[Thu Oct 27 16:34:27 2011] Detection parameters:
  Position = (1010.3, 216.4) = 14 40 25.75 -62 36 54.6
  Extent = 0.5" x 0.5", rotation angle = 162 degrees
  Source counts = 97.7 +/- 14.4
  Background counts = 110.3
  Rate = 0.001 +/- 0.0002

[Thu Oct 27 16:34:40 2011] Off-axis axis estimate = 3.70'
[Thu Oct 27 16:46:55 2011] Using EEF radius (= 0.75 ")to estimate initial spatial extent for simple fitting
[Thu Oct 27 16:46:55 2011] Initial guess for spatial extent in simple fitting = 0.75"
[Thu Oct 27 16:46:55 2011] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.985
[Thu Oct 27 16:46:55 2011] Giving source the simple spatial ID 26 for pass 0, mean size = 0.75"
[Thu Oct 27 16:47:01 2011] fullrun_ccd6_acisf01993_pi14-548_cl_pass0_src26.ximg exists
[Thu Oct 27 16:47:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf01993_pi14-548_cl_pass0_src26.csv
[Thu Oct 27 16:47:01 2011] fullrun_ccd6_acisf01993_pi14-548_cl_pass0_src26_1.ximg exists
[Thu Oct 27 16:47:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf01993_pi14-548_cl_pass0_src26.csv
[Thu Oct 27 16:47:01 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf01993_pi14-548_cl_pass0_src26_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf01993_pi14-548_cl_pass0_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct 27 16:47:05 2011] fullrun_ccd6_acisf01993_pi14-548_cl_pass0_tfrozen_src26.ximg exists
[Thu Oct 27 16:47:05 2011] fullrun_ccd6_acisf01993_pi14-548_cl_pass0_tfrozen_src26_1.ximg exists
[Thu Oct 27 16:47:05 2011] Fit fullrun_ccd6_acisf01993_pi14-548_cl_pass0_tfrozen_src26 appears to have run properly
[Thu Oct 27 16:47:59 2011] Source 23 is offset by 6.336734 and 5.447574 pixels which is larger than
2 X fitted extent = 6.097561 x 6.097561, not incorporating fit results
[Thu Oct 27 16:47:59 2011] Vigneting correction estimate = 1.000000
[Thu Oct 27 16:47:59 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct 27 16:47:59 2011] Assessing source extent using major
[Thu Oct 27 16:47:59 2011] Source does appear to be extended
[Thu Oct 27 16:47:59 2011] Computing asymmetry using major and minor axis, asym = 1.02
[Thu Oct 27 16:49:03 2011] Using EEF radius (= 0.75 ")to estimate initial spatial extent for simple fitting
[Thu Oct 27 16:49:03 2011] Initial guess for spatial extent in simple fitting = 0.75"
[Thu Oct 27 16:49:03 2011] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.985
[Thu Oct 27 16:49:03 2011] Giving source the simple spatial ID 24 for pass 1, mean size = 0.75"
[Thu Oct 27 16:49:05 2011] fullrun_ccd6_acisf01993_pi14-548_cl_pass1_src24.ximg exists
[Thu Oct 27 16:49:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf01993_pi14-548_cl_pass1_src24.csv
[Thu Oct 27 16:49:05 2011] fullrun_ccd6_acisf01993_pi14-548_cl_pass1_src24_1.ximg exists
[Thu Oct 27 16:49:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf01993_pi14-548_cl_pass1_src24.csv
[Thu Oct 27 16:49:05 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf01993_pi14-548_cl_pass1_src24_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf01993_pi14-548_cl_pass1_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct 27 16:49:07 2011] fullrun_ccd6_acisf01993_pi14-548_cl_pass1_tfrozen_src24.ximg exists
[Thu Oct 27 16:49:07 2011] fullrun_ccd6_acisf01993_pi14-548_cl_pass1_tfrozen_src24_1.ximg exists
[Thu Oct 27 16:49:07 2011] Fit fullrun_ccd6_acisf01993_pi14-548_cl_pass1_tfrozen_src24 appears to have run properly
[Thu Oct 27 16:49:50 2011] Spatial fit model total counts = 851.179000, observed total counts = 852.000000
[Thu Oct 27 16:49:50 2011] Offset between fit and detection position for source 23 = 0.122992 pixels
[Thu Oct 27 16:49:50 2011] 809.451100 total counts/ 744.739000 bgd. counts: snr = 2.371283
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 0.122992 pixels
  Position = (1010.4, 216.3) = 14 40 25.78 -62 36 54.9
  Extent = 0.8 (0.6-1.3)", rotation angle = 0
  Source counts = 64.7 +/- 28.5
  Background counts = 744.7
  Rate = 0.0007 +/- 0.0003
[Thu Oct 27 16:49:50 2011] Vigneting correction estimate = 1.000000
[Thu Oct 27 16:49:50 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct 27 16:49:50 2011] Assessing source extent using major axis lower bound
[Thu Oct 27 16:49:50 2011] Source does appear to be extended
[Thu Oct 27 16:49:50 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct 27 16:49:50 2011] Source is confused with source 8
[Thu Oct 27 16:54:03 2011] Not overwriting source region fullrun_ccd6_acisf01993_pi14-548_pass1_cl_src23_src.reg
[Thu Oct 27 16:54:03 2011] Extracting stamp from image fullrun_ccd6_acisf01993_pi14-548_cl_sm2.00.img.gz, (974, 180) - (1047, 253)
[Thu Oct 27 16:54:03 2011] Writing fullrun_ccd6_acisf01993_pi14-548_pass1_cl_src23.gif
[Thu Oct 27 16:55:20 2011] ../../acisf01993/products/events/fullrun_ccd6_acisf01993_pi14-548_pass1_cl_src23_src.evt and ../../acisf01993/products/events/fullrun_ccd6_acisf01993_pi14-548_pass1_cl_src23_bgd.evt exist, delete to re-create
[Thu Oct 27 16:55:20 2011] Size of ../../acisf01993/products/events/fullrun_ccd6_acisf01993_pi14-548_pass1_cl_src23_src.evt.gz[events] = 459 counts
[Thu Oct 27 16:55:20 2011] Mean chipx,y = (964.60, 175.67)
[Thu Oct 27 16:55:20 2011] Mean tdetx,y = (3839.60, 1877.67)
[Thu Oct 27 16:55:20 2011] chipx,y range = (943.00-986.00, 153.00-198.00)
[Thu Oct 27 16:55:20 2011] Size of ../../acisf01993/products/events/fullrun_ccd6_acisf01993_pi14-548_pass1_cl_src23_bgd.evt.gz[events] = 21 counts
[Thu Oct 27 16:55:20 2011] ../../acisf01993/products/images/fullrun_ccd6_acisf01993_pi14-548_pass1_cl_src23_src.img and ../../acisf01993/products/images/fullrun_ccd6_acisf01993_pi14-548_pass1_cl_src23_bgd.img exist, delete to re-create
[Thu Oct 27 16:55:20 2011] ../../acisf01993/products/spectra/fullrun_ccd6_acisf01993_pi14-548_pass1_cl_src23_src.pi and ../../acisf01993/products/spectra/fullrun_ccd6_acisf01993_pi14-548_pass1_cl_src23_bgd.pi exist, delete to re-create
[Thu Oct 27 16:55:20 2011] Not generating rmf since there are only 64 counts
[Thu Oct 27 16:55:23 2011] ../../acisf01993/products/lightcurves/fullrun_ccd6_acisf01993_pi14-548_pass1_cl_src23_src.lc and ../../acisf01993/products/lightcurves/fullrun_ccd6_acisf01993_pi14-548_pass1_cl_src23_bgd.lc exist, delete to re-create
[Thu Oct 27 16:57:34 2011] 210.102
[Thu Oct 27 17:10:05 2011] Updating aperture counts using extracted products
[Thu Oct 27 17:10:05 2011] Error reading totcts from fullrun_ccd6_acisf01993_pi14-548_pass1_cl_src23_src.pi.gz
[Thu Oct 27 17:10:08 2011] Calculating source flux in energy range 0.30-8.00
[Thu Oct 27 17:10:08 2011] Using photon index=1.80, rate=0.000704, arf fullrun_ccd6_acisf01993_pi14-548_pass1_cl_src23.arf
[Thu Oct 27 17:10:08 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Oct 27 17:10:08 2011] Updating source flux to 8.9e-15
[Thu Oct 27 17:15:46 2011] Flag b found in src. 23 procflags, skipping spectral fitting
[Thu Oct 27 17:15:46 2011] Flag c found in src. 23 procflags, skipping spectral fitting
[Thu Oct 27 17:15:46 2011] Source 23 has fewer than 100.000000 counts, skipping spectral fitting