sep 25 09:52:01 2011] Source does appear to be extended
[Sun Sep 25 09:52:01 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep 25 09:52:37 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Sep 25 09:52:37 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Sep 25 09:52:37 2011] Initial guess for spatial extent in simple fitting = 0.89"
[Sun Sep 25 09:52:37 2011] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.939
[Sun Sep 25 09:52:37 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 0.89"
[Sun Sep 25 09:52:38 2011] fullrun_ccd6_acisf02015_pi14-548_cl_pass1_src1.ximg exists
[Sun Sep 25 09:52:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf02015_pi14-548_cl_pass1_src1.csv
[Sun Sep 25 09:52:38 2011] fullrun_ccd6_acisf02015_pi14-548_cl_pass1_src1_1.ximg exists
[Sun Sep 25 09:52:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf02015_pi14-548_cl_pass1_src1.csv
[Sun Sep 25 09:52:38 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf02015_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf02015_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 09:52:38 2011] fullrun_ccd6_acisf02015_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Sun Sep 25 09:52:38 2011] fullrun_ccd6_acisf02015_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Sep 25 09:52:38 2011] Fit fullrun_ccd6_acisf02015_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Sep 25 09:53:19 2011] Spatial fit model total counts = 147.847000, observed total counts = 150.000000
[Sun Sep 25 09:53:19 2011] Offset between fit and detection position for source 1 = 0.035335 pixels
[Sun Sep 25 09:53:19 2011] 147.171370 total counts/ 4.335370 bgd. counts: snr = 68.600076
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.035335 pixels
  Position = (758.4, 1073.0) = 12 24 14.59 7 15 35.4
  Extent = 0.9 (0.8-1.0)", rotation angle = 0
  Source counts = 142.8 +/- 12.1
  Background counts = 4.3
  Rate = 0.004 +/- 0.0003
[Sun Sep 25 09:53:19 2011] Vigneting correction estimate = 1.000000
[Sun Sep 25 09:53:19 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep 25 09:53:19 2011] Assessing source extent using major axis lower bound
[Sun Sep 25 09:53:19 2011] Source does appear to be extended
[Sun Sep 25 09:53:19 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep 25 09:55:40 2011] Not overwriting source region fullrun_ccd6_acisf02015_pi14-548_pass1_cl_src1_src.reg
[Sun Sep 25 09:55:40 2011] Extracting stamp from image fullrun_ccd6_acisf02015_pi14-548_cl_sm2.00.img.gz, (717, 1032) - (799, 1114)
[Sun Sep 25 09:55:40 2011] Writing fullrun_ccd6_acisf02015_pi14-548_pass1_cl_src1.gif
[Sun Sep 25 09:55:42 2011] ../../acisf02015/products/events/fullrun_ccd6_acisf02015_pi14-548_pass1_cl_src1_src.evt and ../../acisf02015/products/events/fullrun_ccd6_acisf02015_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Sun Sep 25 09:55:42 2011] Size of ../../acisf02015/products/events/fullrun_ccd6_acisf02015_pi14-548_pass1_cl_src1_src.evt.gz[events] = 149 counts
[Sun Sep 25 09:55:42 2011] Mean chipx,y = (877.91, 748.19)
[Sun Sep 25 09:55:42 2011] Mean tdetx,y = (3752.91, 2450.19)
[Sun Sep 25 09:55:42 2011] chipx,y range = (860.00-896.00, 728.00-771.00)
[Sun Sep 25 09:55:42 2011] Size of ../../acisf02015/products/events/fullrun_ccd6_acisf02015_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 24 counts
[Sun Sep 25 09:55:42 2011] ../../acisf02015/products/images/fullrun_ccd6_acisf02015_pi14-548_pass1_cl_src1_src.img and ../../acisf02015/products/images/fullrun_ccd6_acisf02015_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Sun Sep 25 09:55:42 2011] ../../acisf02015/products/spectra/fullrun_ccd6_acisf02015_pi14-548_pass1_cl_src1_src.pi and ../../acisf02015/products/spectra/fullrun_ccd6_acisf02015_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Sun Sep 25 09:55:48 2011] ../../acisf02015/products/lightcurves/fullrun_ccd6_acisf02015_pi14-548_pass1_cl_src1_src.lc and ../../acisf02015/products/lightcurves/fullrun_ccd6_acisf02015_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Sun Sep 25 09:56:47 2011] Keeping rmf generated by specextract
[Sun Sep 25 09:56:47 2011] 209.157
[Sun Sep 25 10:04:42 2011] Updating aperture counts using extracted products
[Sun Sep 25 10:04:42 2011] Error reading totcts from fullrun_ccd6_acisf02015_pi14-548_pass1_cl_src1_src.pi.gz
[Sun Sep 25 10:04:42 2011] Calculating source flux in energy range 0.30-8.00
[Sun Sep 25 10:04:42 2011] Using photon index=1.80, rate=0.00353, arf fullrun_ccd6_acisf02015_pi14-548_pass1_cl_src1.arf
[Sun Sep 25 10:04:42 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Sep 25 10:04:42 2011] Updating source flux to 3.4e-14
[Sun Sep 25 10:05:05 2011] Reading fit data from acisf02015/analysis//spectral/fullrun_ccd6_acisf02015_pi14-548_pass1_cl_src1_pl.csv
[Sun Sep 25 10:05:05 2011] Spectral fit parameter nH value = 1.41853e+14
[Sun Sep 25 10:05:05 2011] Spectral fit parameter PhoIndex value = 1.75356
[Sun Sep 25 10:05:05 2011] Failed to get F(0.3-8.0) from acisf02015/analysis//spectral/fullrun_ccd6_acisf02015_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sun Sep 25 10:05:05 2011] Calculating source flux in energy range 0.30-8.00
[Sun Sep 25 10:05:05 2011] Using Nh = 1.4e+14, photon index=1.75, rate=0.00353, arf fullrun_ccd6_acisf02015_pi14-548_pass1_cl_src1.arf
[Sun Sep 25 10:05:05 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Sep 25 10:05:05 2011] Updating source flux to 3.5e-14