[Tue Apr 10 20:00:28 2012] Detection parameters:
  Position = (740.0, 773.3) = 7 36 32.27 65 30 32.2
  Extent = 0.7" x 0.6", rotation angle = 142 degrees
  Source counts = 37.3 +/- 6.2
  Background counts = 1.7
  Rate = 0.001 +/- 0.0002

[Tue Apr 10 20:00:30 2012] Off-axis axis estimate = 4.62'
[Tue Apr 10 20:01:31 2012] Using EEF radius (= 1.04 ")to estimate initial spatial extent for simple fitting
[Tue Apr 10 20:01:31 2012] Initial guess for spatial extent in simple fitting = 1.04"
[Tue Apr 10 20:01:31 2012] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.103
[Tue Apr 10 20:01:31 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 1.04"
[Tue Apr 10 20:01:31 2012] fullrun_ccd6_acisf02014_pi14-548_cl_pass0_src4.ximg exists
[Tue Apr 10 20:01:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf02014_pi14-548_cl_pass0_src4.csv
[Tue Apr 10 20:01:31 2012] fullrun_ccd6_acisf02014_pi14-548_cl_pass0_src4_1.ximg exists
[Tue Apr 10 20:01:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf02014_pi14-548_cl_pass0_src4.csv
[Tue Apr 10 20:01:31 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf02014_pi14-548_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf02014_pi14-548_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 20:01:31 2012] fullrun_ccd6_acisf02014_pi14-548_cl_pass0_tfrozen_src4.ximg exists
[Tue Apr 10 20:01:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf02014_pi14-548_cl_pass0_tfrozen_src4.csv
[Tue Apr 10 20:01:31 2012] fullrun_ccd6_acisf02014_pi14-548_cl_pass0_tfrozen_src4_1.ximg exists
[Tue Apr 10 20:01:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf02014_pi14-548_cl_pass0_tfrozen_src4.csv
[Tue Apr 10 20:01:31 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf02014_pi14-548_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf02014_pi14-548_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 20:01:42 2012] Spatial fit model total counts = 52.080500, observed total counts = 58.000000
[Tue Apr 10 20:01:42 2012] Offset between fit and detection position for source 10 = 0.562990 pixels
[Tue Apr 10 20:01:42 2012] 51.679510 total counts/ 7.471310 bgd. counts: snr = 16.173516
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.562990 pixels
  Position = (740.6, 773.3) = 7 36 32.26 65 30 31.9
  Extent = 1.0 (0.7-1.3)", rotation angle = 0
  Source counts = 44.2 +/- 7.2
  Background counts = 7.5
  Rate = 0.001 +/- 0.0002
[Tue Apr 10 20:01:42 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 20:01:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 20:01:42 2012] Assessing source extent using major axis lower bound
[Tue Apr 10 20:01:42 2012] Source does appear to be extended
[Tue Apr 10 20:01:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 20:02:03 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Apr 10 20:02:03 2012] Initial guess for spatial extent in simple fitting = 1.04"
[Tue Apr 10 20:02:03 2012] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.911
[Tue Apr 10 20:02:03 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 1.04"
[Tue Apr 10 20:02:04 2012] fullrun_ccd6_acisf02014_pi14-548_cl_pass1_src4.ximg exists
[Tue Apr 10 20:02:04 2012] fullrun_ccd6_acisf02014_pi14-548_cl_pass1_src4_1.ximg exists
[Tue Apr 10 20:02:04 2012] Fit fullrun_ccd6_acisf02014_pi14-548_cl_pass1_src4 appears to have run properly
[Tue Apr 10 20:02:04 2012] fullrun_ccd6_acisf02014_pi14-548_cl_pass1_tfrozen_src4.ximg exists
[Tue Apr 10 20:02:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf02014_pi14-548_cl_pass1_tfrozen_src4.csv
[Tue Apr 10 20:02:04 2012] fullrun_ccd6_acisf02014_pi14-548_cl_pass1_tfrozen_src4_1.ximg exists
[Tue Apr 10 20:02:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf02014_pi14-548_cl_pass1_tfrozen_src4.csv
[Tue Apr 10 20:02:04 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf02014_pi14-548_cl_pass1_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf02014_pi14-548_cl_pass1_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 20:02:12 2012] Spatial fit model total counts = 54.277600, observed total counts = 58.000000
