[Thu Oct 27 16:34:50 2011] Detection parameters:
  Position = (440.7, 674.6) = 14 40 53.98 -62 41 36.5
  Extent = 0.9" x 0.9", rotation angle = 136 degrees
  Source counts = 266.9 +/- 27.5
  Background counts = 488.1
  Rate = 0.003 +/- 0.0003

[Thu Oct 27 16:35:28 2011] Off-axis axis estimate = 2.04'
[Thu Oct 27 16:47:08 2011] Using EEF radius (= 0.43 ")to estimate initial spatial extent for simple fitting
[Thu Oct 27 16:47:08 2011] Initial guess for spatial extent in simple fitting = 0.43"
[Thu Oct 27 16:47:08 2011] source mask rpix=0.9, npix_max = 7, mask sum = 9, frac = 1.176
[Thu Oct 27 16:47:08 2011] Giving source the simple spatial ID 85 for pass 0, mean size = 0.43"
[Thu Oct 27 16:47:12 2011] fullrun_ccd7_acisf01993_pi14-548_cl_pass0_src85.ximg exists
[Thu Oct 27 16:47:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf01993_pi14-548_cl_pass0_src85.csv
[Thu Oct 27 16:47:12 2011] fullrun_ccd7_acisf01993_pi14-548_cl_pass0_src85_1.ximg exists
[Thu Oct 27 16:47:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf01993_pi14-548_cl_pass0_src85.csv
[Thu Oct 27 16:47:12 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf01993_pi14-548_cl_pass0_src85_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf01993_pi14-548_cl_pass0_src85.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct 27 16:47:14 2011] fullrun_ccd7_acisf01993_pi14-548_cl_pass0_tfrozen_src85.ximg exists
[Thu Oct 27 16:47:14 2011] fullrun_ccd7_acisf01993_pi14-548_cl_pass0_tfrozen_src85_1.ximg exists
[Thu Oct 27 16:47:14 2011] Fit fullrun_ccd7_acisf01993_pi14-548_cl_pass0_tfrozen_src85 appears to have run properly
[Thu Oct 27 16:48:13 2011] Source 110 is offset by -2.402733 and 1.049660 pixels which is larger than
2 X fitted extent = 1.310516 x 1.310516, not incorporating fit results
[Thu Oct 27 16:48:13 2011] Vigneting correction estimate = 1.000000
[Thu Oct 27 16:48:13 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct 27 16:48:13 2011] Assessing source extent using major
[Thu Oct 27 16:48:13 2011] Source does appear to be extended
[Thu Oct 27 16:48:13 2011] Computing asymmetry using major and minor axis, asym = 1.02
[Thu Oct 27 16:49:08 2011] Using EEF radius (= 0.43 ")to estimate initial spatial extent for simple fitting
[Thu Oct 27 16:49:08 2011] Initial guess for spatial extent in simple fitting = 0.43"
[Thu Oct 27 16:49:08 2011] source mask rpix=0.9, npix_max = 7, mask sum = 9, frac = 1.176
[Thu Oct 27 16:49:08 2011] Giving source the simple spatial ID 84 for pass 1, mean size = 0.43"
[Thu Oct 27 16:49:14 2011] fullrun_ccd7_acisf01993_pi14-548_cl_pass1_src84.ximg exists
[Thu Oct 27 16:49:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf01993_pi14-548_cl_pass1_src84.csv
[Thu Oct 27 16:49:14 2011] fullrun_ccd7_acisf01993_pi14-548_cl_pass1_src84_1.ximg exists
[Thu Oct 27 16:49:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf01993_pi14-548_cl_pass1_src84.csv
[Thu Oct 27 16:49:14 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf01993_pi14-548_cl_pass1_src84_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf01993_pi14-548_cl_pass1_src84.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct 27 16:49:19 2011] fullrun_ccd7_acisf01993_pi14-548_cl_pass1_tfrozen_src84.ximg exists
[Thu Oct 27 16:49:19 2011] fullrun_ccd7_acisf01993_pi14-548_cl_pass1_tfrozen_src84_1.ximg exists
[Thu Oct 27 16:49:19 2011] Fit fullrun_ccd7_acisf01993_pi14-548_cl_pass1_tfrozen_src84 appears to have run properly
[Thu Oct 27 16:50:04 2011] Warning: source 54 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 110 at 27.149580 pixels away
[Thu Oct 27 16:50:04 2011] Source 110 is offset by -2.402733 and 1.049662 pixels which is larger than
2 X fitted extent = 1.310520 x 1.310520, not incorporating fit results
[Thu Oct 27 16:50:04 2011] Vigneting correction estimate = 1.000000
[Thu Oct 27 16:50:04 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct 27 16:50:04 2011] Assessing source extent using major
[Thu Oct 27 16:50:04 2011] Source does appear to be extended
[Thu Oct 27 16:50:04 2011] Computing asymmetry using major and minor axis, asym = 1.02
[Thu Oct 27 16:57:41 2011] Not overwriting source region fullrun_ccd7_acisf01993_pi14-548_pass1_cl_src110_src.reg
[Thu Oct 27 16:57:41 2011] Extracting stamp from image fullrun_ccd7_acisf01993_pi14-548_cl_sm2.00.img.gz, (399, 632) - (483, 717)
[Thu Oct 27 16:57:41 2011] Writing fullrun_ccd7_acisf01993_pi14-548_pass1_cl_src110.gif
[Thu Oct 27 17:02:23 2011] ../../acisf01993/products/events/fullrun_ccd7_acisf01993_pi14-548_pass1_cl_src110_src.evt and ../../acisf01993/products/events/fullrun_ccd7_acisf01993_pi14-548_pass1_cl_src110_bgd.evt exist, delete to re-create
[Thu Oct 27 17:02:24 2011] Size of ../../acisf01993/products/events/fullrun_ccd7_acisf01993_pi14-548_pass1_cl_src110_src.evt.gz[events] = 1372 counts
[Thu Oct 27 17:02:24 2011] Mean chipx,y = (417.71, 663.32)
[Thu Oct 27 17:02:24 2011] Mean tdetx,y = (4334.71, 2365.32)
[Thu Oct 27 17:02:24 2011] chipx,y range = (394.00-441.00, 640.00-687.00)
[Thu Oct 27 17:02:24 2011] Size of ../../acisf01993/products/events/fullrun_ccd7_acisf01993_pi14-548_pass1_cl_src110_bgd.evt.gz[events] = 11513 counts
[Thu Oct 27 17:02:24 2011] ../../acisf01993/products/images/fullrun_ccd7_acisf01993_pi14-548_pass1_cl_src110_src.img and ../../acisf01993/products/images/fullrun_ccd7_acisf01993_pi14-548_pass1_cl_src110_bgd.img exist, delete to re-create
[Thu Oct 27 17:02:24 2011] ../../acisf01993/products/spectra/fullrun_ccd7_acisf01993_pi14-548_pass1_cl_src110_src.pi and ../../acisf01993/products/spectra/fullrun_ccd7_acisf01993_pi14-548_pass1_cl_src110_bgd.pi exist, delete to re-create
[Thu Oct 27 17:02:24 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Oct 27 17:02:27 2011] ../../acisf01993/products/lightcurves/fullrun_ccd7_acisf01993_pi14-548_pass1_cl_src110_src.lc and ../../acisf01993/products/lightcurves/fullrun_ccd7_acisf01993_pi14-548_pass1_cl_src110_bgd.lc exist, delete to re-create
[Thu Oct 27 17:09:42 2011] Keeping rmf generated by specextract
[Thu Oct 27 17:09:43 2011] 241.545
[Thu Oct 27 17:10:13 2011] Updating aperture counts using extracted products
[Thu Oct 27 17:10:13 2011] Error reading totcts from fullrun_ccd7_acisf01993_pi14-548_pass1_cl_src110_src.pi.gz
[Thu Oct 27 17:10:21 2011] Calculating source flux in energy range 0.30-8.00
[Thu Oct 27 17:10:21 2011] Using photon index=1.80, rate=0.0029, arf fullrun_ccd7_acisf01993_pi14-548_pass1_cl_src110.arf
[Thu Oct 27 17:10:21 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Oct 27 17:10:22 2011] Updating source flux to 3e-14
[Thu Oct 27 17:21:10 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting