[Fri Oct 14 22:28:32 2011] Detection parameters:
  Position = (496.7, 579.4) = 5 47 56.79 -70 24 44.0
  Extent = 0.5" x 0.5", rotation angle = 170 degrees
  Source counts = 36.9 +/- 7.6
  Background counts = 21.1
  Rate = 0.0006 +/- 0.0001

[Fri Oct 14 22:28:34 2011] Off-axis axis estimate = 2.32'
[Fri Oct 14 22:30:00 2011] Using EEF radius (= 0.47 ")to estimate initial spatial extent for simple fitting
[Fri Oct 14 22:30:00 2011] Initial guess for spatial extent in simple fitting = 0.47"
[Fri Oct 14 22:30:00 2011] source mask rpix=0.9, npix_max = 8, mask sum = 9, frac = 1.072
[Fri Oct 14 22:30:00 2011] Giving source the simple spatial ID 30 for pass 0, mean size = 0.47"
[Fri Oct 14 22:30:02 2011] fullrun_ccd7_acisf01992_pi14-548_cl_pass0_src30.ximg exists
[Fri Oct 14 22:30:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf01992_pi14-548_cl_pass0_src30.csv
[Fri Oct 14 22:30:02 2011] fullrun_ccd7_acisf01992_pi14-548_cl_pass0_src30_1.ximg exists
[Fri Oct 14 22:30:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf01992_pi14-548_cl_pass0_src30.csv
[Fri Oct 14 22:30:02 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf01992_pi14-548_cl_pass0_src30_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf01992_pi14-548_cl_pass0_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 14 22:30:03 2011] fullrun_ccd7_acisf01992_pi14-548_cl_pass0_tfrozen_src30.ximg exists
[Fri Oct 14 22:30:03 2011] fullrun_ccd7_acisf01992_pi14-548_cl_pass0_tfrozen_src30_1.ximg exists
[Fri Oct 14 22:30:03 2011] Fit fullrun_ccd7_acisf01992_pi14-548_cl_pass0_tfrozen_src30 appears to have run properly
[Fri Oct 14 22:30:20 2011] Spatial fit model total counts = 271.264000, observed total counts = 268.000000
[Fri Oct 14 22:30:20 2011] Offset between fit and detection position for source 42 = 3.344684 pixels
[Fri Oct 14 22:30:20 2011] 276.676100 total counts/ 184.888000 bgd. counts: snr = 6.750439
Spatial fit parameters:
  Offset between fit and detection position for source 42 = 3.344684 pixels
  Position = (495.7, 576.2) = 5 47 56.93 -70 24 45.8
  Extent = 1.4 (1.3-1.5)", rotation angle = 0
  Source counts = 91.8 +/- 16.6
  Background counts = 184.9
  Rate = 0.002 +/- 0.0003
[Fri Oct 14 22:30:20 2011] Source 42 is offset by -1.126742 and -1.651748 pixels which is larger than
2 X fitted extent = 0.482183 x 0.482183, not incorporating fit results
[Fri Oct 14 22:30:20 2011] Vigneting correction estimate = 1.000000
[Fri Oct 14 22:30:20 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 14 22:30:20 2011] Assessing source extent using major axis lower bound
[Fri Oct 14 22:30:20 2011] Source does appear to be extended
[Fri Oct 14 22:30:20 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 14 22:30:20 2011] Source is confused with source 39
[Fri Oct 14 22:30:45 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct 14 22:30:45 2011] Initial guess for spatial extent in simple fitting = 1.44"
[Fri Oct 14 22:30:45 2011] source mask rpix=2.9, npix_max = 47, mask sum = 28, frac = 0.593
[Fri Oct 14 22:30:45 2011] Giving source the simple spatial ID 29 for pass 1, mean size = 1.44"
[Fri Oct 14 22:30:48 2011] fullrun_ccd7_acisf01992_pi14-548_cl_pass1_src29.ximg exists
[Fri Oct 14 22:30:48 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd7_acisf01992_pi14-548_cl_pass1_src29.csv
[Fri Oct 14 22:30:48 2011] fullrun_ccd7_acisf01992_pi14-548_cl_pass1_src29_1.ximg exists
[Fri Oct 14 22:30:48 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd7_acisf01992_pi14-548_cl_pass1_src29.csv
[Fri Oct 14 22:30:48 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf01992_pi14-548_cl_pass1_src29_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf01992_pi14-548_cl_pass1_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 14 22:30:49 2011] fullrun_ccd7_acisf01992_pi14-548_cl_pass1_tfrozen_src29.ximg exists
[Fri Oct 14 22:30:49 2011] fullrun_ccd7_acisf01992_pi14-548_cl_pass1_tfrozen_src29_1.ximg exists
[Fri Oct 14 22:30:49 2011] Fit fullrun_ccd7_acisf01992_pi14-548_cl_pass1_tfrozen_src29 appears to have run properly
[Fri Oct 14 22:31:07 2011] Source 42 is offset by 6.255819 and -3.319390 pixels which is larger than
2 X fitted extent = 0.559362 x 0.559362, not incorporating fit results
[Fri Oct 14 22:31:07 2011] Warning: source 29 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 42 at 14.434745 pixels away
[Fri Oct 14 22:31:07 2011] Vigneting correction estimate = 1.000000
[Fri Oct 14 22:31:07 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 14 22:31:07 2011] Assessing source extent using major axis lower bound
[Fri Oct 14 22:31:07 2011] Source does appear to be extended
[Fri Oct 14 22:31:07 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 14 22:33:28 2011] Not overwriting source region fullrun_ccd7_acisf01992_pi14-548_pass1_cl_src42_src.reg
[Fri Oct 14 22:33:28 2011] Extracting stamp from image fullrun_ccd7_acisf01992_pi14-548_cl_sm2.00.img.gz, (430, 510) - (562, 642)
[Fri Oct 14 22:33:28 2011] Writing fullrun_ccd7_acisf01992_pi14-548_pass1_cl_src42.gif
[Fri Oct 14 22:35:28 2011] ../../acisf01992/products/events/fullrun_ccd7_acisf01992_pi14-548_pass1_cl_src42_src.evt and ../../acisf01992/products/events/fullrun_ccd7_acisf01992_pi14-548_pass1_cl_src42_bgd.evt exist, delete to re-create
[Fri Oct 14 22:35:28 2011] Size of ../../acisf01992/products/events/fullrun_ccd7_acisf01992_pi14-548_pass1_cl_src42_src.evt.gz[events] = 406 counts
[Fri Oct 14 22:35:28 2011] Mean chipx,y = (494.96, 574.83)
[Fri Oct 14 22:35:28 2011] Mean tdetx,y = (4411.96, 2276.83)
[Fri Oct 14 22:35:28 2011] chipx,y range = (469.00-524.00, 546.00-600.00)
[Fri Oct 14 22:35:28 2011] Size of ../../acisf01992/products/events/fullrun_ccd7_acisf01992_pi14-548_pass1_cl_src42_bgd.evt.gz[events] = 987 counts
[Fri Oct 14 22:35:28 2011] ../../acisf01992/products/images/fullrun_ccd7_acisf01992_pi14-548_pass1_cl_src42_src.img and ../../acisf01992/products/images/fullrun_ccd7_acisf01992_pi14-548_pass1_cl_src42_bgd.img exist, delete to re-create
[Fri Oct 14 22:35:28 2011] ../../acisf01992/products/spectra/fullrun_ccd7_acisf01992_pi14-548_pass1_cl_src42_src.pi and ../../acisf01992/products/spectra/fullrun_ccd7_acisf01992_pi14-548_pass1_cl_src42_bgd.pi exist, delete to re-create
[Fri Oct 14 22:35:28 2011] Not generating rmf since there are only 91 counts
[Fri Oct 14 22:35:32 2011] ../../acisf01992/products/lightcurves/fullrun_ccd7_acisf01992_pi14-548_pass1_cl_src42_src.lc and ../../acisf01992/products/lightcurves/fullrun_ccd7_acisf01992_pi14-548_pass1_cl_src42_bgd.lc exist, delete to re-create
[Fri Oct 14 22:37:06 2011] 232.949
[Fri Oct 14 22:37:12 2011] Updating aperture counts using extracted products
[Fri Oct 14 22:37:12 2011] Error reading totcts from fullrun_ccd7_acisf01992_pi14-548_pass1_cl_src42_src.pi.gz
[Fri Oct 14 22:37:12 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 14 22:37:12 2011] Using photon index=1.80, rate=0.00158, arf fullrun_ccd7_acisf01992_pi14-548_pass1_cl_src42.arf
[Fri Oct 14 22:37:12 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 14 22:37:12 2011] Updating source flux to 1.3e-14
[Fri Oct 14 22:37:45 2011] Flag b found in src. 42 procflags, skipping spectral fitting
[Fri Oct 14 22:37:45 2011] Flag c found in src. 42 procflags, skipping spectral fitting
[Fri Oct 14 22:37:45 2011] Source 42 has fewer than 100.000000 counts, skipping spectral fitting