[Tue Apr 10 20:02:12 2012] Offset between fit and detection position for source 10 = 0.305880 pixels
[Tue Apr 10 20:02:12 2012] 54.141750 total counts/ 8.900150 bgd. counts: snr = 15.164891
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.305880 pixels
  Position = (740.8, 773.0) = 7 36 32.25 65 30 31.8
  Extent = 1.3 (1.0-1.8)" x 0.8 (0.6-0.9)", rotation angle = 59 (38-73) degrees
  Source counts = 45.2 +/- 7.4
  Background counts = 8.9
  Rate = 0.001 +/- 0.0002
[Tue Apr 10 20:02:12 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 20:02:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 20:02:12 2012] Assessing source extent using major axis lower bound
[Tue Apr 10 20:02:12 2012] Source does appear to be extended
[Tue Apr 10 20:02:12 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.12
[Tue Apr 10 20:02:56 2012] Not overwriting source region fullrun_ccd6_acisf02014_pi14-548_pass1_cl_src10_src.reg
[Tue Apr 10 20:02:56 2012] Extracting stamp from image fullrun_ccd6_acisf02014_pi14-548_cl_sm2.00.img.gz, (679, 711) - (802, 835)
[Tue Apr 10 20:02:56 2012] Writing fullrun_ccd6_acisf02014_pi14-548_pass1_cl_src10.gif
[Tue Apr 10 20:03:21 2012] ../../acisf02014/products/events/fullrun_ccd6_acisf02014_pi14-548_pass1_cl_src10_src.evt and ../../acisf02014/products/events/fullrun_ccd6_acisf02014_pi14-548_pass1_cl_src10_bgd.evt exist, delete to re-create
[Tue Apr 10 20:03:21 2012] Size of ../../acisf02014/products/events/fullrun_ccd6_acisf02014_pi14-548_pass1_cl_src10_src.evt.gz[events] = 54 counts
[Tue Apr 10 20:03:21 2012] Mean chipx,y = (729.24, 717.39)
[Tue Apr 10 20:03:21 2012] Mean tdetx,y = (3604.24, 2419.39)
[Tue Apr 10 20:03:21 2012] chipx,y range = (710.00-751.00, 699.00-740.00)
[Tue Apr 10 20:03:21 2012] Size of ../../acisf02014/products/events/fullrun_ccd6_acisf02014_pi14-548_pass1_cl_src10_bgd.evt.gz[events] = 68 counts
[Tue Apr 10 20:03:21 2012] ../../acisf02014/products/images/fullrun_ccd6_acisf02014_pi14-548_pass1_cl_src10_src.img and ../../acisf02014/products/images/fullrun_ccd6_acisf02014_pi14-548_pass1_cl_src10_bgd.img exist, delete to re-create
[Tue Apr 10 20:03:21 2012] Not generating rmf since there are only 45 counts
[Tue Apr 10 20:03:21 2012] arf not found, will run specextract
[Tue Apr 10 20:03:23 2012] ../../acisf02014/products/spectra/fullrun_ccd6_acisf02014_pi14-548_pass1_cl_src10_bkg.pi not found
[Tue Apr 10 20:03:23 2012] ../../acisf02014/products/spectra/fullrun_ccd6_acisf02014_pi14-548_pass1_cl_src10.warf not found
[Tue Apr 10 20:03:23 2012] ../../acisf02014/products/spectra/fullrun_ccd6_acisf02014_pi14-548_pass1_cl_src10.wrmf not found
[Tue Apr 10 20:03:23 2012] Removal of ../../acisf02014/products/spectra/fullrun_ccd6_acisf02014_pi14-548_pass1_cl_src10.soff failed
[Tue Apr 10 20:03:23 2012] Failed to rename ../../acisf02014/products/spectra/fullrun_ccd6_acisf02014_pi14-548_pass1_cl_src10_grp.pi to ../../acisf02014/products/spectra/fullrun_ccd6_acisf02014_pi14-548_pass1_cl_src10_src.pi
[Tue Apr 10 20:03:28 2012] ../../acisf02014/products/lightcurves/fullrun_ccd6_acisf02014_pi14-548_pass1_cl_src10_src.lc and ../../acisf02014/products/lightcurves/fullrun_ccd6_acisf02014_pi14-548_pass1_cl_src10_bgd.lc exist, delete to re-create
[Tue Apr 10 20:05:38 2012] No arf file found
[Tue Apr 10 20:10:03 2012] Updating aperture counts using extracted products
[Tue Apr 10 20:10:03 2012] Error reading totcts from fullrun_ccd6_acisf02014_pi14-548_pass1_cl_src10_src.pi
[Tue Apr 10 20:10:03 2012] No arf file for this source, not re-computing flux
[Tue Apr 10 20:10:08 2012] Source 10 has fewer than 100.000000 counts, skipping spectral fitting
[Tue Apr 10 20:10:09 2012] acisf02014/analysis//spectral/fullrun_ccd6_acisf02014_pi14-548_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete