[Fri Oct 28 16:29:36 2011] Detection parameters:
  Position = (160.0, 37.0) = 5 34 31.55 22 0 32.6
  Extent = 0.5" x 0.5", rotation angle = 45 degrees
  Source counts = 74.0 +/- 31.1
  Background counts = 892.0
  Rate = 0.02 +/- 0.01

[Fri Oct 28 16:30:14 2011] Off-axis axis estimate = 0.66'
[Fri Oct 28 16:55:39 2011] Using EEF radius (= 0.39 ")to estimate initial spatial extent for simple fitting
[Fri Oct 28 16:55:39 2011] Initial guess for spatial extent in simple fitting = 0.39"
[Fri Oct 28 16:55:39 2011] source mask rpix=0.8, npix_max = 6, mask sum = 4, frac = 0.607
[Fri Oct 28 16:55:39 2011] Giving source the simple spatial ID 39 for pass 0, mean size = 0.39"
[Fri Oct 28 16:55:41 2011] fullrun_ccd7_acisf01994_pi14-548_cl_pass0_src39.ximg exists
[Fri Oct 28 16:55:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf01994_pi14-548_cl_pass0_src39.csv
[Fri Oct 28 16:55:41 2011] fullrun_ccd7_acisf01994_pi14-548_cl_pass0_src39_1.ximg exists
[Fri Oct 28 16:55:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf01994_pi14-548_cl_pass0_src39.csv
[Fri Oct 28 16:55:41 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf01994_pi14-548_cl_pass0_src39_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf01994_pi14-548_cl_pass0_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 28 16:55:44 2011] fullrun_ccd7_acisf01994_pi14-548_cl_pass0_tfrozen_src39.ximg exists
[Fri Oct 28 16:55:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf01994_pi14-548_cl_pass0_tfrozen_src39.csv
[Fri Oct 28 16:55:44 2011] fullrun_ccd7_acisf01994_pi14-548_cl_pass0_tfrozen_src39_1.ximg exists
[Fri Oct 28 16:55:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf01994_pi14-548_cl_pass0_tfrozen_src39.csv
[Fri Oct 28 16:55:44 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf01994_pi14-548_cl_pass0_tfrozen_src39_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf01994_pi14-548_cl_pass0_tfrozen_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 28 16:56:15 2011] Spatial fit model total counts = 47272.600000, observed total counts = 56983.000000
[Fri Oct 28 16:56:15 2011] Poor agreement between spatial fit and data for source 40
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Oct 28 16:56:15 2011] Vigneting correction estimate = 1.000000
[Fri Oct 28 16:56:15 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 28 16:56:15 2011] Assessing source extent using major
[Fri Oct 28 16:56:15 2011] Source does appear to be extended
[Fri Oct 28 16:56:15 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 28 16:56:15 2011] Deleting source due to low Poisson probability 0.7