[Fri Oct 21 08:47:59 2011] Detection parameters:
  Position = (934.9, 704.9) = 18 16 47.57 -36 23 32.4
  Extent = 2.1" x 1.6", rotation angle = 160 degrees
  Source counts = 111.3 +/- 11.0
  Background counts = 10.7
  Rate = 0.004 +/- 0.0004

[Fri Oct 21 08:47:59 2011] Off-axis axis estimate = 6.02'
[Fri Oct 21 08:48:49 2011] Using EEF radius (= 1.64 ")to estimate initial spatial extent for simple fitting
[Fri Oct 21 08:48:49 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct 21 08:48:49 2011] Initial guess for spatial extent in simple fitting = 1.64"
[Fri Oct 21 08:48:49 2011] source mask rpix=3.3, npix_max = 58, mask sum = 64, frac = 1.088
[Fri Oct 21 08:48:49 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 1.64"
[Fri Oct 21 08:48:50 2011] fullrun_ccd6_acisf02011_pi14-548_cl_pass0_src1.ximg exists
[Fri Oct 21 08:48:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf02011_pi14-548_cl_pass0_src1.csv
[Fri Oct 21 08:48:50 2011] fullrun_ccd6_acisf02011_pi14-548_cl_pass0_src1_1.ximg exists
[Fri Oct 21 08:48:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf02011_pi14-548_cl_pass0_src1.csv
[Fri Oct 21 08:48:50 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf02011_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf02011_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 21 08:48:50 2011] fullrun_ccd6_acisf02011_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Fri Oct 21 08:48:50 2011] fullrun_ccd6_acisf02011_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Oct 21 08:48:50 2011] Fit fullrun_ccd6_acisf02011_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Oct 21 08:49:00 2011] Spatial fit model total counts = 117.894000, observed total counts = 118.000000
[Fri Oct 21 08:49:00 2011] Offset between fit and detection position for source 14 = 0.475907 pixels
[Fri Oct 21 08:49:00 2011] 118.034810 total counts/ 3.114810 bgd. counts: snr = 65.114819
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 0.475907 pixels
  Position = (935.3, 705.0) = 18 16 47.57 -36 23 32.6
  Extent = 2.3 (1.7-2.7)", rotation angle = 0
  Source counts = 114.9 +/- 10.9
  Background counts = 3.1
  Rate = 0.004 +/- 0.0004
[Fri Oct 21 08:49:00 2011] Vigneting correction estimate = 1.000000
[Fri Oct 21 08:49:00 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 21 08:49:00 2011] Assessing source extent using major axis lower bound
[Fri Oct 21 08:49:00 2011] Source does appear to be extended
[Fri Oct 21 08:49:00 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 21 08:49:22 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct 21 08:49:22 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct 21 08:49:22 2011] Initial guess for spatial extent in simple fitting = 2.33"
[Fri Oct 21 08:49:22 2011] source mask rpix=4.7, npix_max = 109, mask sum = 110, frac = 1.007
[Fri Oct 21 08:49:22 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 2.33"
[Fri Oct 21 08:49:22 2011] fullrun_ccd6_acisf02011_pi14-548_cl_pass1_src1.ximg exists
[Fri Oct 21 08:49:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf02011_pi14-548_cl_pass1_src1.csv
[Fri Oct 21 08:49:22 2011] fullrun_ccd6_acisf02011_pi14-548_cl_pass1_src1_1.ximg exists
[Fri Oct 21 08:49:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf02011_pi14-548_cl_pass1_src1.csv
[Fri Oct 21 08:49:22 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf02011_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf02011_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 21 08:49:22 2011] fullrun_ccd6_acisf02011_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Fri Oct 21 08:49:23 2011] fullrun_ccd6_acisf02011_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Oct 21 08:49:23 2011] Fit fullrun_ccd6_acisf02011_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Oct 21 08:49:32 2011] Spatial fit model total counts = 125.132000, observed total counts = 125.000000
[Fri Oct 21 08:49:32 2011] Offset between fit and detection position for source 14 = 0.370729 pixels
[Fri Oct 21 08:49:32 2011] 125.136380 total counts/ 6.452380 bgd. counts: snr = 46.723160
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 0.370729 pixels
  Position = (935.3, 705.4) = 18 16 47.57 -36 23 32.4
  Extent = 2.4 (2.1-2.8)", rotation angle = 0
  Source counts = 118.7 +/- 11.2
  Background counts = 6.5
  Rate = 0.004 +/- 0.0004
[Fri Oct 21 08:49:32 2011] Vigneting correction estimate = 1.000000
[Fri Oct 21 08:49:32 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 21 08:49:32 2011] Assessing source extent using major axis lower bound
[Fri Oct 21 08:49:32 2011] Source does appear to be extended
[Fri Oct 21 08:49:32 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 21 08:50:49 2011] Not overwriting source region fullrun_ccd6_acisf02011_pi14-548_pass1_cl_src14_src.reg
[Fri Oct 21 08:50:49 2011] Extracting stamp from image fullrun_ccd6_acisf02011_pi14-548_cl_sm2.00.img.gz, (825, 595) - (1046, 816)
[Fri Oct 21 08:50:49 2011] Writing fullrun_ccd6_acisf02011_pi14-548_pass1_cl_src14.gif
[Fri Oct 21 08:50:50 2011] ../../acisf02011/products/events/fullrun_ccd6_acisf02011_pi14-548_pass1_cl_src14_src.evt and ../../acisf02011/products/events/fullrun_ccd6_acisf02011_pi14-548_pass1_cl_src14_bgd.evt exist, delete to re-create
[Fri Oct 21 08:50:50 2011] Size of ../../acisf02011/products/events/fullrun_ccd6_acisf02011_pi14-548_pass1_cl_src14_src.evt.gz[events] = 125 counts
[Fri Oct 21 08:50:50 2011] Mean chipx,y = (628.90, 895.39)
[Fri Oct 21 08:50:50 2011] Mean tdetx,y = (3503.90, 2597.39)
[Fri Oct 21 08:50:50 2011] chipx,y range = (607.00-653.00, 869.00-918.00)
[Fri Oct 21 08:50:50 2011] Size of ../../acisf02011/products/events/fullrun_ccd6_acisf02011_pi14-548_pass1_cl_src14_bgd.evt.gz[events] = 120 counts
[Fri Oct 21 08:50:50 2011] ../../acisf02011/products/images/fullrun_ccd6_acisf02011_pi14-548_pass1_cl_src14_src.img and ../../acisf02011/products/images/fullrun_ccd6_acisf02011_pi14-548_pass1_cl_src14_bgd.img exist, delete to re-create
[Fri Oct 21 08:50:50 2011] ../../acisf02011/products/spectra/fullrun_ccd6_acisf02011_pi14-548_pass1_cl_src14_src.pi and ../../acisf02011/products/spectra/fullrun_ccd6_acisf02011_pi14-548_pass1_cl_src14_bgd.pi exist, delete to re-create
[Fri Oct 21 08:50:53 2011] ../../acisf02011/products/lightcurves/fullrun_ccd6_acisf02011_pi14-548_pass1_cl_src14_src.lc and ../../acisf02011/products/lightcurves/fullrun_ccd6_acisf02011_pi14-548_pass1_cl_src14_bgd.lc exist, delete to re-create
[Fri Oct 21 08:51:36 2011] Keeping rmf generated by specextract
[Fri Oct 21 08:51:36 2011] 193.27
[Fri Oct 21 08:53:12 2011] Updating aperture counts using extracted products
[Fri Oct 21 08:53:12 2011] Error reading totcts from fullrun_ccd6_acisf02011_pi14-548_pass1_cl_src14_src.pi.gz
[Fri Oct 21 08:53:12 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 21 08:53:12 2011] Using photon index=1.80, rate=0.00414, arf fullrun_ccd6_acisf02011_pi14-548_pass1_cl_src14.arf
[Fri Oct 21 08:53:12 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 21 08:53:12 2011] Updating source flux to 4.4e-14
[Fri Oct 21 08:53:35 2011] Reading fit data from acisf02011/analysis//spectral/fullrun_ccd6_acisf02011_pi14-548_pass1_cl_src14_pl.csv
[Fri Oct 21 08:53:35 2011] Spectral fit parameter nH value = 1.11597e+15
[Fri Oct 21 08:53:35 2011] Spectral fit parameter PhoIndex value = 2.46952
[Fri Oct 21 08:53:35 2011] Failed to get F(0.3-8.0) from acisf02011/analysis//spectral/fullrun_ccd6_acisf02011_pi14-548_pass1_cl_src14_pl.csv, possibly due to different flux energy range selected
[Fri Oct 21 08:53:35 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 21 08:53:35 2011] Using Nh = 1.1e+15, photon index=2.47, rate=0.00414, arf fullrun_ccd6_acisf02011_pi14-548_pass1_cl_src14.arf
[Fri Oct 21 08:53:35 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 21 08:53:35 2011] Updating source flux to 4.3e-14